A salute to the Kirby Morgan Commercial Air Helmet-1, the new OctoHelm shirt takes our innovation to new depths! Made in the USA, on an incredibly comfortable and durable, 50% cotton 50% polyester black t-shirt. On the front pocket is the Kirby Morgan diamond logo. Printed on American Apparel Rep your line of work with the Kirby Morgan® BandMask® t-shirt. Made with an extremely comfortable tri-blend shirt, the 50% cotton 25% polyester 25% rayon... Read More
-
Products
Kirby Morgan offers a wide variety of spare parts kits, rebuild and upgrade kits, from the most basic O-ring kits and soft goods kits, all the way up to the largest “Overseas” Spares Kits which contain numerous spare parts and also include many of the smaller kits.
This is a complete list of Kirby Morgan® Regulators, from the time honored Superflow “B” regulator that’s been the standard on our SuperLite® 17B Helmet for over three decades, to our easy breathing SCUBA regulators (plastic or metal), to the highest performance commercial diving helmet and full face mask regulators available in the world (see REX & EXO®BR).
Kirby Morgan News
455 Balanced Regulator, Balanced Scuba Regulator, BandMask 18, BandMask 28, EXO 26 Original, EXO BR, EXO-BR Mask, First Stage w/Balanced Second Stage Regulator Assembly, Full Face Mask Regulators, Helmet & Mask Regulators, Kirby Morgan 37, Kirby Morgan 37SS, Kirby Morgan 47, Kirby Morgan 57, Kirby Morgan 77, Kirby Morgan 97, KMACS 5 No Communications, KMACS 5 With Communications, M-48 MOD-1, M-48 SuperMask, Metal SuperFlow Scuba Regulator, Plastic SuperFlow Scuba Regulator, Scuba Regulators, SuperFlow 350 Regulator, SuperFlow 450 Regulator, SuperFlow First Stage Regulator, SuperFlow Regulator, SuperFlow Scuba Nonadjustable Regulator (Octopus), SuperFlow Scuba Regulator Assembly w/Metal Adjustable 2nd Stage, SuperFlow Scuba Regulator Assembly w/Plastic Adjustable 2nd Stage, SuperLite 17B, SuperLite 17C, SuperLite 27 , The Rex Regulator
Step by step instructions about how to install an earphone and microphone on the new Kirby Morgan Communications Module with Male Waterproof Connector. Visit bulletin #2 of 2019 for detailed information about the new parts here
Kirby Morgan® introduces a newly designed communication module, new strip assembly and strip retainer plate. Your existing male waterproof connector or two wire posts will work with the newly designed parts. The newly designed communication assembly will be a direct replacement of the older style. The new communications body has thicker module walls, adding to the strength of the module, and a removable strip assembly. This removable strip... Read More
New products now available on the Kirby Morgan Apparel site featuring shirts, hats, and other accessories. Visit the Kirby Morgan Apparel site here.
455 Balanced Regulator, Balanced Scuba Regulator, BandMask 18, BandMask 28, EXO 26 Original, EXO BR, EXO-BR Mask, First Stage w/Balanced Second Stage Regulator Assembly, Full Face Mask Regulators, Helmet & Mask Regulators, Kirby Morgan 37, Kirby Morgan 37SS, Kirby Morgan 47, Kirby Morgan 57, Kirby Morgan 77, Kirby Morgan 97, KMACS 5 No Communications, KMACS 5 With Communications, M-48 MOD-1, M-48 SuperMask, Metal SuperFlow Scuba Regulator, Plastic SuperFlow Scuba Regulator, Scuba Regulators, SuperFlow 350 Regulator, SuperFlow 450 Regulator, SuperFlow First Stage Regulator, SuperFlow Regulator, SuperFlow Scuba Nonadjustable Regulator (Octopus), SuperFlow Scuba Regulator Assembly w/Metal Adjustable 2nd Stage, SuperFlow Scuba Regulator Assembly w/Plastic Adjustable 2nd Stage, SuperLite 17B, SuperLite 17C, SuperLite 27 , The Rex Regulator
What exactly is a Water Shroud? For years Kirby Morgan has been interested in the advantages of a water shroud that incorporates a constant water supply to create a flushing mechanism. Introducing the newly released Kirby Morgan 525-761 Water Shroud Kit for the KM 97. As a steady supply of “clean” water is fed to the side block, the 525-761 Water Shroud Kit blocks the surrounding water as well as unwanted debris from coming in contact with the... Read More
Step by step instructions about how to convert your Kirby Morgan Superflow® 350 Regulator to 455 Balanced Regulator on a KM 37, KM 57, SL 17C, or SL 27®. Visit the 525-765 Conversion Kit, 455 Regulator For 350/450 Regs here
An attachable hood kit is now available for the M-48 MOD-1 modular full face mask. The hood is attached to the mask with brackets and screws. A short rear zipper and earphone pockets are standard. The hood is made out of 5 mm YAMAMOTO neoprene. The kit is available in two sizes: small/medium and large/extra large. The kit is sold separately and will not be installed by Kirby Morgan®. The new hood is only for the M-48 MOD-1 and will not fit the M... Read More
An attachable hood kit is now available for the M-48 MOD-1 modular full face mask. The hood is attached to the mask with brackets and screws. A short rear zipper and earphone pockets are standard. The hood is made out of 5 mm YAMAMOTO neoprene. The kit is available in two sizes: small/medium and large/extra large. The kit is sold separately and will not be installed by Kirby Morgan®. The new hood is only for the M-48 MOD-1 and will not fit the M... Read More
Step by step instructions about how to replace earphone speakers on Kirby Morgan communication assemblies. Both English and Spanish versions are included.
New series by Kirby Morgan showing a behind the scenes look at how high quality genuine parts are made. Bishop Pins (Part #550-074) are used in our new water shroud kit for the KM97 to help hold the access cover shut over the regulator shroud. Bishop Pins will also be used in future products. For more details, please go to the Water Shroud Kit for the Kirby Morgan® 97.
Kirby Morgan® introduces the Water Shroud Kit for the KM 97. The water shroud kit can be used for both traditional hot water applications and in dirty or debris laden water, using a constant water supply for increased protection of key helmet components.
Step by step instructions for how to clean and maintain Kirby Morgan stainless steel helmet shells and other products.
Step by step instructions for how to install the new Kirby Morgan® 97 Water Shroud Kit. While this kit is specific to the KM 97, additional kits in the future will be available for the SL 17C, 27® and KM 37 Helmets, KMB® 18 and 28 BandMasks that are equipped with a 455 Balanced Regulator.
Step by step instructions for how to stuff and install a Kirby Morgan® Head Cushion. Both English and Spanish versions are included.
There are two ways to check a one way valve on a Kirby Morgan Dive Helmet or BandMask®. The one way valve should be checked prior to the start of diving or every 24 hours if in continuous use. Oral One Way Valve Check -Test the one way valve for proper operation by blowing and sucking (cycling) on the umbilical adapter. No gas should be drawn through the one way valve. If you are able to suck any air through the one way valve, it is not working... Read More
Step by step instructions for how to install a Kirby Morgan® BandMask® Hood.
Step by step instructions about how to mount open circuit regulators to a Kirby Morgan Scuba Pod.
Kirby Morgan has modified the design of the SL 27® Tri Valve Exhaust Main Body, P/N 510-759, for an improved fit. There is no change in part number. The re-designed 510-759 Exhaust Main Body has been shipping on SuperLite® 27® Helmets since February this year. There is no change in price for the 510-759 Tri Valve Exhaust Main Body. No exchange program will be offered for this part or any of the products listed above. Please contact your local... Read More
Step by step instructions for how to remove a Kirby Morgan BandMask® 28 Hood with 455 balanced regulator.
How To: Kirby Morgan Molded Face Seal Replacement