Home > Products > Helmets > SuperLite 17B

SuperLite 17B

Body: 

SL17b Top Tab

Standard Drawstring Neck Dam

  • Neoprene (Medium)
  • (click image to enlarge)
Part No. Description Neck Size
510-533 Drawstring Neckdam
-This is a trim to fit Neck dam covering sizes small thru large
14"-17”
510-643 Drawstring Neckdam, Extra Large 17”-20"

Cold Water Neck Dam

  • Neoprene
  • (click image to enlarge)
Part No. Description Neck Size
510-652 Small 12"-15"
510-531 Medium 14"-17"
510-530 Large 16"-19"
510-653 X-Large 17"-20"

Pre '84 Neck Dam

  • Neoprene (Medium)
  • (click on image to enlarge)
Part No. Description Neck Size
510-649 Small 12"-15"
510-528 Medium 14"-17"
510-650 Large 16"-19"
510-651 X-Large 17"-20"

sl17b_tabber

  • Manual SL-17B
  • Logbook w/ pen
  • Over Pressure Relief Valve

    The Kirby Morgan® Overpressure Relief Valve is factory adjusted to vent any time the pressure in the low pressure hose connecting the bailout bottle to your emergency valve exceeds 200 P.S.I. It is installed in any of the low pressure ports in the first stage regulator.

  • SuperFlow First Stage, No Hose
  • Helmet/Mask Bag

    Measurements: 16’’ length x 12’’ width x 16’’ height. Made of high quality, tough black nylon, encasing a light weight, white polyethylene foam that features low water absorption and is fairly rigid (good impact strength). The two grommeted ventilation holes seen in the photo are on both sides of the bag. A large elastic topped pocket is on each side, for holding tool kits, checklists, logbooks, spares, etc. (There are no inside pockets). The bag handles are 1” wide straps of black polyester webbing. The bag closes up with two, large YKK zippers. We do not recommend the 500-901 helmet bag as a shipping container or packaging for your Kirby Morgan life support equipment!

  • Restrictor Adapter

    The 555-210 Restrictor Adapter should be used when an inflation hose is attached to the side block when drysuit diving. The main purpose of the Restrictor Adapter is to limit gas flow in the event the hose ruptures or is severed, and to ensure the loss of supply would not be great enough to significantly affect the diver’s breathing at moderate to heavy work rates. It also helps prevent filling the dry suit too rapidly.


    NOTE: O-ring 310-003 is required to install the Restrictor Adaptor onto the side block.