Skip to main content


Hard Shell
Part # 520-026
125-001 Maintenance and Repair Log Book with Pen
Logbook w/ pen
Part # 125-001
Manual 18/28
This is your operations and maintenance manual. It is a writable USB flash drive which enables you to add or subtract the manual PDF sections as they are updated or when you purchase new Kirby Morgan products.
Part # 100-002
200-017 Overpressure Relief Valve
Overpressure Relief Valve
The Kirby Morgan® Overpressure Relief Valve is factory adjusted to vent any time the pressure in the low pressure hose connecting the bailout bottle to your emergency valve exceeds 200 P.S.I. It is installed in any of the low pressure ports in the first stage regulator.
Part # 200-017
Restrictor Adapter
The 555-210 Restrictor Adapter should be used when an inflation hose is attached to the side block when drysuit diving. The main purpose of the Restrictor Adapter is to limit gas flow in the event the hose ruptures or is severed, and to ensure the loss of supply would not be great enough to significantly affect the diver’s breathing at moderate to heavy work rates. It also helps prevent filling the dry suit too rapidly.   NOTE: O-ring 310-003 is required to install the Restrictor Adaptor onto the side block.  
Part # 555-210


455 Regulator
Conversion Kit, 455 Regulator for 350/450 Regulators
Part # : 525-765
Hot Water Shroud
Hot Water Shroud Kit for SL Helmets, KM 37/57 & KMB® 18/28
Part # : 525-100
Hood and Face Seal
KMB® 28 Hood and Face Seal (L/L)
Part # : 525-733
Hood and Face Seal
KMB® 28 Hood and Face Seal (L/M)
Part # : 525-732
Hood and Face Seal
KMB® 28 Hood and Face Seal (S/M)
Part # : 525-731
Hood and Face Seal
KMB® 28 Hood and Face Seal (S/S)
Part # : 525-730
Molded face Seal
KMB® Molded Face Seal Replacement Kit
Part # : 525-725
Lens Retainer Kit
Lens Retainer Kit
Part # : 525-776
Oral Nasal With Lens Retainer Kit
Oral Nasal With Lens Retainer Kit
Part # : 525-775
SuperFlow® 350 Regulator Assembly Kit
Part # : 525-771
Welding Lens Assembly
Weld Lens Kit
Part # : 525-403
Welding Shield Assembly
Welding Shield Assembly
Part # : 525-400