Home > Support > Manuals & Exploded Views

Manuals & Exploded Views

Manuals & Exploded Views

1

Please choose a Kirby Morgan product from the selected list below e.g. KM37. Then choose your resolution preference.

2

Select "All" on the top checkbox to download all, or select specific manuals.

3

Click "Download Manual" button. The download process will be prompted with a file name confirmation; if you are happy with the file name click "Next" to complete your download. The downloaded link will now be available on the top of the page.

Operations
File Page Updated Size
General Information KMDSI Products INFO 07/25/19 3.14 MB
Description and Operational Specifications DOS 07/25/19 7.51 MB
General Preventative Maintenance GENPRE 07/25/19 780.62 KB
Inspection and Maintenance IM 07/25/19 104.83 KB
Quad Valve and Tri-Valve® Exhaust QUAD 07/25/19 2.77 MB
BandMask Tri-Valve Exhaust BTRI 07/25/19 2.31 MB
SL 27® Water Dump 27WTR 07/25/19 1.09 MB
One Way Valve OWV 07/25/19 1000.91 KB
Oral Nasal Mask (350/450/455) ON 07/25/19 640.19 KB
Overpressure Relief Valve OPRV 07/25/19 289.91 KB
Stainless Steel Helmets with SuperFlow® 350 or 455 Balanced Regulator Pod POD 07/25/19 4.54 MB
Stainless Steel Helmets with REX Pod REXPOD 07/25/19 3.7 MB
Bent Tube BNT 07/25/19 2.93 MB
SuperFlow® Regulator SF 07/25/19 6.35 MB
SuperFlow® 350 Regulator SF350 07/25/19 6.78 MB
SuperFlow® 450 Regulator SF450 07/25/19 7.9 MB
455 Balanced Regulator 455BAL 07/25/19 15.94 MB
REX Regulator and Oral Nasal REX 07/25/19 6.47 MB
Face Port, Port Retainer and Nose Block FCPRT 07/25/19 2.45 MB
BandMask Hood, Face Seal, Band Keepers and Head Harness HBNK 07/25/19 11.36 MB
Handle on Fiberglass Helmets HNDL 07/25/19 649.45 KB
Handle on Stainless Steel Helmets SSHNDL 07/25/19 1.29 MB
Neck Ring Assembly, Locking Collar and Front Stand Offs NKDM 07/25/19 4.23 MB
Chin Strap, Sealed Pull Pins and Swing Catch for Fiberglass Helmets BTM 07/25/19 4.5 MB
Snap Tabs, Chin Strap, Swing Catch, Sealed Pull Pins Stainless Steel SSBTM 07/25/19 6.49 MB
SuperLite® 17B Neck Clamp Area 17BNK 07/25/19 3.84 MB
Head Cushion, Head Cushion Foam Spacer (HCFS) and Chin Cushion HDCSH 07/25/19 2.41 MB
17B Head Cushion 17BHC 07/25/19 834.82 KB
Brass/Chromed Brass Side Block SB 07/25/19 3.01 MB
Stainless Steel Side Block SSB 07/25/19 6.88 MB
Communications, Modular COM 08/26/19 14.74 MB
Communications on SuperLite® 17B and 17C Helmets, KMB 18 and 28 BandMasks® 17COM 07/25/19 5.76 MB
Accessories ACC 07/25/19 2.55 MB
Hot Water Shroud HWS 07/25/19 1.47 MB
Weights WGHTS 07/25/19 856.67 KB
17B Handle and Weights 17BHDL 07/25/19 1.07 MB
17C Handle and Side Weight 17C 07/25/19 2.2 MB
Torque Specs & Supply Pressure Requirements APNDX 09/10/19 1.09 MB
SL 17B Blowapart (high-res) 07/30/19 2.97 MB
SL 17C Blowapart (high-res) 07/30/19 2.51 MB
SL 27® Blowapart (high-res) 07/30/19 2.58 MB
KM 37 Blowapart (high-res) 07/30/19 2.73 MB
KM 37SS Blowapart (high-res) 08/20/19 2.34 MB
KM 47 Blowapart (high-res) 07/30/19 2.42 MB
KM 57 BlowApart (high res) 07/30/19 2.58 MB
KM 77 Blowapart (high-res) 08/20/19 2.21 MB
KM 97 Blowapart (high-res) 09/13/19 2.35 MB
KMB 18 Blowapart (high-res) 07/30/19 1.95 MB
M-48 Mod-1 BlowApart (high-res) 07/30/19 1.27 MB
M-48 SuperMask BlowApart (high-res) 07/30/19 1.29 MB
Scuba Pod Assembly w/ Tilt-to- Purge BlowApart (high-res) 07/30/19 896.58 KB
Scuba POD w/Balanced Purge Tube BlowApart (high-res) 07/30/19 850.46 KB
EXO Standard and Original BlowApart 07/30/19 1.26 MB
KMACS 5 BlowApart (high-res) 07/30/19 10.09 MB
[OLD] Communication Assemblies BlowApart (high-res) 07/30/19 803.74 KB
Neck Ring Assemblies BlowApart (high-res) 07/30/19 495.91 KB
Side Block BlowApart (high-res) 07/30/19 685.25 KB
SL 17C and 27 Neck Ring Assemblies BlowApart (high-res) 07/30/19 763.97 KB
Stainless Steel Locking Collar BlowApart (high-res) 07/30/19 271.79 KB
Stainless Steel Side Block BlowApart (high-res) 09/13/19 1.24 MB
505-008 SL 17A/B Neck Clamp/Yoke Assembly BlowApart (high-res) 07/30/19 1.41 MB
SuperFlow® Regulator BlowApart (high-res) 07/30/19 1.85 MB
KMB 28 Blowapart (high-res) 07/30/19 1.79 MB
Rebreather Pod BlowApart (high-res) 07/30/19 828.78 KB
Switchover Regulator BlowApart (high-res) 07/30/19 1005.7 KB
Communication Assemblies (high-res) 08/19/19 715.26 KB
Manifold Block BlowApart (high-res) 07/30/19 1.56 MB
SuperFlow® 350 BlowApart (high-res) 07/30/19 1.16 MB
SuperFlow® 450 Regulator BlowApart (high-res) 07/30/19 792.79 KB
REX Regulator BlowApart (high-res) 07/30/19 1.46 MB
455 Balanced Regulator BlowApart (high-res) 09/13/19 1.8 MB
SuperFlow® First Stage Regulator BlowApart (high-res) 07/30/19 698.79 KB
Balanced Scuba Regulator BlowApart (high-res) 07/30/19 793.88 KB
Metal SuperFlow® Scuba Regulator BlowApart (high-res) 07/30/19 1.94 MB
Plastic SuperFlow® Scuba Regulator BlowApart (high-res) 07/30/19 1.35 MB
Plastic Non-Adjustable Second Stage SCUBA Regulator (Octopus) BlowApart (high-res) 07/30/19 2.05 MB
Copyright 07/30/19 34.49 KB
User Guides Size Updated
M-48 Mod-1 User Guide (high-res) 7.1 MB 05/03/19
M-48 Mod-1 User Guide (low-res) 2.51 MB 05/03/19
Rebreather POD (high-res) 2.62 MB 11/30/18
Rebreather POD (low-res) 1.19 MB 11/30/18
Diver's Manifold Block (low-res) 883.13 KB 10/09/18
Diver's Manifold Block (high-res) 2.31 MB 10/09/18
Switchover Regulator (low-res) 928.13 KB 03/13/18
Switchover Regulator (high-res) 1.06 MB 03/13/18

Select any filter and click on Apply to see results

Select any filter and click on Apply to see results

Select any filter and click on Apply to see results

Select any filter and click on Apply to see results

Select any filter and click on Apply to see results

SL 17A [Discontinued]
Manuals Updated
Introduction - Contents & Definition of Signal Words Used in this Manual 11/29/17
Chapter 1.0 - General Information KMDSI Products 11/29/17
Chapter 2.0 - Description & Operational Specifications - SuperLite®-17B 11/29/17
Chapter 3.0 - Operating Instructions 11/29/17
Chapter 4.0 - Troubleshooting 11/29/17
Chapter 5.0 - Inspection and Maintenance 11/29/17
Chapter 6.0 - General Preventative Maintenance 11/29/17
Chapter 7.0 - Breathing System Maintenance and Repairs 11/29/17
Chapter 8.0 - Corrective Maintenance 11/29/17
Chapter 9.0 - Accessories for the SuperLite®-17B 11/29/17
Appendix- Torque Specifications, Maintenance and Inspection Procedures and Supply Pressure Requirements & Tables 11/29/17
Complete Manual 11/29/17
17A/B BlowApart 11/29/17
SL 17K [Discontinued]
Manuals Updated
Introduction - Contents & Definition of Signal Words Used in this Manual 10/12/17
Chapter 1.0 - General Information KMDSI Products 10/12/17
Chapter 2.0 - Description & Operational Specifications - SL-17K 10/12/17
Chapter 3.0 - Operating Instructions 10/12/17
Chapter 4.0 - Troubleshooting 10/12/17
Chapter 5.0 - Inspection and Maintenance 10/12/17
Chapter 6.0 - General Preventative Maintenance 10/12/17
Chapter 7.0 - Breathing System Maintenance and Repairs 10/12/17
Chapter 8.0 - Corrective Maintenance 10/12/17
Chapter 9.0 - Accessories 10/12/17
Appendix- Torque Specifications, Maintenance and Inspection Procedures and Supply Pressure Requirements & Tables 10/12/17
Complete Manual 10/12/17
17K BlowApart 10/12/17
EXO-BR [Discontinued]
Manuals Updated
Introduction - Contents & Definition of Signal Words Used in this Manual 10/12/17
Chapter 1.0 - General Information KMDSI Products 10/12/17
Chapter 2.0 - Operating Instructions 10/12/17
Chapter 3.0 - Diving With The EXO® Full Face Mask 10/12/17
Chapter 4.0 - Post Dive Procedures And General Maintenance 10/12/17
Chapter 5.0 - EXO® Regulator Maintenance 10/12/17
Chapter 6.0 - Frame And Lens Repairs 10/12/17
Chapter 7.0 - Communications 10/12/17
Appendix- Breathing Gas Requirements EXO® Balance Regulator Full-Face Mask 10/12/17
Appendix II- EXO® Full-Face Mask Transport And Storage 10/12/17
Table of Equivalents 10/12/17
Complete Manual 10/12/17
EXO-BR BlowApart 10/12/17
EXO Standard and Original BlowApart [Discontinued]
Updated
EXO Standard and Original BlowApart 07/30/19
100-400 Two-Diver Air Intercom (P/N 415-107) User Guide [Discontinued]
Manuals Updated
100-400 Two-Diver Air Intercom (P/N 415-107) User Guide 10/12/17
KM 97 Blowapart [Low Resolution]
Monday, May 23, 2016
  1. Added the additional port on the stainless steel side block.
Friday, August 5, 2016
  1. Added the front stand off, associated screw part number and the complete kit part numbers.
Tuesday, September 20, 2016
  1. Switched the 510-796 exhaust valve back to the 510-776.
Wednesday, November 23, 2016
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
Wednesday, May 10, 2017
  1. Updated description on the 550-574 from, "spacer" to "sleeve" and updated the appearance of some components.
Wednesday, March 14, 2018
  1. Added in the P/N 550-577 Nose Block Guide and removed the 540-563 Port Retainer.
Friday, August 24, 2018
  1. Updated layout.
Tuesday, August 20, 2019
  1. Added P/N 540-563 Port Retainer.
Friday, September 13, 2019
  1. Added critical components P/N 560-517 Helmet Shell, Stainless Steel and P/N 520-004 Face Port.
Stainless Steel Side Block BlowApart - [Low Resolution]
Friday, August 24, 2018
  1. Updated layout.
Friday, September 13, 2019
  1. Added critical component P/N 555-117 Adapter.
455 Balanced Regulator BlowApart - [Low Resolution]
Tuesday, September 20, 2016
  1. Switched the 510-796 exhaust valve back to the 510-776.
Wednesday, December 28, 2016
  1. Removed "for the KM 97 Helmet" from the main description.
Tuesday, November 28, 2017
  1. Updated the material on the balance spacer.
Friday, August 24, 2018
  1. Updated layout.
Thursday, May 9, 2019
  1. Updated location #10 from, "Order 205-020" to, "220-050SS" and updated the description to, "Inlet Valve, Stainless Steel Tube."
Friday, September 13, 2019
  1. Added critical components P/N 240-008 Lever Arm and P/N 550-533 Bent Tube Adapter.
Sistemas de escape Quad-Valve y Tri-Valve® (Quad Valve and Tri-Valve® Exhaust) - [Low Resolution]
Tuesday, June 25, 2019
  1. Se actualizó el material de la válvula de escape 510-776.
Regulador REX y máscara buconasal (REX Regulator and Oral Nasal) - [Low Resolution]
Tuesday, June 25, 2019
  1. Se actualizó el material de la válvula de escape 510-776.
Cascos de acero inoxidable con carcasa para el regulador REX (Stainless Steel Helmets with REX Pod) - [Low Resolution]
Tuesday, June 25, 2019
  1. Se actualizó el material de la válvula de escape 510-776.
Regulador SuperFlow® 350 (SuperFlow® 350 Regulator) - [Low Resolution]
Tuesday, June 25, 2019
  1. Se actualizó el material de la válvula de escape 510-776.
Cascos de acero inoxidable con regulador SuperFlow® 350 o regulador compensado 455 (Stainless Steel Helmets with SuperFlow® 350 or 455 Balanced Regulator Pod) - [Low Resolution]
Tuesday, June 25, 2019
  1. Se actualizó el material de la válvula de escape 510-776.
Regulador SuperFlow® 450 (SuperFlow® 450 Regulator) - [Low Resolution]
Tuesday, June 25, 2019
  1. Se actualizó el material de la válvula de escape 510-776.
Sistema de escape Tri-Valve de las máscaras BandMask (BandMask Tri-Valve Exhaust) - [Low Resolution]
Tuesday, June 25, 2019
  1. Se actualizó el material de la válvula de escape 510-776.
Tablas de pares de apriete y presiones de suministro (Torque Specs & Supply Pressure Requirements) - [Low Resolution]
Tuesday, September 10, 2019
  1. Números de ubicación actualizados debido a la adición de P/N 540-563 Retenedor de puerto en los cascos de acero inoxidable.
Torque Specs & Supply Pressure Requirements - [Low Resolution]
Thursday, December 10, 2015
  1. Updated torque specs throughout and changed type of Loctite® required on several parts.
Thursday, May 19, 2016
  1. Updated torque specs throughout and changed type of Loctite® needed.
Wednesday, July 20, 2016
  1. Updated the KM 57 location numbers and the 455 balanced regulator's P/N 530-099 Cover Retainer Screw torque.
Thursday, December 29, 2016
  1. Updated to accommodate the modularized BlowAparts.
Monday, April 24, 2017
  1. Updated the KM 47 locations due to its new modularity.
Tuesday, June 20, 2017
  1. Updated to accommodate the newly modular KMB 18, 28, SL 17B and 27 BlowAparts.
Monday, August 14, 2017
  1. Added note 3, allowable deviation: ± 8%.
Wednesday, August 23, 2017
  1. Updated communications BlowApart location numbers.
Tuesday, October 3, 2017
  1. Added P/N 550-560 Adjustment Lock Nut, REX to REX torque specs.
Friday, November 3, 2017
  1. Updated torque specs for the port retainer adapter and screw.
Thursday, March 15, 2018
  1. Added P/N 550-116 Nose Block Guide to fiberglass helmets and BandMask and updated location numbers due to adding the P/N 550-577 nose block guide to stainless steel helmets.
Tuesday, May 22, 2018
  1. Updated location numbers due to the removal of the P/N 550-076 inlet valve on the SuperFlow 350 BlowApart.
Thursday, December 20, 2018
  1. Updated location numbers due to the location change of the clamp and screw in both the SuperFlow and SuperFlow 350 BlowApart.
Friday, April 5, 2019
  1. Updated the 550-372 Regulator Mount Nut newton meter from 10 to 9. Added the 550-372 Regulator Mount Nut to the KM 77 torque tables. Changed, "Table 1" and, "Appendix 3 Table 3 SuperFlow® / SuperFlow® 350 Regulator High Pressure Regulated Source" to, "The corresponding low pressure supply table should be used whenever low pressure…" in the, "Supply Pressure Requirements & Tables" on page 4.
Tuesday, May 7, 2019
  1. Changed the torque of P/N 530-050 from 35 to 20. Updated the note about, "All pipe thread fittings…"
Tuesday, September 10, 2019
  1. Updated location numbers due to the addition of the P/N 540-563 Port Retainer in the stainless steel helmets.
Zona de la abrazadera del cuello del casco SuperLite® 17B (SuperLite® 17B Neck Clamp Area) - [Low Resolution]
Monday, August 5, 2019
  1. Se agregó una nota sobre el pasador de seguridad al ensamblaje del pestillo de cierre SuperLite® 17B 1.1, el pasador de extracción y se actualizó un poco la palabrería. Se agregó una nota sobre la correa de mentón interna a 1.4 SL 17B Chin Strap y Yoke Strap y se actualizó algo de verborrea. Título actualizado de 1.4.1 Remoción de la correa de la barbilla a 1.4.1 Reemplazo de la correa de la barbilla. Reemplazo de la correa de la barbilla 1.4.2 actualizado a 1.4.2 Instalación de la correa de la barbilla.
Sistema de comunicación modular (Communications, Modular) - [Low Resolution]
Monday, August 26, 2019
  1. Se agregó "La numeración de los 4 pines del conector macho es en sentido antihorario" y se actualizó el diagrama en la página COM-9.
Communications, Modular - [Low Resolution]
Monday, May 4, 2015
  1. Updated with auxiliary port and front stand offs.
Thursday, May 3, 2018
  1. Updated layout.
Thursday, October 18, 2018
  1. Added in the earphone replacement section and updated the MWPC and posts section.
Tuesday, February 19, 2019
  1. Corrected the wire lengths in the diagrams for the MWPS and two wire posts. Corrected eye and hand protection icons in caution block, they were switched.
Wednesday, March 27, 2019
  1. 515-019 earphone, left was incorrectly labeled earphone, right.
Monday, April 1, 2019
  1. Added in new communications module sections.
Monday, August 26, 2019
  1. Added, "Male 4 pin numbering is in a counter clockwise direction" and updated diagram on page COM-9.
KM 37SS Blowapart - [Low Resolution]
Monday, May 23, 2016
  1. Added the additional port on the stainless steel side block.
Friday, August 5, 2016
  1. Added the front stand off, associated screw part number and the complete kit part numbers.
Wednesday, November 23, 2016
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
Wednesday, May 10, 2017
  1. Updated description on the 550-574 from, "spacer" to "sleeve" and updated the appearance of some components.
Wednesday, March 14, 2018
  1. Added in the P/N 550-577 Nose Block Guide and removed the 540-563 Port Retainer.
Wednesday, August 22, 2018
  1. Updated layout.
Tuesday, August 20, 2019
  1. Added P/N 540-563 Port Retainer.
KM 77 Blowapart - [Low Resolution]
Monday, May 23, 2016
  1. Added the additional port on the stainless steel side block.
Friday, August 5, 2016
  1. Added the front stand off, associated screw part number and the complete kit part numbers.
Wednesday, November 23, 2016
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
Wednesday, May 10, 2017
  1. Updated the appearance of components to maintained consistency with the other stainless steel helmets.
Wednesday, March 14, 2018
  1. Added in the P/N 550-577 Nose Block Guide and removed the 540-563 Port Retainer.
Friday, August 24, 2018
  1. Updated layout.
Friday, March 8, 2019
  1. Changed the 555-172 KM 77 Bent Tube to 555-167 47/77 Bent Tube and changed the 555-173 KM 77 Bent Tube w/ O-rings to 555-168 Bent Tube Assembly w/O-rings.
Tuesday, August 20, 2019
  1. Added P/N 540-563 Port Retainer.
Communication Assemblies BlowApart - [Low Resolution]
Monday, August 19, 2019
  1. Removed the strip assembly 515-105 as a purchasable item and added the 515-125 strip assembly with screws.
Regulador SuperFlow® (SuperFlow® Regulator) - [Low Resolution]
Tuesday, July 30, 2019
Sistema de comunicación de los cascos SuperLite® 17B y 17C, y las máscaras BandMask® KMB 18 y 28 (Communications on SuperLite® 17B and 17C Helmets, KMB 18 and 28 BandMasks®) - [Low Resolution]
Tuesday, July 30, 2019
Tubo curvado (Bent Tube) - [Low Resolution]
Tuesday, July 30, 2019
Válvula antirretorno (One Way Valve) - [Low Resolution]
Tuesday, July 30, 2019
Válvula de sobrepresión (Overpressure Relief Valve) - [Low Resolution]
Tuesday, July 30, 2019
Accesorios (Accessories) - [Low Resolution]
Monday, July 29, 2019
Agarradera de los cascos de acero inoxidable (Handle on Stainless Steel Helmets) - [Low Resolution]
Monday, July 29, 2019
Visor, marco de retención del visor y bloqueador nasal (Face Port, Port Retainer and Nose Block) - [Low Resolution]
Tuesday, July 30, 2019
Agarradera de los cascos de fibra de vidrio (Handle on Fiberglass Helmets) - [Low Resolution]
Monday, July 29, 2019
Agarradera y contrapesos del casco 17B (17B Handle and Weights) - [Low Resolution]
Monday, July 29, 2019
Bloque lateral de latón y latón cromado (Brass/Chromed Brass Side Block) - [Low Resolution]
Tuesday, July 30, 2019
Almohadilla para la cabeza del casco 17B (17B Head Cushion) - [Low Resolution]
Monday, July 29, 2019
Capucha, sello facial, guardas de las bandas y arnés para la cabeza de las máscaras BandMask (BandMask Hood, Face Seal, Band Keepers and Head Harness) - [Low Resolution]
Tuesday, July 30, 2019
Almohadilla para la cabeza, separador de espuma de la almohadilla para la cabeza (SEAC) y almohadilla para el mentón (Head Cushion, Head Cushion Foam Spacer (HCFS) and Chin Cushion) - [Low Resolution]
Tuesday, July 30, 2019
Agarradera y contrapeso lateral del casco 17C (17C Handle and Side Weight) - [Low Resolution]
Monday, July 29, 2019
Bloque lateral de acero inoxidable (Stainless Steel Side Block) - [Low Resolution]
Tuesday, July 30, 2019
Conjunto de anillos del cuello, collar de sujeción y separadores frontales (Neck Ring Assembly, Locking Collar and Front Stand Offs) - [Low Resolution]
Tuesday, July 30, 2019
Derechos de propiedad intelectual (Copyright) - [Low Resolution]
Tuesday, July 30, 2019
Conjunto de vaciado de agua del casco SL 27® (SL 27® Water Dump) - [Low Resolution]
Tuesday, July 30, 2019
Descripción y especificaciones de uso (Description and Operational Specifications) - [Low Resolution]
Tuesday, July 30, 2019
Contrapesos (Weights) - [Low Resolution]
Tuesday, July 30, 2019
Funda de agua caliente (Hot Water Shroud) - [Low Resolution]
Tuesday, July 30, 2019
Correa para el mentón, pasadores fiadores sellados y traba de los cascos de fibra de vidrio (Chin Strap, Sealed Pull Pins and Swing Catch for Fiberglass Helmets) - [Low Resolution]
Tuesday, July 30, 2019
Inspección y mantenimiento (Inspection and Maintenance) - [Low Resolution]
Tuesday, July 30, 2019
Lengüetas con broche de presión, correa para el mentón, traba y pasadores fiadores sellados de los cascos de acero inoxidable (Snap Tabs, Chin Strap, Swing Catch, Sealed Pull Pins Stainless Steel) - [Low Resolution]
Tuesday, July 30, 2019
Mantenimiento preventivo general (General Preventative Maintenance) - [Low Resolution]
Tuesday, July 30, 2019
Información general sobre los productos KMDSI (General Information KMDSI Products) - [Low Resolution]
Tuesday, July 30, 2019
Regulador compensado 455 (455 Balanced Regulator) - [Low Resolution]
Tuesday, July 30, 2019
Máscara buconasal (Oral Nasal Mask (350/450/455) - [Low Resolution]
Tuesday, July 30, 2019
SuperLite® 17B Neck Clamp Area - [Low Resolution]
Tuesday, February 27, 2018
  1. Removed references to specific torque specs, updated the appearance of the ANSI signal blocks and updated the BlowApart diagram.
Thursday, May 3, 2018
  1. Updated layout.
Monday, August 5, 2019
  1. Added note about safety pin to 1.1 SuperLite® 17B Latch Catch Assembly, Pull Pin and updated some verbiage. Added note about internal chin strap to 1.4 SL 17B Chin Strap and Yoke Strap and updated some verbiage. Updated title of 1.4.1 Chin Strap Removal to 1.4.1 Chin Strap Replacement. Updated 1.4.2 Chin Strap Replacement to 1.4.2 Chin Strap Installation.
KMB 18 BlowApart - [Low Resolution]
Wednesday, April 6, 2016
  1. Updated the KMB hood assembly, earphones, microphone and communications set part numbers and added in the face seal.
Tuesday, June 20, 2017
  1. Created modular BlowApart and separated the KMB 18 and 28 into separate BlowAparts.
Friday, August 24, 2018
  1. Updated layout.
KMB 28 BlowApart - [Low Resolution]
Tuesday, June 20, 2017
  1. Created modular BlowApart and separated the KMB 18 and 28 into separate BlowAparts.
Friday, September 7, 2018
  1. Updated layout.
Plastic Non-Adjustable Second Stage SCUBA Regulator (Octopus) BlowApart - [Low Resolution]
Wednesday, September 20, 2017
  1. Switched the spring to the opposite side of the inlet valve. Updated the part number for the O-ring that's installed on the scuba inlet nipple.
Friday, September 7, 2018
  1. Updated layout.
SL 17B BlowApart - [Low Resolution]
Friday, May 13, 2016
  1. Updated earphones, microphone and communications set.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
Tuesday, June 20, 2017
  1. Created modular BlowApart.
Wednesday, November 1, 2017
  1. Corrected the head cushion, head cushion bag and helmet shell part numbers
Thursday, December 28, 2017
  1. Corrected the Regulator Mount Nut from P/N 550-081 to P/N 550-038.
Wednesday, August 22, 2018
  1. Updated layout.
Friday, September 7, 2018
  1. Removed the 545-024, which had the correct part number and description for 510-033, and replaced with 510-033.
KMACS-5 BlowApart - Low Resolution
Tuesday, June 16, 2015
  1. Added italicized notes on communicator panel page.
Wednesday, May 4, 2016
  1. Updated the communicator.
Thursday, May 12, 2016
  1. Corrected communications wire direction.
Monday, March 13, 2017
  1. Current location #s 61 and 62 (445-115 Door and 420-160 Slide Latch) were switched.
Tuesday, February 13, 2018
  1. Added Must order P/N 425-110 (qty. 2 valves) to P/N 455-157.
Thursday, May 10, 2018
  1. Corrected the orientation of the 455-049 Check Valve, L.P.
Friday, September 7, 2018
  1. Updated layout.
Side Block BlowApart - [Low Resolution]
Friday, August 24, 2018
  1. Updated layout.
Switchover Regulator BlowApart - [Low Resolution]
Tuesday, October 17, 2017
  1. Updated appearance and layout of the switchover regulator.
Friday, February 16, 2018
  1. Added the P/N 220-078 Cap, Threaded, Hose Inlet and 410-151 O-ring.
Friday, September 7, 2018
  1. Updated layout.
SuperFlow® First Stage Regulator BlowApart 305-161 - [Low Resolution]
Thursday, June 14, 2018
  1. Location number 6 and 7, 310-115 and 510-011, part numbers were switched. Corrected material colors for 350-120, seat. Corrected appearance and color of the 310-023.
Friday, September 7, 2018
  1. Update layout.
Stainless Steel Locking Collar BlowApart - [Low Resolution]
Friday, August 24, 2018
  1. No Changelog Available for BlowAparts.
REX Regulator BlowApart - [Low Resolution]
Friday, August 24, 2018
  1. Updated layout.
505-008 SL 17A/B Neck Clamp/Yoke Assembly BlowApart - [Low Resolution]
Friday, August 24, 2018
  1. Updated layout.
SL 17C and 27 Neck Ring Assemblies BlowApart - [Low Resolution]
Friday, August 24, 2018
  1. No Changelog Available for BlowAparts.
Balanced Scuba Regulator BlowApart 200-120 - [Low Resolution]
Tuesday, January 3, 2017
  1. Added note that the flow sleeve is not a removable part.
Tuesday, November 28, 2017
  1. Updated the material color of the balance spacer and P/N 250-065 washer.
Friday, September 7, 2018
  1. Updated layout.
M-48 SuperMask BlowApart - Low Resolution
Thursday, April 13, 2017
  1. Removed 805-030 Harness, non-stretch (obsolete) and "*Indicates parts for general sale."
Friday, September 7, 2018
  1. Updated layout.
M-48 Mod-1 BlowApart - Low Resolution
Thursday, December 17, 2015
  1. Updated throughout, including the updated mask skirt.
Friday, September 7, 2018
  1. Updated layout.
Manifold Block BlowApart - Low Resolution
Thursday, August 27, 2015
  1. Removed the overpressure relief valve from the manifold block.
Friday, September 7, 2018
  1. Updated layout.
Plastic Second Stage SCUBA Regulator Blowapart - [Low Resolution]
Wednesday, September 20, 2017
  1. Switched the spring to the opposite side of the inlet valve. Updated the part number for the O-ring that's installed on the scuba inlet nipple.
Friday, September 7, 2018
  1. Updated layout.
Scuba Pod Assembly w/ Tilt-to- Purge 805-015 BlowApart - Low Resolution
Thursday, January 7, 2016
  1. Purchasable parts, added the P/N 520-039 Tie Wrap and added the 805-026 BlowApart.
Friday, January 29, 2016
  1. Added the Air Inlet Swivel P/N 305-017.
Wednesday, April 6, 2016
  1. Corrected location numbers.
Wednesday, July 6, 2016
  1. Updated the description for the P/N 820-126 Hinge Mount, Pod Lock
Thursday, August 24, 2017
  1. Removed pinch to purge and replaced with tilt to purge.
Friday, September 7, 2018
  1. Updated layout.
Metal Second Stage SCUBA Regulator Blowapart - [Low Resolution]
Friday, September 7, 2018
  1. Updated layout.
EXO Standard and Original BlowApart - [Low Resolution]
  1. No changelog available for BlowAparts.
KM 37 BlowApart - [Low Resolution]
Tuesday, November 8, 2016
  1. Added the front stand offs and accompanying screw as separate part numbers, rather than the 525-116 kit.
Wednesday, November 23, 2016
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
Thursday, August 16, 2018
  1. Updated layout. Corrected front stand off part number from 540-059 to 540-039.
SL 17C Blowapart - [Low Resolution]
Friday, May 13, 2016
  1. Updated earphones, microphone and communications set.
Tuesday, November 8, 2016
  1. Added the front stand offs and accompanying screw as separate part numbers, rather than the 525-116 kit.
Wednesday, November 23, 2016
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
Wednesday, August 22, 2018
  1. Updated layout.
KM 57 BlowApart - [Low Resolution]
Friday, March 3, 2017
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
Wednesday, August 22, 2018
  1. Updated layout.
Scuba POD w/Balanced Purge Tube 805-026 BlowApart - Low Resolution
Wednesday, July 6, 2016
  1. Updated the description for the P/N 820-126 Hinge Mount, Pod Lock
Friday, September 7, 2018
  1. Updated layout.
KM 47 Blowapart - [Low Resolution]
Tuesday, November 8, 2016
  1. Added the front stand offs and accompanying screw as separate part numbers, rather than the 525-116 kit.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly, added note that the nose block device includes the nose block pad and created modular BlowAparts.
Thursday, March 8, 2018
  1. Corrected the bent tube assembly w/O-rings part number from 555-155 to 555-168
Thursday, August 16, 2018
  1. Updated layout. Corrected front stand off part number from 540-059 to 540-039.
Friday, March 8, 2019
  1. Updated the description of the 555-167 to 47/77 Bent Tube.
SuperFlow® 350 BlowApart - [Low Resolution]
Friday, November 3, 2017
  1. Updated material coloring.
Tuesday, May 22, 2018
  1. Removed P/N 550-076 inlet valve.
Friday, August 24, 2018
  1. Updated layout.
Thursday, December 20, 2018
  1. Moved clamp and screw outside of cover assembly.
SL 27® Blowapart - [Low Resolution]
Friday, July 8, 2016
  1. Relocated a few location bubbles and fasteners parts associated with the earphone retainer and eliminated the 530-547 washer from the neck pad, as it's included with the neck pad.
Tuesday, November 8, 2016
  1. Added the front stand offs and accompanying screw as separate part numbers, rather than the 525-116 kit.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and separated the nose block pad from the nose block device.
Tuesday, June 20, 2017
  1. Created modular BlowApart.
Friday, April 13, 2018
  1. Corrected part numbers 510-760 to 510-759 and 505-730 to 505-729 and their associated descriptions.
Wednesday, May 30, 2018
  1. Updated the appearance of the 510-759 SL 27 Tri Valve exhaust main body.
Thursday, August 16, 2018
  1. Updated layout. Corrected front stand off part number from 540-059 to 540-039 and corrected spelling of "Deflector" from "Defector."
Friday, November 16, 2018
  1. Corrected part number and description of the nose block to 545-070.
SuperFlow® 450 Regulator BlowApart - [Low Resolution]
Monday, January 23, 2017
  1. Updated internal components.
Friday, August 24, 2018
  1. Updated layout.
Thursday, September 27, 2018
  1. Updated material color of the valve seat, balanced spacer and transfer pin.
Neck Ring Assemblies BlowApart - [Low Resolution]
Friday, August 24, 2018
  1. Updated layout.
Wednesday, October 31, 2018
  1. Fixed the material on the neck dam, it was reversed.
SuperFlow® Regulator BlowApart - [Low Resolution]
Friday, August 24, 2018
  1. Updated layout.
Thursday, December 20, 2018
  1. Moved clamp and screw outside of cover assembly.
[OLD] Communication Assemblies BlowApart - [Low Resolution]
Thursday, August 10, 2017
  1. Added the microphone assembly into the BlowApart.
Friday, August 24, 2018
  1. Updated layout.
Thursday, May 2, 2019
  1. Appended the title of the communications wit, "Old."
Rebreather Pod BlowApart 805-080 - [Low Resolution]
Friday, February 16, 2018
  1. Added the P/N 810-027 mouthpiece, P/N 820-009 cap and combined like parts.
Friday, September 7, 2018
  1. Updated layout.
Thursday, September 20, 2018
  1. Updated material color of the 810-110 O-ring, moved the 810-126 and 820-157.
Friday, November 30, 2018
  1. Removed the P/N 810-027 Mouthpiece.
Thursday, March 21, 2019
  1. Updated the material color to brass on the 830-040 screw.
Copyright - [Low Resolution]
Friday, March 3, 2017
  1. Replaced raw text file with a PDF file.
17B Handle and Weights - [Low Resolution]
Thursday, May 3, 2018
  1. Updated layout and diagram.
Accessories - [Low Resolution]
Thursday, May 3, 2018
  1. Updated layout.
17C Handle and Side Weight - [Low Resolution]
Thursday, May 14, 2015
  1. Updated with front stand offs.
Thursday, May 3, 2018
  1. Updated layout and diagram.
17B Head Cushion - [Low Resolution]
Thursday, May 3, 2018
  1. Updated layout.
BandMask Hood, Face Seal, Band Keepers and Head Harness - [Low Resolution]
Friday, September 8, 2017
  1. Added the Band Mask hood and molded face seal replacement and replacing a molded face seal sections. Added the updated hood and molded face seal sizing guide.
Thursday, May 3, 2018
  1. Updated layout.
Oral Nasal Mask (350/450/455) - [Low Resolution]
Thursday, May 3, 2018
  1. Updated layout and diagram.
Bent Tube - [Low Resolution]
Friday, September 12, 2014
  1. Added bent tube procedures for the REX regulator.
Monday, March 2, 2015
  1. Updated with front stand offs.
Tuesday, June 27, 2017
  1. Divided the module into three main sections based on regulator and updated the procedures.
Thursday, May 3, 2018
  1. Updated the layout and cross references due to splitting the INTRO module into four separate modules.
Handle on Fiberglass Helmets - [Low Resolution]
Friday, February 27, 2015
  1. Updated with front stand offs.
Thursday, May 3, 2018
  1. Updated layout.
Hot Water Shroud - [Low Resolution]
Thursday, May 3, 2018
  1. Updated layout and removed references to specific torque specs.
Brass/Chromed Brass Side Block - [Low Resolution]
Monday, May 4, 2015
  1. Updated with front stand offs.
Friday, September 15, 2017
  1. Added free flow section.
Friday, December 29, 2017
  1. Added Air Train, Applying RTV Silicone KMB 28 section.
Thursday, May 3, 2018
  1. Updated the layout and cross references due to splitting the INTRO module into four separate modules.
Overpressure Relief Valve - [Low Resolution]
Thursday, May 3, 2018
  1. Updated layout and diagram.
Inspection and Maintenance - [Low Resolution]
Thursday, May 3, 2018
  1. Split introduction module into four separate modules.
Handle on Stainless Steel Helmets - [Low Resolution]
Tuesday, March 3, 2015
  1. Updated with auxiliary port and front standoffs.
Friday, May 4, 2018
  1. Updated layout.
Weights - [Low Resolution]
Friday, May 4, 2018
  1. Updated layout.
Neck Ring Assembly, Locking Collar and Front Stand Offs - [Low Resolution]
Friday, August 12, 2016
  1. Added the front stand offs.
Thursday, May 3, 2018
  1. Updated layout.
Wednesday, October 31, 2018
  1. Fixed the material on the neck dam, it was reversed.
Head Cushion, Head Cushion Foam Spacer (HCFS) and Chin Cushion - [Low Resolution]
Friday, May 8, 2015
  1. Updated with auxiliary port and front stand offs.
Friday, April 14, 2017
  1. Updated entire module throughout, including new procedures for head cushion stuffing along with new images to accompany.
Thursday, May 3, 2018
  1. Updated layout.
Face Port, Port Retainer and Nose Block - [Low Resolution]
Friday, August 8, 2014
  1. Updated Loctite® use for stainless steel helmets only in section 1.1.4 Face Port and Port Retainer Replacement, step 5.
Friday, February 27, 2015
  1. Updated with front stand offs.
Thursday, May 3, 2018
  1. Update title, layout and diagram.
Tuesday, February 19, 2019
  1. Removed the neoprene cement warning from section 1.2.1 Nose Block Assembly Removal.
Communications on SuperLite® 17B and 17C Helmets, KMB 18 and 28 BandMasks® - [Low Resolution]
Tuesday, May 12, 2015
  1. Updated wiring diagram.
Thursday, May 3, 2018
  1. Updated layout and diagrams.
Friday, January 18, 2019
  1. Added the earphone replacement section.
Tuesday, February 19, 2019
  1. Corrected eye and hand protection icons in caution block, eye protection icon was incorrect and the hand protection icon was missing.
General Preventative Maintenance - [Low Resolution]
Thursday, May 3, 2018
  1. Split introduction module into four separate modules.
Tuesday, March 12, 2019
  1. Changed, "Do not use aerosol spray or lubricants." in section 1.2.2 to, "Do not use aerosol spray or lubricants on plastic parts." Removed duplicate sentence, "This can cause the port to fail unexpectedly and drowning could result" in warning in section 1.2.5 Thread Locker.
SL 27® Water Dump - [Low Resolution]
Monday, March 2, 2015
  1. Updated with front stand offs.
Friday, May 4, 2018
  1. Updated layout.
Wednesday, March 20, 2019
  1. Corrected the description of the, "Purge Valve Body" from "Water dump body" in the diagram on page 2. Removed the last word, "Quickly" from the, "If the valve body is oriented improperly, the valve will not be able to dump water" sentence in section 1.1.5 Water Dump Valve Body Removal.
One Way Valve - [Low Resolution]
Wednesday, March 15, 2017
  1. Updated the diagram of the one way valve exploded view.
Monday, June 19, 2017
  1. Corrected the orientation of the adapter in the BlowApart image.
Thursday, May 3, 2018
  1. Updated layout.
Monday, June 11, 2018
  1. Added one way valve check sections.
Friday, March 8, 2019
  1. Updated text in step three of section 1.1.2 Reassembly of the One Way Valve to reflect correct order that the wiper and O-ring goes on.
Snap Tabs, Chin Strap, Swing Catch, Sealed Pull Pins Stainless Steel - [Low Resolution]
Monday, April 27, 2015
  1. Updated with auxiliary port and front stand offs.
Wednesday, November 8, 2017
  1. Added the pull pin overhaul and pull pin sleeve sections.
Friday, May 4, 2018
  1. Updated layout, diagrams and removed references to specific torque specs.
Thursday, April 11, 2019
  1. Updated step 6 in section 1.3.3.3 Reassembly and Filling from, "hole end down" to, "hole end up" and updated the bulletin year in section 1.3 Sealed Pull Pins from 2012 to 2013.
Stainless Steel Side Block - [Low Resolution]
Monday, May 4, 2015
  1. Updated with auxiliary port and front stand offs.
Friday, May 4, 2018
  1. Updated layout, diagrams and removed references to specific torque specs.
Friday, April 5, 2019
  1. Updated diagram on page 7, 10 and 12 with correct call-outs for the washer, O-ring and O-ring EGS valve and the defogger or “steady or free-flow” valve.
Chin Strap, Sealed Pull Pins and Swing Catch for Fiberglass Helmets - [Low Resolution]
Tuesday, September 22, 2015
  1. Updated the verbiage throughout, including to service sealed pull pins annually.
Wednesday, November 8, 2017
  1. Added the pull pin overhaul and pull pin sleeve sections.
Thursday, May 3, 2018
  1. Updated layout.
Description and Operational Specifications - [Low Resolution]
Thursday, May 3, 2018
  1. Split introduction module into four separate modules.
Monday, April 8, 2019
  1. Updated CE info from Directive 89/686/EEC to Regulation (EU) 2016/425. Removed the SuperFlow regulator diagram. Added in serial number locations.
Wednesday, May 8, 2019
  1. Updated to include the 525-761 water shroud kit for the KM 97 in sections 1.4.3 Minimum Operating Temperature and 1.9.2 Hot Water Shroud (P/N 525-100) and Water Shroud (P/N 525-761). Corrected the Kirby Morgan phone number area code from (850) to (805) in section 1.3 Product Specifications and 1.6 Operational Specifications & Limitations. Updated the description of the water dump body from main exhaust body on page 10 in section 1.7 Helmet Features. Removed the sentence, "Unlike other Kirby Morgan helmets, no external restrictor is required" as this pertains to older A side blocks. Updated the amount of tools from four to five in 1.9.3 Special Regulator Tools for the SuperFlow® and the SuperFlow® 350 and added the regulator mount nut socket wrench.
General Information KMDSI Products - [Low Resolution]
Thursday, May 21, 2015
  1. Updated with current configurations of the MOD-1 and SuperMask and updated photos throughout module.
Tuesday, August 18, 2015
  1. Updated with current configurations of the MOD-1 and SuperMask and updated photos throughout module.
Friday, October 14, 2016
  1. Updated CE information and EXO product photo.
Monday, October 24, 2016
  1. Updated CE information.
Tuesday, January 31, 2017
  1. Added front cover page.
Tuesday, April 18, 2017
  1. Added serial number and CE diagrams for the SuperFlow, SuperFlow 350 and 455 regulators. Updated the packaging procedures for Band Masks.
Friday, September 15, 2017
  1. Added free flow section.
Thursday, May 3, 2018
  1. Split introduction module into four separate modules.
Monday, April 1, 2019
  1. Removed CE certification from the SL 17B, KM 47 and 77 helmets.
Thursday, May 23, 2019
  1. Corrected the URL for the M-48 SuperMask in section 1.1 Introduction on page 9
Quad Valve and Tri-Valve® Exhaust - [Low Resolution]
Monday, March 2, 2015
  1. Updated with front stand offs.
Tuesday, September 6, 2016
  1. Updated with correct parting line assembly instructions.
Friday, March 23, 2018
  1. Updated Quad Valve Exhaust Valve Replacement section, diagrams and layout.
Friday, April 5, 2019
  1. Changed step 8 in 1.1.3 Quad Valve Exhaust Valve Replacement to:
  2. Place whisker clamps around the grooves in each of the two whiskers. Before doing the final tightening of the whisker clamps, make sure that the parting line on the bottom of the wings is lined up with the parting line on the main body. For the SL 27 helmet ONLY, make sure that the parting line on the bottom of the whisker wings is 5/16” behind the parting line on the main body.
  3. Changed the caption in step 8 in 1.1.3 Quad Valve Exhaust Valve Replacement to:
  4. The port and starboard whiskers should align with the whisker covering the main body so that the parting lines are in alignment (except in the SL 27 helmet, where the parting lines on the bottom of the whiskers should be 5/16" behind the mold line on the main body). You can also make marks on the whiskers with a felt tip pen.
Tuesday, June 25, 2019
  1. Updated the material of the 510-776 exhaust valve.
455 Balanced Regulator - [Low Resolution]
Tuesday, June 3, 2014
  1. Added explanation regarding the two LP plugs in the 455 regulator body.
  2. Various grammatical corrections.
Friday, December 9, 2016
  1. Updated wrench size from 1" to 15/16" in step six in 1.1.5 455 Balanced Regulator Bias Adjustment Field Service with Demand Regulator on Helmet.
Friday, May 4, 2018
  1. Updated the layout and cross references due to splitting the INTRO module into four separate modules.
Wednesday, December 5, 2018
  1. Updated step 26 in section 1.3 455 Balanced Regulator Bias Adjustment Field Service with Demand Regulator on Helmet.
Friday, April 5, 2019
  1. Updated references to 1.3.1 Removal of the Bent Tube Assembly on pages 5 and 13, which is the correct regulator model.
Tuesday, June 25, 2019
  1. Updated the material of the 510-776 exhaust valve.
BandMask Tri-Valve Exhaust - [Low Resolution]
Tuesday, September 6, 2016
  1. Updated with correct parting line assembly instructions.
Thursday, May 3, 2018
  1. Corrected title from, "Band Mask" to "BandMask." Updated layout and diagrams.
Friday, April 5, 2019
  1. Removed extra call-out to the kidney plate in the diagram on page 4.
Tuesday, June 25, 2019
  1. Updated the material of the 510-776 exhaust valve.
REX Regulator and Oral Nasal - [Low Resolution]
Friday, February 27, 2015
  1. Updated with front stand offs and auxiliary port.
Thursday, May 3, 2018
  1. Updated layout.
Friday, April 5, 2019
  1. Changed step 6 in 1.2.5 Post Dive Reassembly to:
  2. Place tie-wraps around the tie wrap grooves in each of the two whiskers. Before doing the final tightening of the tie wraps make sure that the parting line on the bottom of the wings is lined up with the parting line on the main body, and the heads of the tie wraps are positioned on the back of the body.
  3. Changed caption on page 10 to:
  4. The port and starboard whiskers should align so that the parting line on the bottoms of the wings is lined up with the parting line on the main body, and the heads of the tie wraps are positioned on the back of the body. You can also make marks on the whiskers with a felt tip pen.
  5. Changed 1.2.1 to: Tighten the retaining ring until snug. The lip of the main whisker body should completely cover the retaining ring, holding it in place.
  6. Removed reference to specific torque specification in step 7 of 1.4 REX® Regulator Re-Assembly
  7. Changed spacer tube to sleeve in step 9 of 1.4 REX® Regulator Re-Assembly.
  8. Changed jam nut to adjustment lock nut throughout module.
  9. Changed step 23 in 1.4 REX® Regulator Re-Assembly to:
  10. Place tie-wraps around the tie wrap grooves in each of the two whiskers. Before doing the final tightening of the tie-wraps, make sure that the parting line on the bottom of the wings is lined up with the parting line on the main body, and the heads of the tie wraps are positioned on the back of the body.
Tuesday, June 25, 2019
  1. Updated the material of the 510-776 exhaust valve.
SuperFlow® 350 Regulator - [Low Resolution]
Monday, March 2, 2015
  1. Updated with front stand offs.
Friday, May 4, 2018
  1. Updated the layout, diagrams and cross references due to splitting the INTRO module into four separate modules.
Tuesday, March 12, 2019
  1. Updated, "The SuperFlow® 350 regulator assembly" diagram to reflect the correct order of the clamp.
Friday, April 5, 2019
  1. Changed step 5 in 1.1.3 Post Dive Reassembly to:
  2. Place whisker clamps around the grooves in each of the two whiskers. Before doing the final tightening of the whisker clamps, make sure that the parting line on the bottom of the wings is lined up with the parting line on the main body. For the SL 27 helmet ONLY, make sure that the parting line on the bottom of the whisker wings is 5/16" behind the parting line on the main body.
  3. Changed step 21 in 1.7 Reassembly of the SuperFlow® 350 Demand Regulator to:
  4. Place whisker clamps around the grooves on each of the two whiskers. Before doing the final tightening of the whisker clamps, make sure that the parting line on the bottom of the wings is lined up with the parting line on the main body. For the SL 27 helmet ONLY, make sure that the parting line on the bottom of the whisker wings is 5/16" behind the parting line on the main body.
  5. Changed the caption in step 24 1.7 Reassembly of the SuperFlow® 350 Demand Regulator to:
  6. The port and starboard whiskers should align with the whisker covering the main body so that the parting lines are in alignment (except in the SL 27 helmet, where the parting lines on the bottom of the whiskers should be 5/16" behind the mold line on the main body). You can also make marks on the whiskers with a felt tip pen.
Tuesday, June 25, 2019
  1. Updated the material of the 510-776 exhaust valve.
Stainless Steel Helmets with SuperFlow® 350 or 455 Balanced Regulator Pod - [Low Resolution]
Monday, March 2, 2015
  1. Updated with auxiliary port and front stand offs.
Monday, August 1, 2016
  1. Updated module throughout.
Thursday, May 3, 2018
  1. Changed title to correct 455 product name and layout.
Friday, March 15, 2019
  1. Changed the note on page one in section 1.1.1 Pod System and Regulator Removal from, "Outside of the helmet shell" to "Inside of the helmet shell."
Tuesday, May 7, 2019
  1. Changed the note on page one in section 1.1.1 Pod System and Regulator Removal from, "…while others are on the inside" to "…while others are on the outside." Updated the caption for the image depicting the different screws in section 1.2 Reinstalling the Pod on the Helmet.
Tuesday, June 25, 2019
  1. Updated the material of the 510-776 exhaust valve.
SuperFlow® 450 Regulator - [Low Resolution]
Tuesday, January 19, 2016
  1. No changelog available for manuals.
Friday, May 4, 2018
  1. Updated the layout, diagrams and cross references due to splitting the INTRO module into four separate modules.
Thursday, September 27, 2018
  1. Updated the Exploded view of SuperFlow® 450 regulator diagram, Close-up detail of the inlet valve diagram, Inserting the inlet valve into the main tube image, Details of the SuperFlow® 450 main tube and associated parts diagram, SuperFlow® 450 flex knob assembly diagram and SuperFlow® 450 exhaust valve mechanism diagram.
Friday, April 5, 2019
  1. Changed note in 1.1.1 General to remove plural springs and replace with singular spring.
Tuesday, June 25, 2019
  1. Updated the material of the 510-776 exhaust valve.
Stainless Steel Helmets with REX Pod - [Low Resolution]
Friday, February 27, 2015
  1. Updated with front stand offs and auxiliary port.
Tuesday, August 2, 2016
  1. Updated module throughout.
Thursday, May 3, 2018
  1. Updated layout.
Friday, March 15, 2019
  1. Changed the note on page one in section 1.1.1 REX® Pod System and Regulator Removal from, "Outside of the helmet shell" to "Inside of the helmet shell."
Tuesday, May 7, 2019
  1. Changed the note on page one in section 1.1.1 Pod System and Regulator Removal from, "…while others are on the inside" to "…while others are on the outside." Updated the caption for the image depicting the different screws in section 1.2 Reinstalling the Pod on the Helmet.
Tuesday, June 25, 2019
  1. Updated the material of the 510-776 exhaust valve.
SuperFlow® Regulator - [Low Resolution]
Wednesday, March 18, 2015
  1. No changelog available for manuals.
Friday, May 4, 2018
  1. Updated layout, diagrams and removed references to specific torque specs.
Tuesday, June 25, 2019
  1. Updated the material of the 510-776 exhaust valve.
M-48 Mod-1 User Guide - Low Resolution
Thursday, December 17, 2015
  1. Updated throughout, including the updated mask skirt.
,
Thursday, May 5, 2016
  1. Updated content throughout user guide.
,
Friday, May 13, 2016
  1. Removed and updated content
,
Thursday, September 8, 2016
  1. Updated the checklists.
,
Friday, October 14, 2016
  1. Updated with CE information.
,
Monday, October 17, 2016
  1. Updated with CE information.
,
Wednesday, November 8, 2017
  1. Updated the P/N 805-015 Scuba Pod BlowApart.
,
Tuesday, January 2, 2018
  1. Updated the pagination and table of contents flow issue.
,
Tuesday, May 15, 2018
  1. Added, "Secure using KMDSI tie wrap P/N 520-038" to section, "Communications with the M-48 MOD-1."
,
Friday, March 29, 2019
  1. Updated CE info from Directive 89/686/EEC to Regulation (EU) 2016/425, updated 805-175 M-48 MOD-1 and 805-015 Scuba Pod BlowApart
,
Friday, May 3, 2019
  1. Removed SCUBAspec.com, seavisionusa.com and sporteyes.com as prescription lens providers. Updated the Conservation and Storage section.
M-48 SuperMask - Low Resolution
Thursday, October 15, 2015
  1. Updated with CE information.
,
Friday, June 24, 2016
  1. Updated content throughout user guide.
,
Thursday, September 8, 2016
  1. Updated the checklists.
,
Friday, October 14, 2016
  1. Updated with CE information.
,
Monday, October 17, 2016
  1. Updated with CE information.
,
Friday, February 10, 2017
  1. Removed reference to serial number location.
,
Wednesday, November 8, 2017
  1. Updated the P/N 805-015 Scuba Pod BlowApart.
,
Tuesday, May 15, 2018
  1. Removed duplicate section, "Communications with the M-48 SuperMask®" and added, "Secure using KMDSI tie wrap P/N 520-038" to section of same name.
,
Friday, March 29, 2019
  1. Updated CE info from Directive 89/686/EEC to Regulation (EU) 2016/425, updated 805-010/805-010C M-48 SuperMask and 805-015 Scuba Pod BlowApart.
,
Friday, May 3, 2019
  1. Removed SCUBAspec.com, seavisionusa.com and sporteyes.com as prescription lens providers. Updated the Conservation and Storage section.
100-141 User Guide - Low Resolution
Thursday, October 15, 2015
  1. Updated CE information.
,
Tuesday, January 3, 2017
  1. Added note that the flow sleeve is not a removable part.
,
Monday, August 7, 2017
  1. Removed section "Using the balanced second stage regulator with the Kirby Morgan M-48 SuperMask and M-48 Mod-1" and replaced with "Balance Purge Tube and Regulator Installation" section.
,
Tuesday, August 15, 2017
  1. Updated CE verbiage
,
Friday, March 29, 2019
  1. Updated CE info from Directive 89/686/EEC to Regulation (EU) 2016/425, removed SuperFlow First Stage Regulator BlowApart, updated 200-120 Balanced SCUBA Regulator Assembly BlowApart.
100-133 User Guide - Low Resolution
Thursday, October 15, 2015
  1. Updated CE information.
,
Monday, October 17, 2016
  1. Updated CE information.
,
Tuesday, August 15, 2017
  1. Updated CE Verbiage.
,
Wednesday, June 20, 2018
  1. Corrected BlowApart location number 6 and 7, 310-115 and 510-011, part numbers were switched. Corrected material colors for 350-120, seat. Corrected appearance and color of the 310-023.
,
Monday, March 25, 2019
  1. Updated CE info from Directive 89/686/EEC to Regulation (EU) 2016/425.
100-813 User Guide - Low Resolution
Tuesday, March 13, 2018
  1. Updated the Rebreather Pod and Switchover Regulator BlowAparts in the back of the user guide and removed references to BlowApart locations within the text.
,
Thursday, October 4, 2018
  1. Update layout and BlowApart.
,
Friday, November 30, 2018
  1. Update BlowApart.
100-134 User Guide - Low Resolution
Tuesday, February 21, 2017
  1. Added extra pages, including a second maintenance record page, for printing pagination purposes.
,
Monday, June 19, 2017
  1. Corrected the orientation of the adapter in the BlowApart image.
,
Tuesday, September 25, 2018
  1. Updated layout, removed "Diver's" from title and removed the SuperFlow First Stage Regulator BlowApart
100-820 User Guide - Low Resolution
Friday, December 29, 2017
  1. Updated the BlowApart of the switchover regulator.
,
Tuesday, March 13, 2018
  1. Updated the BlowApart of the switchover regulator.
100-401 User Guide - Low Resolution
Thursday, June 9, 2016
  1. No Changelogs Available for User Guide.
100-120 User Guide - Low Resolution
Monday, April 25, 2016
  1. Removed CE certification.
,
Thursday, October 20, 2016
  1. Added clarification about CE status.
,
Tuesday, August 15, 2017
  1. Updated CE Verbiage.
,
Friday, December 8, 2017
  1. Updated the plastic adjustable second stage scuba regulator P/N 305-166 and plastic non-adjustable second stage scuba regulator (octopus) Part # 305-171 BlowApart.
100-131 User Guide - Low Resolution
Thursday, January 26, 2017
  1. Updated content throughout.
,
Friday, May 19, 2017
  1. Fixed pagination issue.