Split introduction module into four separate modules.
Updated CE info from Directive 89/686/EEC to Regulation (EU) 2016/425. Removed the SuperFlow regulator diagram. Added in serial number locations.
Updated to include the 525-761 water shroud kit for the KM 97 in sections 1.4.3 Minimum Operating Temperature and 1.9.2 Hot Water Shroud (P/N 525-100) and Water Shroud (P/N 525-761). Corrected the Kirby Morgan phone number area code from (850) to (805) in section 1.3 Product Specifications and 1.6 Operational Specifications & Limitations. Updated the description of the water dump body from main exhaust body on page 10 in section 1.7 Helmet Features. Removed the sentence, "Unlike other Kirby Morgan helmets, no external restrictor is required" as this pertains to older A side blocks. Updated the amount of tools from four to five in 1.9.3 Special Regulator Tools for the SuperFlow® and the SuperFlow® 350 and added the regulator mount nut socket wrench.
Added P/N 525-390 KM 37SS Water Shroud Kit and P/N 525-756 KM Diamond Water Shroud Kit to page DOS-6 1.4.3 Minimum Operating Temperature
Added section 1.6.2 Use of QD fittings on the Main Supply.
Changed psig and bar from 225 to 300 psig (15.5 to 30 bar) in the warning on page 8, section 1.6.1 Using a High-Pressure Breathing Gas Supply.
Removed section 1.1 CR Rating and updated the cross references to the torque specs due to the splitting of APNDX into three separate modules.
Added the KM Diamond and Surface Supplied MOD-1 to the CE certified products under section 1.1 CE Certification. Added the Km Diamond operating parameters diagram. Updated verbiage and diagrams in section 1.7.3 Gas Flow Systems. Added note icons throughout the module.
Rewrote and retitled section 1.3.4 Minimum Operating Temperature to 1.3.4 Minimum Operating Temperature Surface Supplied Air Diving. Updated section 1.3.1 SuperFlow® and SuperFlow® 350 Demand Regulators. Revised third paragraph in section 1.6 Helmet Features. Removed sentence, "The adjustment knob has a range of approximately 13 turns from full in to full out" and updated KM 47/77 bent tube warning in section 1.7.3 Gas Flow Systems. Updated 1.8.2 Hot Water Shroud Kit and Water Shroud Kits.
Updated layout.
Updated icons throughout. Updated diagram on page DOS-20. Updated image on page DOS-23.
