| Kirby Morgan

Communications

Communications are “non-modular” (like the SuperLite 17B helmet). When ordered with a male waterproof connector (for 4-wire communications), the mask will also include bare wire posts. When ordered with bare wire posts (for 2-wire communications), the port for the MWP connector is plugged.

Regulator Adjustment

Provides demand regulator adjustment for a wide range of incoming air pressure. In addition, it can serve as a steady flow valve. Some divers prefer a slight steady flow on surface supplied air when air consumption is not a factor.

Mask Seal

Comprises the main rubber body of the mask. It is a soft neoprene that seals comfortably on the diver's face. The EXOskeleton is used to hold this soft rubber seal in place on the diver's face for a solid seal.

Faceplate Lens

Tempered glass for strength and minimum fogging. A strong plastic frame surrounds the glass to seal on the rubber mask seal.

Head Harness

A pull through fixed buckle type with an automatic locking feature. Quick release buckles are featured on each rugged, double wide strap.

EXO Skeleton Frame

A strong injection molded plastic external frame gives the head harness an even pull completely around the mask seal. The EXOskeleton does not touch the diver's face. It is suspended just slightly off the face to hold the communication and breathing equipment in place without discomfort.