Home > Products > Regulators > Helmet & Mask Regulators > SuperFlow Regulator

SuperFlow Regulator

Body: 

SuperFlow Reg Top Tab

SuperFlow®Regulator

The SuperFlow® B regulator became the bench mark in surface supplied demand regulators more than 40 years ago and remains one of the most popular and widely used Helmet and BandMask® regulators in the world.

The simple chrome plated all brass regulator is of a non- balanced, pneumatically assisted design that features a wide range, multi turn, diver controlled bias adjustment which allows use with all umbilical supply systems.

The SuperFlow® B regulator is recommended for all around air and mixed gas diving where light to heavy work is the norm.

Part Number 525-773

  • SuperFlow Regulator

superflow_reg_tabber

Manual Low Resolution
AttachmentSize
SuperFlow® Regulator1.34 MB
Manual Low Resolution
AttachmentSize
Copyright414.2 KB
Manual High Resolution
AttachmentSize
SuperFlow® Regulator6.35 MB
Manual High Resolution
AttachmentSize
Copyright34.49 KB
Blowaparts Low Resolution
Blowaparts High Resolution
Manual Low Resolution
AttachmentSize
Derechos de propiedad intelectual39.98 KB
Manual High Resolution
AttachmentSize
Derechos de propiedad intelectual40.11 KB
Manual High Resolution
AttachmentSize
Regulador SuperFlow®7.62 MB
Manual Low Resolution
AttachmentSize
Regulador SuperFlow®1.94 MB
SuperFlow® 350 BlowApart - [Low Resolution]
Friday, November 3, 2017
  1. Updated material coloring.
Tuesday, May 22, 2018
  1. Removed P/N 550-076 inlet valve.
Friday, August 24, 2018
  1. Updated layout.
Thursday, December 20, 2018
  1. Moved clamp and screw outside of cover assembly.
Copyright - [Low Resolution]
Friday, March 3, 2017
  1. Replaced raw text file with a PDF file.
Derechos de propiedad intelectual (Copyright) - [Low Resolution]
Tuesday, July 30, 2019
SuperFlow® 350 Regulator - [Low Resolution]
Monday, March 2, 2015
  1. Updated with front stand offs.
Friday, May 4, 2018
  1. Updated the layout, diagrams and cross references due to splitting the INTRO module into four separate modules.
Tuesday, March 12, 2019
  1. Updated, "The SuperFlow® 350 regulator assembly" diagram to reflect the correct order of the clamp.
Friday, April 5, 2019
  1. Changed step 5 in 1.1.3 Post Dive Reassembly to:
  2. Place whisker clamps around the grooves in each of the two whiskers. Before doing the final tightening of the whisker clamps, make sure that the parting line on the bottom of the wings is lined up with the parting line on the main body. For the SL 27 helmet ONLY, make sure that the parting line on the bottom of the whisker wings is 5/16" behind the parting line on the main body.
  3. Changed step 21 in 1.7 Reassembly of the SuperFlow® 350 Demand Regulator to:
  4. Place whisker clamps around the grooves on each of the two whiskers. Before doing the final tightening of the whisker clamps, make sure that the parting line on the bottom of the wings is lined up with the parting line on the main body. For the SL 27 helmet ONLY, make sure that the parting line on the bottom of the whisker wings is 5/16" behind the parting line on the main body.
  5. Changed the caption in step 24 1.7 Reassembly of the SuperFlow® 350 Demand Regulator to:
  6. The port and starboard whiskers should align with the whisker covering the main body so that the parting lines are in alignment (except in the SL 27 helmet, where the parting lines on the bottom of the whiskers should be 5/16" behind the mold line on the main body). You can also make marks on the whiskers with a felt tip pen.
Tuesday, June 25, 2019
  1. Updated the material of the 510-776 exhaust valve.
Regulador SuperFlow® 350 (SuperFlow® 350 Regulator) - [Low Resolution]
Tuesday, June 25, 2019
  1. Se actualizó el material de la válvula de escape 510-776.