-
Products
Kirby Morgan offers a wide variety of spare parts kits, rebuild and upgrade kits, from the most basic O-ring kits and soft goods kits, all the way up to the largest “Overseas” Spares Kits which contain numerous spare parts and also include many of the smaller kits.
This is a complete list of Kirby Morgan® Regulators, from the time honored Superflow “B” regulator that’s been the standard on our SuperLite® 17B Helmet for over three decades, to our easy breathing SCUBA regulators (plastic or metal), to the highest performance commercial diving helmet and full face mask regulators available in the world (see REX & EXO®BR).
Bulletins
Bulletins
BandMask 18 Bulletins
5 of 2019
Subject:
Acceptable Breathing Systems for Kirby Morgan® Helmets and BandMasks®
Products Affected:
All Kirby Morgan® helmets and BandMasks®
4 of 2019
Subject:
Maintenance Inspection Timetable for KMDSI Helmets and BandMasks
Products Affected:
All Kirby Morgan® helmets and BandMasks®
3 of 2019
Subject:
P/N 510-776 Exhaust Valve Color of Material Changed from Clear to Black
Products Affected:
205-025 Regulator Body Assembly, 225-120 Rebuild Kit, Balanced Scuba Regulator, 505-085 Regulator Body Assembly, 505-560 SS Balanced Reg Assy, Superflow 450, 505-725 Tri Valve Assembly, 505-729 Tri Valve Assembly, SL27, 505-730 Quad Valve Exhaust Assembly, 505-758 350 REGULATOR POD ASSEMBLY, 505-776 455 REGULATOR POD ASSEMBLY, 525-217 Soft Goods Overhaul Kit, 57, 525-218 Helmet Spares Kit, 57, 525-356 Kit, Soft Goods, 37/17K/17C/57 w/455 Reg, 525-358 Kit, Soft Goods Overhaul, 18/28, 525-359 Kit, Soft Goods Overhaul, 27 w/455 Reg., 525-360 Kit, Soft Goods Overhaul, 17A/B, 525-363 Kit,Soft Goods Overhaul, K/37/C, 525-364 Soft Goods Kit, KM97, 525-365 Kit, Soft Goods Overhaul, 27, 525-367 Kit, Soft Goods Overhaul 18/28 w/455 Reg, 525-368 Kit, Soft Goods Overhaul, KM 47, 525-370 Helmet Spares Kit, KM 97, 525-377 Kit, Soft Goods Overhaul, KM 77, 525-378 Helmet Spares Kit, KMDH 77, 525-380 Kit, Soft Goods Overhaul, KM 37 S.S., 525-381 Helmet Spares Kit, KM 37 S.S., 525-718 Reg. Rebuild Kit, S.S. Balanced, 525-752 Tri-Valve Exhaust Kit, 525-755 Tri-Valve Exhaust Kit, SL27, 525-763 Conversion Kit, 450 Regulator For SL 27, 525-764 Kit, REX Whisker Exhaust, 525-767 Rebuild Kit, 455 Balanced Regulator
1 of 2017
Subject:
BandMask® Hood Molded Face Seals now available separately / Sold as Kits
Products Affected:
BandMask® 18 with Molded Face Seal Hood installed, BandMask® 28 with Molded Face Seal Hood installed, 525-730 KMB-28 (S/M) Hood (w/S) Molded Face Seal, 525-731 KMB-28 (S/M) Hood (w/M) Molded Face Seal, 525-732 KMB-28 (L) Hood (w/M) Molded Face Seal, 525-733 KMB-28 (L) Hood (w/L) Molded Face Seal, 525-734 KMB-18 (S/M) Hood (w/S) Molded Face Seal, 525-735 KMB-18 (S/M) Hood (w/M) Molded Face Seal, 525-736 KMB-18 (L) Hood (w/M) Molded Face Seal, 525-737 KMB-18 (L) Hood (w/L) Molded Face Seal
7 of 2016
Subject:
O-ring Kits & Overseas Spares Kits Are Now Obsolete
O-rings From O-ring Kits Now In Soft Goods Kits Shipping Immediately
Products Affected:
525-019 O-ring Kit, SL 27, 37, 57, 17K, 525-301 O-ring Kit, SL 17B, 525-303 O-ring Kit, 18/28, 525-304 O-ring Kit, KM 97, 525-305 O-ring Kit, SL 17C, 525-306 O-ring Kit, KM 47, 525-307 O-ring Kit, KM 77, 525-308 O-ring Kit, 37SS
11 of 2016
Subject:
Soft Goods Overhaul Kits for Units with 455 Regulators
Products Affected:
KMB 18 and KMB 28 Band Masks with 455 regulators, SuperLite® 27 Helmet with 455 regulator, SuperLite® 17K Helmet with 455 regulator, SuperLite® 17C Helmet with 455 regulator, Kirby Morgan® 37 Helmet with 455 regulator, Kirby Morgan® 57 Helmet with 455 regulator
4 of 2016
Subject:
Standardization of Microphones & Earphones
Products Affected:
500-010/011 SuperLite® 17A/B Helmet, 500-599/600 SuperLite® 17C Helmet, 500-025/026/028/029 Band Mask® 18/28.
3 of 2016
Subject:
The 455 Stainless Steel, Balanced Regulator is Now Available as an Option from the Factory for the following Helmets & Band Masks
Products Affected:
500-050 & 051 KM 37 Helmets
500-040 & 041 SuperLite® 27® Helmets
500-600 & 599 SuperLite® 17C Helmets
500-028 & 029 KMB 28 Bandmasks®
500-025 & 026 KMB 18 Bandmasks®
9 of 2016
Subject:
Twenty Five Years is the Recommended Service Life for Fiberglass Shells, Frames & Yokes
14 of 2016
Subject:
The Stability of Whisker Clamps
Products Affected:
All Kirby Morgan Helmets and BandMasks® with Tri or Quad Valve Exhaust Systems, excluding the KM 47 fiberglass helmet and the KM 77 stainless steel helmet.
3 of 2013
Subject:
Service Life Recommendation for Fiberglass Shells and Frames/
MK 21 Shell Conversion
Products Affected:
Primarily older SL 17A/B Helmet Shells (P/N 520-065) and older KMB 18 BandMask® frames (P/N 520-055).
Not accepting requests for MK 21 conversions to SL 17s.
8 of 2015
Subject:
USE OF AFTER MARKET OR NON-GENUINE KIRBY MORGAN® PARTS
3 of 2015
Subject:
The 525-765 455 Balanced Regulator Conversion Kit
7 of 2015
Subject:
Effective immediately, 530-145 Locknuts no longer included with
Kirby Morgan Band Mask® Hoods. 510-712 replaces 525-740.
Products Affected:
Standard (foam face seal) Hood Assemblies w/Locknuts: 525-740.
Molded Face Seal Hood Assemblies P/Ns 525-730, 525-731, 525-732, 525-733, 525-734, 525-735, 525-
736, 525-737.
Mask Spares Kit 18/28, 525-327.
Overseas Spares Kit 18/28, 525-319.
12 of 2015
Subject:
Misuse/Abuse of Technician Training Certificates
Products Affected:
All Kirby Morgan® Products
6 of 2015
Subject:
This bulletin is to serve as a reminder of an important difference
in installation procedure between the port retainer screws for the
fiberglass helmets verses those of the stainless steel helmets.
1 of 2015
Subject:
Notice of False Training Certificates
Products Affected:
All Kirby Morgan® Products
3 of 2014
Subject:
Maintenance Manuals in New Modular Format on USB Flash Drive
Products Affected:
All Kirby Morgan Helmets & BandMasks®
14 of 2014
Subject:
Hard Copy Manuals No Longer Available. USB Flash Drive Manuals now ship with, and are available on our website for All Product Manuals (Modular Format).
Products Affected:
KMACS-5 and EXO® BR.
1 of 2014
Subject:
Unauthorized Sellers / Buyer Beware!
3 of 2013
Subject:
Service Life Recommendation for Fiberglass Shells and Frames/
MK 21 Shell Conversion
Products Affected:
Primarily older SL 17A/B Helmet Shells (P/N 520-065) and older KMB 18 BandMask® frames (P/N 520-055).
Not accepting requests for MK 21 conversions to SL 17s.
2 of 2012
Subject:
New Face Seal & Hood, and Bronze Band Screw P/N 530-097
Products Affected:
KMB-Band Masks® 18 and 28 (P/N: 500-025, 500-026, 500-028, and 500-029)
4 of 2011
Subject:
Diaphragm Part Number 510-553
Products Affected:
(Possibly) Regulator Diaphragms p/n's 510-553, 500-010, 500-011, 500-040, 500-041, 500-050, 500- 051, 500-100, 500-101, 500-025, 500-026, 500-028, 500-029, 500-599, 500-600, 505-069, 505-069NS, 505-027, 505-026, 525-309, 525-317, 525-319, 525-322, 525-323, 525-325, 525-327, 525-333, 525-341, 525-345, 525-347, 525-349, 525-360, 525-363, 525-365, 525-358, 525-381, 525-382, 525-388, 525-327, 305-175, 325-325 (Shipped January 23rd, 2009 through December 2010).
2 of 2010
Subject:
Anode Kits For KMDSI Helmets And BandMasks®.
Products Affected:
N/A
1 of 2010
Subject:
Starboard Whisker Wing, P/N 510-786; Port Whisker Wing, P/N 510-787.
Products Affected:
525-216, 525-218, 525-317, 525-319, 525-323, 525-325, 525-327, 525-333, 525-341, 525-347, 525-349, 525-752, 525-755, 525-759, all helmets and BandMasks except the KM-47 and 77.
2 of 2009
Subject:
Regulator Mount Nut Socket Wrench P/N 525-625
Products Affected:
525-620, Tool Kit w/Pouch
10 of 2009
Subject:
New Product Oral Nasal With Lens Retainer Kit, P/N 525-775 and Lens Retainer Kit, P/N 525-776
Products Affected:
All Kirby Morgan® Helmets Except The KM-47, KM-77 And The MK-21
7 of 2009
Subject:
New Product Tool Kit Pouch P/N 525-613
Products Affected:
P/N 525-620 and P/N 525-768
6 of 2009
Subject:
Discontinuance of P/N 510-510 KMB Hood and P/N 510-506
Products Affected:
P/N 510-510 and P/N 510-506
1 of 2008
Subject:
Dry Suit Inflation Installation onto a Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
Products Affected:
Dry Suit's with Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
1 of 2008
Subject:
One Way Valve Product Change
Products Affected:
300-145, 300-150, 300-155, 505-024, 505-025,505-060, 505-732, 525-049, 525-330 and all Kirby Morgan® Helmets and BandMask®.
6 of 2007
Subject:
New Flex Control Knobs, Part Numbers 520-524 & 520-525
Products Affected:
300-145, 300-150, 300-155, 325-095, 505-024, 505-025, 505-070, 505-071,
505-080, 505-081, 525-049, 525-311 and all Kirby Morgan® Helmets and BandMasks®.
1 of 2007
Subject:
Helmet Shell Repair Caution
Products Affected:
All Kirby Morgan® Helmets and BandMasks®
5 of 2007
Subject:
Microphones Now Shipping With Strain Relief Ring & Equalizing Vent
Products Affected:
515-022, 515-029, 315-201, 515-023, 515-033, 515-009, 315-206, 315-017, 515-024 and 515-030
4 of 2007
Subject:
SuperFlow® 450 Regulator Conversion Kit, Part #525-766
Products Affected:
Kirby Morgan® Helmets and BandMasks® with SuperFlow® 350 Regulator
3 of 2007
Subject:
Longer Waterproof Communications Connector Now Standard
Products Affected:
505-047 Male Waterproof Assembly, 505-065 Male Waterproof Assembly, SL27®, 515-024 Communication Assemble with MWP
3 of 2006
Subject:
KMB-18 & 28 Accessory Hard Shell, New Part #520-026 (replaces Part #520-010)
Products Affected:
KMB 18-28 Accessory Hard Shell
2 of 2006
Subject:
Replacements for Recalled Valves (Reference Safety Notice #1 of 2005)
Products Affected:
One Way Valve (part #555-195)
1 of 2006
Subject:
New Air Train Gasket, KMDSI Part #510-762
Products Affected:
SuperLite® and Kirby Morgan® helmets, and BandMask® model KMB 18
1 of 2005
Subject:
Defective One Way Valve Recall
Products Affected:
Kirby Morgan® helmets, BandMasks® and replacement parts. KMDSI P/N 555-195 One Way Valve and P/N 505-060 One Way Valve Assembly.
8 of 2005
Subject:
KMDSI BandMask® Band Keeper™ Kit - No Hood, P/N 525-121
Products Affected:
Kirby Morgan® BandMasks®
1 of 2005
Subject:
Regulator assembly Part # 505-069
Products Affected:
Kirby Morgan® helmets and BandMasks®
6 of 2005
Subject:
Discontinuance of “A” Side Block Assembly, P/N 505-022
Products Affected:
All helmets and BandMasks®
2 of 2004
Subject:
New Tri-Valve® Exhaust Kit Part # 525-752 and 525-755 (SL 27® only)
Products Affected:
All Kirby Morgan® SuperLite® Helmets and KMB BandMasks®
1 of 2004
Subject:
Possible damage to emergency valve main body (550-140) between male pipe threads and the "B" side block bodies (550-029) as well as the manifold block body (350-050) at the mating female pipe threads.
Products Affected:
Any Kirby Morgan® helmets or masks incorporating a side block or manifold block, or separate manifold block assembly.
1 of 2004
Subject:
Product Change to KMB 18 & 28 BandMask® Hoods
Products Affected:
All KMB BandMasks®
4 of 2003
Subject:
Change to KMB 18 & 28 BandMask®
Products Affected:
All KMB BandMasks®
3 of 2002
Subject:
Material Change to Part #510-509 KMB-18/28 Head Harness (spider)
Products Affected:
KMDSI Part #510-552
2 of 2002
Subject:
Product change to KMB 18/28 Hood& Face Seal
Products Affected:
KMB 18/28 hoods
1 of 2002
Subject:
Correct Orientation of Oral Nasal Body P/N 520-020 & Valve P/N 510-550
Products Affected:
All KMDSI Helmets and BandMasks®
2 of 2002
Subject:
Use of Lubricants on Regulator Exhaust Valve P/N 510-552
Products Affected:
KMDSI Part #510-552
1 of 2002
Subject:
Regulator Exhaust Valve Possible Leakage
Products Affected:
KMDSI Part #510-552, 305-175, 325-323, 325-325, 505-026, 505-027, 505-068, 505-069, 525-120, 525-255, 525-309
1 of 2002
Subject:
Maintenance Inspection Timetable for all KMDSI Helmets and BandMasks®
Products Affected:
All KMDSI helmets and BandMasks®
1 of 2001
Subject:
High Flow Auxiliary Valve Part # 505-070
Products Affected:
All SuperLite® Helmets and KMB BandMasks® manufactured prior to October 1993
3 of 1998
Subject:
Regulator Change
Products Affected:
KMB 18B BandMask®
1 of 1998
Subject:
Product materials change to SuperLite® 17, MK 21 Visor & KMB 18 Comfort Insert
Products Affected:
SuperLite® 17, MK 21 Visor & KMB 18 Comfort Insert
1 of 1997
Subject:
Predive Equipment Inspections
Products Affected:
Kirby Morgan® SuperLite® Helmets & BandMasks®
1 of 1997
Subject:
High Flow Emergency Valve
Products Affected:
SuperLite® 17, 27, KMB 18/28 and Manifold Block Assemblies
1 of 1996
Subject:
New silicone oral nasal mask part number 510-690
Products Affected:
Replace part numbers 510-540 and 510-547
1 of 1995
Subject:
Counterfeit Kirby Morgan® KMB-18 BandMask® Diving Masks and SuperLite®-17 Diving Helmets.
1 of 1993
Subject:
High Flow Emergency Valve
Products Affected:
SuperLite® 17, 27, KMB 18/28 and Manifold Block Assemblies
BandMask 28 Bulletins
4 of 2019
Subject:
Maintenance Inspection Timetable for KMDSI Helmets and BandMasks
Products Affected:
All Kirby Morgan® helmets and BandMasks®
3 of 2019
Subject:
P/N 510-776 Exhaust Valve Color of Material Changed from Clear to Black
Products Affected:
205-025 Regulator Body Assembly, 225-120 Rebuild Kit, Balanced Scuba Regulator, 505-085 Regulator Body Assembly, 505-560 SS Balanced Reg Assy, Superflow 450, 505-725 Tri Valve Assembly, 505-729 Tri Valve Assembly, SL27, 505-730 Quad Valve Exhaust Assembly, 505-758 350 REGULATOR POD ASSEMBLY, 505-776 455 REGULATOR POD ASSEMBLY, 525-217 Soft Goods Overhaul Kit, 57, 525-218 Helmet Spares Kit, 57, 525-356 Kit, Soft Goods, 37/17K/17C/57 w/455 Reg, 525-358 Kit, Soft Goods Overhaul, 18/28, 525-359 Kit, Soft Goods Overhaul, 27 w/455 Reg., 525-360 Kit, Soft Goods Overhaul, 17A/B, 525-363 Kit,Soft Goods Overhaul, K/37/C, 525-364 Soft Goods Kit, KM97, 525-365 Kit, Soft Goods Overhaul, 27, 525-367 Kit, Soft Goods Overhaul 18/28 w/455 Reg, 525-368 Kit, Soft Goods Overhaul, KM 47, 525-370 Helmet Spares Kit, KM 97, 525-377 Kit, Soft Goods Overhaul, KM 77, 525-378 Helmet Spares Kit, KMDH 77, 525-380 Kit, Soft Goods Overhaul, KM 37 S.S., 525-381 Helmet Spares Kit, KM 37 S.S., 525-718 Reg. Rebuild Kit, S.S. Balanced, 525-752 Tri-Valve Exhaust Kit, 525-755 Tri-Valve Exhaust Kit, SL27, 525-763 Conversion Kit, 450 Regulator For SL 27, 525-764 Kit, REX Whisker Exhaust, 525-767 Rebuild Kit, 455 Balanced Regulator
5 of 2019
Subject:
Acceptable Breathing Systems for Kirby Morgan® Helmets and BandMasks®
Products Affected:
All Kirby Morgan® helmets and BandMasks®
5 of 2018
Subject:
Counterfeit Kirby Morgan® 28 BandMasks®
1 of 2017
Subject:
BandMask® Hood Molded Face Seals now available separately / Sold as Kits
Products Affected:
BandMask® 18 with Molded Face Seal Hood installed, BandMask® 28 with Molded Face Seal Hood installed, 525-730 KMB-28 (S/M) Hood (w/S) Molded Face Seal, 525-731 KMB-28 (S/M) Hood (w/M) Molded Face Seal, 525-732 KMB-28 (L) Hood (w/M) Molded Face Seal, 525-733 KMB-28 (L) Hood (w/L) Molded Face Seal, 525-734 KMB-18 (S/M) Hood (w/S) Molded Face Seal, 525-735 KMB-18 (S/M) Hood (w/M) Molded Face Seal, 525-736 KMB-18 (L) Hood (w/M) Molded Face Seal, 525-737 KMB-18 (L) Hood (w/L) Molded Face Seal
7 of 2016
Subject:
O-ring Kits & Overseas Spares Kits Are Now Obsolete
O-rings From O-ring Kits Now In Soft Goods Kits Shipping Immediately
Products Affected:
525-019 O-ring Kit, SL 27, 37, 57, 17K, 525-301 O-ring Kit, SL 17B, 525-303 O-ring Kit, 18/28, 525-304 O-ring Kit, KM 97, 525-305 O-ring Kit, SL 17C, 525-306 O-ring Kit, KM 47, 525-307 O-ring Kit, KM 77, 525-308 O-ring Kit, 37SS
11 of 2016
Subject:
Soft Goods Overhaul Kits for Units with 455 Regulators
Products Affected:
KMB 18 and KMB 28 Band Masks with 455 regulators, SuperLite® 27 Helmet with 455 regulator, SuperLite® 17K Helmet with 455 regulator, SuperLite® 17C Helmet with 455 regulator, Kirby Morgan® 37 Helmet with 455 regulator, Kirby Morgan® 57 Helmet with 455 regulator
4 of 2016
Subject:
Standardization of Microphones & Earphones
Products Affected:
500-010/011 SuperLite® 17A/B Helmet, 500-599/600 SuperLite® 17C Helmet, 500-025/026/028/029 Band Mask® 18/28.
3 of 2016
Subject:
The 455 Stainless Steel, Balanced Regulator is Now Available as an Option from the Factory for the following Helmets & Band Masks
Products Affected:
500-050 & 051 KM 37 Helmets
500-040 & 041 SuperLite® 27® Helmets
500-600 & 599 SuperLite® 17C Helmets
500-028 & 029 KMB 28 Bandmasks®
500-025 & 026 KMB 18 Bandmasks®
14 of 2016
Subject:
The Stability of Whisker Clamps
Products Affected:
All Kirby Morgan Helmets and BandMasks® with Tri or Quad Valve Exhaust Systems, excluding the KM 47 fiberglass helmet and the KM 77 stainless steel helmet.
8 of 2015
Subject:
USE OF AFTER MARKET OR NON-GENUINE KIRBY MORGAN® PARTS
3 of 2015
Subject:
The 525-765 455 Balanced Regulator Conversion Kit
7 of 2015
Subject:
Effective immediately, 530-145 Locknuts no longer included with
Kirby Morgan Band Mask® Hoods. 510-712 replaces 525-740.
Products Affected:
Standard (foam face seal) Hood Assemblies w/Locknuts: 525-740.
Molded Face Seal Hood Assemblies P/Ns 525-730, 525-731, 525-732, 525-733, 525-734, 525-735, 525-
736, 525-737.
Mask Spares Kit 18/28, 525-327.
Overseas Spares Kit 18/28, 525-319.
12 of 2015
Subject:
Misuse/Abuse of Technician Training Certificates
Products Affected:
All Kirby Morgan® Products
6 of 2015
Subject:
This bulletin is to serve as a reminder of an important difference
in installation procedure between the port retainer screws for the
fiberglass helmets verses those of the stainless steel helmets.
1 of 2015
Subject:
Notice of False Training Certificates
Products Affected:
All Kirby Morgan® Products
3 of 2014
Subject:
Maintenance Manuals in New Modular Format on USB Flash Drive
Products Affected:
All Kirby Morgan Helmets & BandMasks®
14 of 2014
Subject:
Hard Copy Manuals No Longer Available. USB Flash Drive Manuals now ship with, and are available on our website for All Product Manuals (Modular Format).
Products Affected:
KMACS-5 and EXO® BR.
1 of 2014
Subject:
Unauthorized Sellers / Buyer Beware!
13 of 2014
Subject:
Air Train Stand Off Material & Part Number Change. 545-066 Stand Off Replaces 545-065 Metal Stand Off. 545-065 is NOW OBSOLETE
Products Affected:
KMB 28 Band Mask® Air Train Stand Offs only.
Mask P/Ns 500-028 KMB 28 Band Mask® w/Posts, 500-029 KMB 28 Band Mask® w/MWP.
2 of 2012
Subject:
New Face Seal & Hood, and Bronze Band Screw P/N 530-097
Products Affected:
KMB-Band Masks® 18 and 28 (P/N: 500-025, 500-026, 500-028, and 500-029)
4 of 2011
Subject:
Diaphragm Part Number 510-553
Products Affected:
(Possibly) Regulator Diaphragms p/n's 510-553, 500-010, 500-011, 500-040, 500-041, 500-050, 500- 051, 500-100, 500-101, 500-025, 500-026, 500-028, 500-029, 500-599, 500-600, 505-069, 505-069NS, 505-027, 505-026, 525-309, 525-317, 525-319, 525-322, 525-323, 525-325, 525-327, 525-333, 525-341, 525-345, 525-347, 525-349, 525-360, 525-363, 525-365, 525-358, 525-381, 525-382, 525-388, 525-327, 305-175, 325-325 (Shipped January 23rd, 2009 through December 2010).
2 of 2010
Subject:
Anode Kits For KMDSI Helmets And BandMasks®.
Products Affected:
N/A
1 of 2010
Subject:
Starboard Whisker Wing, P/N 510-786; Port Whisker Wing, P/N 510-787.
Products Affected:
525-216, 525-218, 525-317, 525-319, 525-323, 525-325, 525-327, 525-333, 525-341, 525-347, 525-349, 525-752, 525-755, 525-759, all helmets and BandMasks except the KM-47 and 77.
2 of 2009
Subject:
Regulator Mount Nut Socket Wrench P/N 525-625
Products Affected:
525-620, Tool Kit w/Pouch
10 of 2009
Subject:
New Product Oral Nasal With Lens Retainer Kit, P/N 525-775 and Lens Retainer Kit, P/N 525-776
Products Affected:
All Kirby Morgan® Helmets Except The KM-47, KM-77 And The MK-21
7 of 2009
Subject:
New Product Tool Kit Pouch P/N 525-613
Products Affected:
P/N 525-620 and P/N 525-768
6 of 2009
Subject:
Discontinuance of P/N 510-510 KMB Hood and P/N 510-506
Products Affected:
P/N 510-510 and P/N 510-506
1 of 2008
Subject:
Dry Suit Inflation Installation onto a Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
Products Affected:
Dry Suit's with Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
1 of 2008
Subject:
One Way Valve Product Change
Products Affected:
300-145, 300-150, 300-155, 505-024, 505-025,505-060, 505-732, 525-049, 525-330 and all Kirby Morgan® Helmets and BandMask®.
6 of 2007
Subject:
New Flex Control Knobs, Part Numbers 520-524 & 520-525
Products Affected:
300-145, 300-150, 300-155, 325-095, 505-024, 505-025, 505-070, 505-071,
505-080, 505-081, 525-049, 525-311 and all Kirby Morgan® Helmets and BandMasks®.
1 of 2007
Subject:
Helmet Shell Repair Caution
Products Affected:
All Kirby Morgan® Helmets and BandMasks®
5 of 2007
Subject:
Microphones Now Shipping With Strain Relief Ring & Equalizing Vent
Products Affected:
515-022, 515-029, 315-201, 515-023, 515-033, 515-009, 315-206, 315-017, 515-024 and 515-030
4 of 2007
Subject:
SuperFlow® 450 Regulator Conversion Kit, Part #525-766
Products Affected:
Kirby Morgan® Helmets and BandMasks® with SuperFlow® 350 Regulator
3 of 2007
Subject:
Longer Waterproof Communications Connector Now Standard
Products Affected:
505-047 Male Waterproof Assembly, 505-065 Male Waterproof Assembly, SL27®, 515-024 Communication Assemble with MWP
3 of 2006
Subject:
KMB-18 & 28 Accessory Hard Shell, New Part #520-026 (replaces Part #520-010)
Products Affected:
KMB 18-28 Accessory Hard Shell
2 of 2006
Subject:
Replacements for Recalled Valves (Reference Safety Notice #1 of 2005)
Products Affected:
One Way Valve (part #555-195)
1 of 2005
Subject:
Defective One Way Valve Recall
Products Affected:
Kirby Morgan® helmets, BandMasks® and replacement parts. KMDSI P/N 555-195 One Way Valve and P/N 505-060 One Way Valve Assembly.
8 of 2005
Subject:
KMDSI BandMask® Band Keeper™ Kit - No Hood, P/N 525-121
Products Affected:
Kirby Morgan® BandMasks®
1 of 2005
Subject:
Regulator assembly Part # 505-069
Products Affected:
Kirby Morgan® helmets and BandMasks®
2 of 2004
Subject:
Regulator Change
Products Affected:
Kirby Morgan® KMB 28B BandMasks® Manufactured after July, 2004
1 of 2004
Subject:
Possible damage to emergency valve main body (550-140) between male pipe threads and the "B" side block bodies (550-029) as well as the manifold block body (350-050) at the mating female pipe threads.
Products Affected:
Any Kirby Morgan® helmets or masks incorporating a side block or manifold block, or separate manifold block assembly.
1 of 2004
Subject:
Product Change to KMB 18 & 28 BandMask® Hoods
Products Affected:
All KMB BandMasks®
2 of 2004
Subject:
New Tri-Valve® Exhaust Kit Part # 525-752 and 525-755 (SL 27® only)
Products Affected:
All Kirby Morgan® SuperLite® Helmets and KMB BandMasks®
4 of 2003
Subject:
Change to KMB 18 & 28 BandMask®
Products Affected:
All KMB BandMasks®
3 of 2002
Subject:
Material Change to Part #510-509 KMB-18/28 Head Harness (spider)
Products Affected:
KMDSI Part #510-552
2 of 2002
Subject:
Product change to KMB 18/28 Hood& Face Seal
Products Affected:
KMB 18/28 hoods
1 of 2002
Subject:
Correct Orientation of Oral Nasal Body P/N 520-020 & Valve P/N 510-550
Products Affected:
All KMDSI Helmets and BandMasks®
2 of 2002
Subject:
Use of Lubricants on Regulator Exhaust Valve P/N 510-552
Products Affected:
KMDSI Part #510-552
1 of 2002
Subject:
Regulator Exhaust Valve Possible Leakage
Products Affected:
KMDSI Part #510-552, 305-175, 325-323, 325-325, 505-026, 505-027, 505-068, 505-069, 525-120, 525-255, 525-309
1 of 2002
Subject:
Maintenance Inspection Timetable for all KMDSI Helmets and BandMasks®
Products Affected:
All KMDSI helmets and BandMasks®
1 of 2001
Subject:
High Flow Auxiliary Valve Part # 505-070
Products Affected:
All SuperLite® Helmets and KMB BandMasks® manufactured prior to October 1993
1 of 1997
Subject:
Predive Equipment Inspections
Products Affected:
Kirby Morgan® SuperLite® Helmets & BandMasks®
1 of 1997
Subject:
High Flow Emergency Valve
Products Affected:
SuperLite® 17, 27, KMB 18/28 and Manifold Block Assemblies
1 of 1996
Subject:
New silicone oral nasal mask part number 510-690
Products Affected:
Replace part numbers 510-540 and 510-547
1 of 1993
Subject:
High Flow Emergency Valve
Products Affected:
SuperLite® 17, 27, KMB 18/28 and Manifold Block Assemblies
EXO-BR Bulletins
2 of 2017
Subject:
EXO-BR Full Face Mask Discontinued
Products Affected:
300-036 EXO-BR Mask, No Communications, 300-037 EXO-BR with Communications Posts, 300-038 EXO-BR with Communications, MWP
8 of 2015
Subject:
USE OF AFTER MARKET OR NON-GENUINE KIRBY MORGAN® PARTS
12 of 2015
Subject:
Misuse/Abuse of Technician Training Certificates
Products Affected:
All Kirby Morgan® Products
10 of 2015
Subject:
Helmet & Band Mask® Regulators Now Packaged & Sold as “Kits”
Products Affected:
305-040 EXO BR Regulator
505-027 SuperFlow® “B” Regulator Assembly,
505-026 “A” Regulator Assembly,
505-069 350 (1" tube).
505-278 REX Regulator Assembly.
9 of 2015
Subject:
350-032 Main Tube is Replaced by 350-143 Main Tube
Products Affected:
350-032 Main tube, BR
505-278 REX® Regulator Assembly
305-040 Balanced Regulator Assembly, EXO-BR®.
1 of 2015
Subject:
Notice of False Training Certificates
Products Affected:
All Kirby Morgan® Products
1 of 2014
Subject:
Unauthorized Sellers / Buyer Beware!
14 of 2014
Subject:
Hard Copy Manuals No Longer Available. USB Flash Drive Manuals now ship with, and are available on our website for All Product Manuals (Modular Format).
Products Affected:
KMACS-5 and EXO® BR.
3 of 2012
Subject:
Discontinuance of P/N 300-902 EXO-26 (EXO-BR) Mask Bag
5 of 2011
Subject:
New Product Maintenance & Repair Log Book, P/N 125-001
Products Affected:
All complete Helmets and Masks, including part numbers 300-036, 300-036MS, 300-037, 300-038, 300-038MS, 500-010, 500-011, 500-025, 500-026, 500-028, 500-029, 500-040, 500-041, 500-050, 500-051, 500-050NS, 500-051NS, 500-070, 500-071, 500-080, 500-081, 500-090, 500-091, 500-100, 500-101, 500-117, 500-599, 500-600 and 800-050
4 of 2011
Subject:
Diaphragm Part Number 510-553
Products Affected:
(Possibly) Regulator Diaphragms p/n's 510-553, 500-010, 500-011, 500-040, 500-041, 500-050, 500- 051, 500-100, 500-101, 500-025, 500-026, 500-028, 500-029, 500-599, 500-600, 505-069, 505-069NS, 505-027, 505-026, 525-309, 525-317, 525-319, 525-322, 525-323, 525-325, 525-327, 525-333, 525-341, 525-345, 525-347, 525-349, 525-360, 525-363, 525-365, 525-358, 525-381, 525-382, 525-388, 525-327, 305-175, 325-325 (Shipped January 23rd, 2009 through December 2010).
1 of 2009
Subject:
Communication Module used on Kirby Morgan® Helmets & EXO® Masks P/N 320-025
Products Affected:
305-020, 315-201, 315-206, 315-210, 315-215, 320-023, 320-024, 515-023,
515-024, 520-130, 520-131, 520-132.
5 of 2007
Subject:
Microphones Now Shipping With Strain Relief Ring & Equalizing Vent
Products Affected:
515-022, 515-029, 315-201, 515-023, 515-033, 515-009, 315-206, 315-017, 515-024 and 515-030
3 of 2007
Subject:
Longer Waterproof Communications Connector Now Standard
Products Affected:
505-047 Male Waterproof Assembly, 505-065 Male Waterproof Assembly, SL27®, 515-024 Communication Assemble with MWP
12 of 2005
Subject:
New Microphone for Kirby Morgan® Masks and Helmets
Products Affected:
KMDSI Masks, Helmets and all communications sets and assemblies.
2 of 2005
Subject:
New Hi Flow Inlet Swivel - Part #305-017
Products Affected:
KMDSI Part #305-017 Hi Flow Inlet Swivel for use with EXO®-26®, EXO®-BR®, and M-48 SuperMask®
1 of 2005
Subject:
New EXO®-BR Silicone Oral/Nasal w/tie wraps
Part #325-055
Products Affected:
EXO®-BR®
1 of 2004
Subject:
Possible damage to emergency valve main body (550-140) between male pipe threads and the "B" side block bodies (550-029) as well as the manifold block body (350-050) at the mating female pipe threads.
Products Affected:
Any Kirby Morgan® helmets or masks incorporating a side block or manifold block, or separate manifold block assembly.
1 of 2003
Subject:
EXO® Oral Nasal Tie Wrap
Products Affected:
All EXO® BR & BRMS Full Face Masks
1 of 2000
Subject:
Material change to 305-057 EXO® BR Regulator Inlet Valve
Products Affected:
EXO® BR (Balanced Regulator) Full Face Masks
1 of 1999
Subject:
Communications Connection Nuts
Products Affected:
All bare wire communications posts
2 of 1999
Subject:
Product material change to EXO® Hard Shell
Products Affected:
EXO® Hard Shell
KM 37 Bulletins
5 of 2019
Subject:
Acceptable Breathing Systems for Kirby Morgan® Helmets and BandMasks®
Products Affected:
All Kirby Morgan® helmets and BandMasks®
4 of 2019
Subject:
Maintenance Inspection Timetable for KMDSI Helmets and BandMasks
Products Affected:
All Kirby Morgan® helmets and BandMasks®
3 of 2019
Subject:
P/N 510-776 Exhaust Valve Color of Material Changed from Clear to Black
Products Affected:
205-025 Regulator Body Assembly, 225-120 Rebuild Kit, Balanced Scuba Regulator, 505-085 Regulator Body Assembly, 505-560 SS Balanced Reg Assy, Superflow 450, 505-725 Tri Valve Assembly, 505-729 Tri Valve Assembly, SL27, 505-730 Quad Valve Exhaust Assembly, 505-758 350 REGULATOR POD ASSEMBLY, 505-776 455 REGULATOR POD ASSEMBLY, 525-217 Soft Goods Overhaul Kit, 57, 525-218 Helmet Spares Kit, 57, 525-356 Kit, Soft Goods, 37/17K/17C/57 w/455 Reg, 525-358 Kit, Soft Goods Overhaul, 18/28, 525-359 Kit, Soft Goods Overhaul, 27 w/455 Reg., 525-360 Kit, Soft Goods Overhaul, 17A/B, 525-363 Kit,Soft Goods Overhaul, K/37/C, 525-364 Soft Goods Kit, KM97, 525-365 Kit, Soft Goods Overhaul, 27, 525-367 Kit, Soft Goods Overhaul 18/28 w/455 Reg, 525-368 Kit, Soft Goods Overhaul, KM 47, 525-370 Helmet Spares Kit, KM 97, 525-377 Kit, Soft Goods Overhaul, KM 77, 525-378 Helmet Spares Kit, KMDH 77, 525-380 Kit, Soft Goods Overhaul, KM 37 S.S., 525-381 Helmet Spares Kit, KM 37 S.S., 525-718 Reg. Rebuild Kit, S.S. Balanced, 525-752 Tri-Valve Exhaust Kit, 525-755 Tri-Valve Exhaust Kit, SL27, 525-763 Conversion Kit, 450 Regulator For SL 27, 525-764 Kit, REX Whisker Exhaust, 525-767 Rebuild Kit, 455 Balanced Regulator
6 of 2018
Subject:
Head Cushion Snaps Material—Changed to Stainless Steel
Products Affected:
510-754 Head Cushion (head cushion of all helmets excluding the SuperLite® 17B), 510-722 Head Cushion Bag (the outer covering of 510-754), All Helmets (excluding the SuperLite® 17B), Spares Kits 525-119, 525-218, 525-250, 525-322, 525-333, 525-341, 525-371, 525-378, 525-381
11 of 2016
Subject:
Soft Goods Overhaul Kits for Units with 455 Regulators
Products Affected:
KMB 18 and KMB 28 Band Masks with 455 regulators, SuperLite® 27 Helmet with 455 regulator, SuperLite® 17K Helmet with 455 regulator, SuperLite® 17C Helmet with 455 regulator, Kirby Morgan® 37 Helmet with 455 regulator, Kirby Morgan® 57 Helmet with 455 regulator
3 of 2016
Subject:
The 455 Stainless Steel, Balanced Regulator is Now Available as an Option from the Factory for the following Helmets & Band Masks
Products Affected:
500-050 & 051 KM 37 Helmets
500-040 & 041 SuperLite® 27® Helmets
500-600 & 599 SuperLite® 17C Helmets
500-028 & 029 KMB 28 Bandmasks®
500-025 & 026 KMB 18 Bandmasks®
9 of 2016
Subject:
Twenty Five Years is the Recommended Service Life for Fiberglass Shells, Frames & Yokes
8 of 2016
Subject:
P/N 525-211 Sealed Pull Pin Overhaul Kit Now for Two Pins
Products Affected:
P/N 525-211 Sealed Pull Pin Overhaul Kit
5 of 2014 (UPDATED March 23, 2016)
Subject:
Unauthorized “Painting” (resurfacing) Helmet Shells & KMB 18 Frames
Serial Number Tampering
Products Affected:
All fiberglass helmets / KMB 18 BandMasks.
14 of 2016
Subject:
The Stability of Whisker Clamps
Products Affected:
All Kirby Morgan Helmets and BandMasks® with Tri or Quad Valve Exhaust Systems, excluding the KM 47 fiberglass helmet and the KM 77 stainless steel helmet.
7 of 2016
Subject:
O-ring Kits & Overseas Spares Kits Are Now Obsolete
O-rings From O-ring Kits Now In Soft Goods Kits Shipping Immediately
Products Affected:
525-019 O-ring Kit, SL 27, 37, 57, 17K, 525-301 O-ring Kit, SL 17B, 525-303 O-ring Kit, 18/28, 525-304 O-ring Kit, KM 97, 525-305 O-ring Kit, SL 17C, 525-306 O-ring Kit, KM 47, 525-307 O-ring Kit, KM 77, 525-308 O-ring Kit, 37SS
4 of 2015
Subject:
525-769 Conversion Kit, 455 Regulator for KM 77
525-116 Front Standoff Kit
525-395 Conversion Kit, Rex Regulator for 37SS
1 of 2015
Subject:
Notice of False Training Certificates
Products Affected:
All Kirby Morgan® Products
8 of 2015
Subject:
USE OF AFTER MARKET OR NON-GENUINE KIRBY MORGAN® PARTS
3 of 2015
Subject:
The 525-765 455 Balanced Regulator Conversion Kit
12 of 2015
Subject:
Misuse/Abuse of Technician Training Certificates
Products Affected:
All Kirby Morgan® Products
6 of 2015
Subject:
This bulletin is to serve as a reminder of an important difference
in installation procedure between the port retainer screws for the
fiberglass helmets verses those of the stainless steel helmets.
14 of 2015
Subject:
P/N 510-754 Head Cushions Change from Zippers to VELCRO® Brand Closures
Products Affected:
510-722 Head Cushion Bag, for Head Cushion 510-754, used in all helmets except the SL 17A/B.
5 of 2015
Subject:
550-232 Sleeves for the sealed pull pins now marked
with groove, effective immediately
Products Affected:
550-232 Pull Pin Sleeve (sold in the 525-112 Sleeve Kits only. Two per kit).
525-112 Pull Pin Sleeve Kit
12 of 2014
Subject:
540-039 Front Stand Offs (×2 per helmet) added to Kirby Morgan Helmets
Products Affected:
All Kirby Morgan Helmets except the SuperLite 17B.
560-074 Bottom Ring, 560-517 Stainless Steel Helmet Shell,
All shells with Bottom Ring Assemblies: 505-105, 505-106, 505-107, 505-108, 505-162.
3 of 2014
Subject:
Maintenance Manuals in New Modular Format on USB Flash Drive
Products Affected:
All Kirby Morgan Helmets & BandMasks®
1 of 2014
Subject:
Unauthorized Sellers / Buyer Beware!
14 of 2014
Subject:
Hard Copy Manuals No Longer Available. USB Flash Drive Manuals now ship with, and are available on our website for All Product Manuals (Modular Format).
Products Affected:
KMACS-5 and EXO® BR.
5 of 2014 (UPDATED March 23, 2016)
Subject:
Unauthorized “Painting” (resurfacing) Helmet Shells & KMB 18 Frames
Serial Number Tampering
Products Affected:
All fiberglass helmets / KMB 18 BandMasks.
4 of 2013
Subject:
Chin Strap Assembly, 505-111 Lengthened
Products Affected:
Helmets affected: SuperLite® 17B, 17C, 27®, KM 37, KM37NS, KM 47, KM 57, KM 77, KM 37SS.
Parts affected: 505-111 Chin Strap Assembly (not sold separately*).
*Sold as:
505-748 Chin Strap Assembly with snaps, SS (order for stainless steel helmets).
525-716 Chin Strap Assembly Kit (order for fiberglass helmets).
All the following Neck Ring Assemblies: 505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-
104, 505-117, 505-118, 505-119, 505-120.
2 of 2013
Subject:
Re. 505-110 Sealed Pull Pins- standard on all Kirby Morgan helmets except
the SL 17B & MK 21
Products Affected:
Kirby Morgan helmets except the SL 17B & MK 21.
1 of 2013
Subject:
Head Cushion Foam Kit P/N 525-746
7 of 2012
Subject:
Pull Pin Sleeve Kit P/N 525-112
5 of 2012
Subject:
Washer P/N 530-556 Added to Kit P/N 525-717 KM 37, 47, 57 and 17K Brackets Kit
4 of 2012
Subject:
New Head Cushion (p/n 510-754), Improved Head Cushion Foam Spacer Kit (HCFS, p/n 525-745) and Improved Chin Cushion (p/n 510-683)
Products Affected:
Kirby Morgan dive helmets SL-17C, SL-27, KM-37, KM-47, KM-57, KM-77, and KM-37SS.
1 of 2011
Subject:
Earphone Speaker, 515-008, is replaced by 515-090 Earphone Speaker
Products Affected:
(No change to these part numbers).
5 of 2011
Subject:
New Product Maintenance & Repair Log Book, P/N 125-001
Products Affected:
All complete Helmets and Masks, including part numbers 300-036, 300-036MS, 300-037, 300-038, 300-038MS, 500-010, 500-011, 500-025, 500-026, 500-028, 500-029, 500-040, 500-041, 500-050, 500-051, 500-050NS, 500-051NS, 500-070, 500-071, 500-080, 500-081, 500-090, 500-091, 500-100, 500-101, 500-117, 500-599, 500-600 and 800-050
4 of 2011
Subject:
Diaphragm Part Number 510-553
Products Affected:
(Possibly) Regulator Diaphragms p/n's 510-553, 500-010, 500-011, 500-040, 500-041, 500-050, 500- 051, 500-100, 500-101, 500-025, 500-026, 500-028, 500-029, 500-599, 500-600, 505-069, 505-069NS, 505-027, 505-026, 525-309, 525-317, 525-319, 525-322, 525-323, 525-325, 525-327, 525-333, 525-341, 525-345, 525-347, 525-349, 525-360, 525-363, 525-365, 525-358, 525-381, 525-382, 525-388, 525-327, 305-175, 325-325 (Shipped January 23rd, 2009 through December 2010).
4 of 2010
Subject:
Head Cushion Foam Spacer Kit (HCFS) Part Number 525-745
2 of 2010
Subject:
Anode Kits For KMDSI Helmets And BandMasks®.
Products Affected:
N/A
7 of 2010
Subject:
530-110 Lock Nut Replaces 330-320 Lock Nut
Products Affected:
505-110 Sealed Pull Pin Assembly
1 of 2010
Subject:
Starboard Whisker Wing, P/N 510-786; Port Whisker Wing, P/N 510-787.
Products Affected:
525-216, 525-218, 525-317, 525-319, 525-323, 525-325, 525-327, 525-333, 525-341, 525-347, 525-349, 525-752, 525-755, 525-759, all helmets and BandMasks except the KM-47 and 77.
6 of 2010
Subject:
Length of Part Number 530-024, Screw, Increased
Products Affected:
505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-101,
505-102, 505-104, 505-118, 505-119, 505-120, 505-744, 505-745, 505-746, 505-747, 525-216, 525-230,
525-341, 525-347, 525-349, 525-372 and 525-379.
2 of 2009
Subject:
Regulator Mount Nut Socket Wrench P/N 525-625
Products Affected:
525-620, Tool Kit w/Pouch
1 of 2009
Subject:
Kirby Morgan Helmet Retaining Systems
10 of 2009
Subject:
New Product Oral Nasal With Lens Retainer Kit, P/N 525-775 and Lens Retainer Kit, P/N 525-776
Products Affected:
All Kirby Morgan® Helmets Except The KM-47, KM-77 And The MK-21
1 of 2009
Subject:
Communication Module used on Kirby Morgan® Helmets & EXO® Masks P/N 320-025
Products Affected:
305-020, 315-201, 315-206, 315-210, 315-215, 320-023, 320-024, 515-023,
515-024, 520-130, 520-131, 520-132.
9 of 2009
Subject:
New Product Oral Nasal Mask P/N 510-747
Products Affected:
P/N 510-690 Oral Nasal
7 of 2009
Subject:
New Product Tool Kit Pouch P/N 525-613
Products Affected:
P/N 525-620 and P/N 525-768
1 of 2008
Subject:
Dry Suit Inflation Installation onto a Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
Products Affected:
Dry Suit's with Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
2 of 2008
Subject:
Kirby Morgan® Dive Systems is now shipping all helmets (except the 17B) with a new Pull Strap
assembly that has a 1" Stainless Steel "D" ring sewn on the end to hang the neck ring assembly and
allow proper drying. The length of the Pull Strap remains the same.
Products Affected:
All Helmets except SuperLite® 17B
All neck ring assemblies: 505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-101, 505-102,
505-104, 505-117, 505-118, 505-119, 505-120, 505-744, 505-745, 505-746, 505-747.
Kit:
525-230 Dry Suit Neck Ring Ki
1 of 2008
Subject:
One Way Valve Product Change
Products Affected:
300-145, 300-150, 300-155, 505-024, 505-025,505-060, 505-732, 525-049, 525-330 and all Kirby Morgan® Helmets and BandMask®.
6 of 2007
Subject:
New Flex Control Knobs, Part Numbers 520-524 & 520-525
Products Affected:
300-145, 300-150, 300-155, 325-095, 505-024, 505-025, 505-070, 505-071,
505-080, 505-081, 525-049, 525-311 and all Kirby Morgan® Helmets and BandMasks®.
1 of 2007
Subject:
Helmet Shell Repair Caution
Products Affected:
All Kirby Morgan® Helmets and BandMasks®
5 of 2007
Subject:
Microphones Now Shipping With Strain Relief Ring & Equalizing Vent
Products Affected:
515-022, 515-029, 315-201, 515-023, 515-033, 515-009, 315-206, 315-017, 515-024 and 515-030
4 of 2007
Subject:
SuperFlow® 450 Regulator Conversion Kit, Part #525-766
Products Affected:
Kirby Morgan® Helmets and BandMasks® with SuperFlow® 350 Regulator
3 of 2007
Subject:
Longer Waterproof Communications Connector Now Standard
Products Affected:
505-047 Male Waterproof Assembly, 505-065 Male Waterproof Assembly, SL27®, 515-024 Communication Assemble with MWP
7 of 2006
Subject:
Helmet Sealed Pull Pins (Part #505-110) No Longer Marked with an “S”
Products Affected:
All new Kirby Morgan® helmets that utilize the locking collar design
5 of 2006
Subject:
Whisker Clamp Replacement Kit # 525-032
Products Affected:
KMDSI Tri/Quad valve assemblies P/N’s 525-752, 525-755 & 525-759
2 of 2006
Subject:
Replacements for Recalled Valves (Reference Safety Notice #1 of 2005)
Products Affected:
One Way Valve (part #555-195)
1 of 2006
Subject:
New Air Train Gasket, KMDSI Part #510-762
Products Affected:
SuperLite® and Kirby Morgan® helmets, and BandMask® model KMB 18
12 of 2005
Subject:
New Microphone for Kirby Morgan® Masks and Helmets
Products Affected:
KMDSI Masks, Helmets and all communications sets and assemblies.
1 of 2005
Subject:
Defective One Way Valve Recall
Products Affected:
Kirby Morgan® helmets, BandMasks® and replacement parts. KMDSI P/N 555-195 One Way Valve and P/N 505-060 One Way Valve Assembly.
11 of 2005
Subject:
Hinge Bolt Part #530-027
Products Affected:
Kirby Morgan® Helmets
1 of 2005
Subject:
Regulator assembly Part # 505-069
Products Affected:
Kirby Morgan® helmets and BandMasks®
16 of 2005
Subject:
New Stepped Neck Dam Ring Part# 560-078 and Split Ring Part #540-105
Products Affected:
Kirby Morgan® helmets (with the exception of the SuperLite® 17B)
4 of 2005
Subject:
Quad Valve™ Cover Kit (KMDSI Part #525-762)
Products Affected:
Kirby Morgan® helmets currently equipped with a Tri-Valve® exhaust,
3 of 2005
Subject:
Quad Valve™ Exhaust (KMDSI Part #525-759) Now Standard
Products Affected:
Kirby Morgan®- 37 Helmet , 500-050/051 & SuperLite® -17 500-010/011
15 of 2005
Subject:
New Fasteners
Products Affected:
Kirby Morgan® Helmets and Masks Part Numbers 530-035, 530-040, 530-045
1 of 2004
Subject:
Possible damage to emergency valve main body (550-140) between male pipe threads and the "B" side block bodies (550-029) as well as the manifold block body (350-050) at the mating female pipe threads.
Products Affected:
Any Kirby Morgan® helmets or masks incorporating a side block or manifold block, or separate manifold block assembly.
3 of 2004
Subject:
Quad Valve™ Exhaust (KMDSI Part #525-759)
Products Affected:
All Kirby Morgan® SuperLite® Helmets and KM 37/57
1 of 2002
Subject:
Correct Orientation of Oral Nasal Body P/N 520-020 & Valve P/N 510-550
Products Affected:
All KMDSI Helmets and BandMasks®
1 of 2002
Subject:
Maintenance Inspection Timetable for all KMDSI Helmets and BandMasks®
Products Affected:
All KMDSI helmets and BandMasks®
1 of 2001
Subject:
"Painting" (resurfacing) Helmet Shells & Mask Frames
Products Affected:
All KMDSI Fiberglass Helmet Shells & Fiberglass Mask Frames
KM 37SS Bulletins
5 of 2019
Subject:
Acceptable Breathing Systems for Kirby Morgan® Helmets and BandMasks®
Products Affected:
All Kirby Morgan® helmets and BandMasks®
4 of 2019
Subject:
Maintenance Inspection Timetable for KMDSI Helmets and BandMasks
Products Affected:
All Kirby Morgan® helmets and BandMasks®
3 of 2019
Subject:
P/N 510-776 Exhaust Valve Color of Material Changed from Clear to Black
Products Affected:
205-025 Regulator Body Assembly, 225-120 Rebuild Kit, Balanced Scuba Regulator, 505-085 Regulator Body Assembly, 505-560 SS Balanced Reg Assy, Superflow 450, 505-725 Tri Valve Assembly, 505-729 Tri Valve Assembly, SL27, 505-730 Quad Valve Exhaust Assembly, 505-758 350 REGULATOR POD ASSEMBLY, 505-776 455 REGULATOR POD ASSEMBLY, 525-217 Soft Goods Overhaul Kit, 57, 525-218 Helmet Spares Kit, 57, 525-356 Kit, Soft Goods, 37/17K/17C/57 w/455 Reg, 525-358 Kit, Soft Goods Overhaul, 18/28, 525-359 Kit, Soft Goods Overhaul, 27 w/455 Reg., 525-360 Kit, Soft Goods Overhaul, 17A/B, 525-363 Kit,Soft Goods Overhaul, K/37/C, 525-364 Soft Goods Kit, KM97, 525-365 Kit, Soft Goods Overhaul, 27, 525-367 Kit, Soft Goods Overhaul 18/28 w/455 Reg, 525-368 Kit, Soft Goods Overhaul, KM 47, 525-370 Helmet Spares Kit, KM 97, 525-377 Kit, Soft Goods Overhaul, KM 77, 525-378 Helmet Spares Kit, KMDH 77, 525-380 Kit, Soft Goods Overhaul, KM 37 S.S., 525-381 Helmet Spares Kit, KM 37 S.S., 525-718 Reg. Rebuild Kit, S.S. Balanced, 525-752 Tri-Valve Exhaust Kit, 525-755 Tri-Valve Exhaust Kit, SL27, 525-763 Conversion Kit, 450 Regulator For SL 27, 525-764 Kit, REX Whisker Exhaust, 525-767 Rebuild Kit, 455 Balanced Regulator
6 of 2018
Subject:
Head Cushion Snaps Material—Changed to Stainless Steel
Products Affected:
510-754 Head Cushion (head cushion of all helmets excluding the SuperLite® 17B), 510-722 Head Cushion Bag (the outer covering of 510-754), All Helmets (excluding the SuperLite® 17B), Spares Kits 525-119, 525-218, 525-250, 525-322, 525-333, 525-341, 525-371, 525-378, 525-381
12 of 2016
Subject:
Update: Cleaning & Protection Products for “Rust & Rust Spots” on Stainless Steel Helmet Shells
Products Affected:
Kirby Morgan® 77 Helmet, Kirby Morgan® 37SS Helmet, Kirby Morgan® 97 Helmet
6 of 2016
Subject:
560-540 Stainless Steel Side Block Body / Low Pressure Ports
Products Affected:
560-540 Stainless Steel Side Block Body, 505-732 Stainless Steel Side Block Assembly,
KM 77 Helmets 500-090/-091, KM 37SS Helmet 500-100/-101, KM 97 Helmets 500-700/-701.
8 of 2016
Subject:
P/N 525-211 Sealed Pull Pin Overhaul Kit Now for Two Pins
Products Affected:
P/N 525-211 Sealed Pull Pin Overhaul Kit
14 of 2016
Subject:
The Stability of Whisker Clamps
Products Affected:
All Kirby Morgan Helmets and BandMasks® with Tri or Quad Valve Exhaust Systems, excluding the KM 47 fiberglass helmet and the KM 77 stainless steel helmet.
7 of 2016
Subject:
O-ring Kits & Overseas Spares Kits Are Now Obsolete
O-rings From O-ring Kits Now In Soft Goods Kits Shipping Immediately
Products Affected:
525-019 O-ring Kit, SL 27, 37, 57, 17K, 525-301 O-ring Kit, SL 17B, 525-303 O-ring Kit, 18/28, 525-304 O-ring Kit, KM 97, 525-305 O-ring Kit, SL 17C, 525-306 O-ring Kit, KM 47, 525-307 O-ring Kit, KM 77, 525-308 O-ring Kit, 37SS
4 of 2015
Subject:
525-769 Conversion Kit, 455 Regulator for KM 77
525-116 Front Standoff Kit
525-395 Conversion Kit, Rex Regulator for 37SS
1 of 2015
Subject:
Notice of False Training Certificates
Products Affected:
All Kirby Morgan® Products
8 of 2015
Subject:
USE OF AFTER MARKET OR NON-GENUINE KIRBY MORGAN® PARTS
12 of 2015
Subject:
Misuse/Abuse of Technician Training Certificates
Products Affected:
All Kirby Morgan® Products
6 of 2015
Subject:
This bulletin is to serve as a reminder of an important difference
in installation procedure between the port retainer screws for the
fiberglass helmets verses those of the stainless steel helmets.
14 of 2015
Subject:
P/N 510-754 Head Cushions Change from Zippers to VELCRO® Brand Closures
Products Affected:
510-722 Head Cushion Bag, for Head Cushion 510-754, used in all helmets except the SL 17A/B.
5 of 2015
Subject:
550-232 Sleeves for the sealed pull pins now marked
with groove, effective immediately
Products Affected:
550-232 Pull Pin Sleeve (sold in the 525-112 Sleeve Kits only. Two per kit).
525-112 Pull Pin Sleeve Kit
12 of 2014
Subject:
540-039 Front Stand Offs (×2 per helmet) added to Kirby Morgan Helmets
Products Affected:
All Kirby Morgan Helmets except the SuperLite 17B.
560-074 Bottom Ring, 560-517 Stainless Steel Helmet Shell,
All shells with Bottom Ring Assemblies: 505-105, 505-106, 505-107, 505-108, 505-162.
10 of 2014
Subject:
560-517 Stainless Steel Shells now with “Auxiliary Port”
Products Affected:
KM 77 Helmets, KM 37SS Helmets, KM 97 Helmets: part numbers 500-090,
500-091, 500-100, 500-101, 500-700, 500-701
3 of 2014
Subject:
Maintenance Manuals in New Modular Format on USB Flash Drive
Products Affected:
All Kirby Morgan Helmets & BandMasks®
1 of 2014
Subject:
Unauthorized Sellers / Buyer Beware!
14 of 2014
Subject:
Hard Copy Manuals No Longer Available. USB Flash Drive Manuals now ship with, and are available on our website for All Product Manuals (Modular Format).
Products Affected:
KMACS-5 and EXO® BR.
4 of 2014
Subject:
Cleaning And Brightening Stainless Steel Shells
Products Affected:
Stainless Steel Helmet Shells (P/N 560-517) and Pods (P/Ns 560-556, -516).
4 of 2013
Subject:
Chin Strap Assembly, 505-111 Lengthened
Products Affected:
Helmets affected: SuperLite® 17B, 17C, 27®, KM 37, KM37NS, KM 47, KM 57, KM 77, KM 37SS.
Parts affected: 505-111 Chin Strap Assembly (not sold separately*).
*Sold as:
505-748 Chin Strap Assembly with snaps, SS (order for stainless steel helmets).
525-716 Chin Strap Assembly Kit (order for fiberglass helmets).
All the following Neck Ring Assemblies: 505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-
104, 505-117, 505-118, 505-119, 505-120.
2 of 2013
Subject:
Re. 505-110 Sealed Pull Pins- standard on all Kirby Morgan helmets except
the SL 17B & MK 21
Products Affected:
Kirby Morgan helmets except the SL 17B & MK 21.
1 of 2013
Subject:
Head Cushion Foam Kit P/N 525-746
7 of 2012
Subject:
Pull Pin Sleeve Kit P/N 525-112
6 of 2012
Subject:
P/N 560-300 Zinc Whisker Anodes and P/N 560-304 Zinc Sleeve Anode Installed on All Stainless Steel Helmets
Products Affected:
P/Ns 500-090/091 KM 77 helmets and P/Ns 500-100/101 KM 37SS helmets
4 of 2012
Subject:
New Head Cushion (p/n 510-754), Improved Head Cushion Foam Spacer Kit (HCFS, p/n 525-745) and Improved Chin Cushion (p/n 510-683)
Products Affected:
Kirby Morgan dive helmets SL-17C, SL-27, KM-37, KM-47, KM-57, KM-77, and KM-37SS.
1 of 2011
Subject:
Earphone Speaker, 515-008, is replaced by 515-090 Earphone Speaker
Products Affected:
(No change to these part numbers).
5 of 2011
Subject:
New Product Maintenance & Repair Log Book, P/N 125-001
Products Affected:
All complete Helmets and Masks, including part numbers 300-036, 300-036MS, 300-037, 300-038, 300-038MS, 500-010, 500-011, 500-025, 500-026, 500-028, 500-029, 500-040, 500-041, 500-050, 500-051, 500-050NS, 500-051NS, 500-070, 500-071, 500-080, 500-081, 500-090, 500-091, 500-100, 500-101, 500-117, 500-599, 500-600 and 800-050
4 of 2011
Subject:
Diaphragm Part Number 510-553
Products Affected:
(Possibly) Regulator Diaphragms p/n's 510-553, 500-010, 500-011, 500-040, 500-041, 500-050, 500- 051, 500-100, 500-101, 500-025, 500-026, 500-028, 500-029, 500-599, 500-600, 505-069, 505-069NS, 505-027, 505-026, 525-309, 525-317, 525-319, 525-322, 525-323, 525-325, 525-327, 525-333, 525-341, 525-345, 525-347, 525-349, 525-360, 525-363, 525-365, 525-358, 525-381, 525-382, 525-388, 525-327, 305-175, 325-325 (Shipped January 23rd, 2009 through December 2010).
4 of 2010
Subject:
Head Cushion Foam Spacer Kit (HCFS) Part Number 525-745
3 of 2010
Subject:
New Kits Part Numbers
525-306, 525-307, 525-308, 525-322, 525-323, 525-377, 525-380, 525-381, 525-382.
Products Affected:
Kits 525-368, 525-377, and 525-380
Helmets SL 17C, KM 77, KM 47 and KM37SS.
2 of 2010
Subject:
Anode Kits For KMDSI Helmets And BandMasks®.
Products Affected:
N/A
7 of 2010
Subject:
530-110 Lock Nut Replaces 330-320 Lock Nut
Products Affected:
505-110 Sealed Pull Pin Assembly
1 of 2010
Subject:
Starboard Whisker Wing, P/N 510-786; Port Whisker Wing, P/N 510-787.
Products Affected:
525-216, 525-218, 525-317, 525-319, 525-323, 525-325, 525-327, 525-333, 525-341, 525-347, 525-349, 525-752, 525-755, 525-759, all helmets and BandMasks except the KM-47 and 77.
6 of 2010
Subject:
Length of Part Number 530-024, Screw, Increased
Products Affected:
505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-101,
505-102, 505-104, 505-118, 505-119, 505-120, 505-744, 505-745, 505-746, 505-747, 525-216, 525-230,
525-341, 525-347, 525-349, 525-372 and 525-379.
1 of 2009
Subject:
Kirby Morgan Helmet Retaining Systems
10 of 2009
Subject:
New Product Oral Nasal With Lens Retainer Kit, P/N 525-775 and Lens Retainer Kit, P/N 525-776
Products Affected:
All Kirby Morgan® Helmets Except The KM-47, KM-77 And The MK-21
1 of 2009
Subject:
Communication Module used on Kirby Morgan® Helmets & EXO® Masks P/N 320-025
Products Affected:
305-020, 315-201, 315-206, 315-210, 315-215, 320-023, 320-024, 515-023,
515-024, 520-130, 520-131, 520-132.
8 of 2009
Subject:
New Product Kirby Morgan® 37SS Diving Helmet
1 of 2008
Subject:
Dry Suit Inflation Installation onto a Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
Products Affected:
Dry Suit's with Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
2 of 2008
Subject:
Kirby Morgan® Dive Systems is now shipping all helmets (except the 17B) with a new Pull Strap
assembly that has a 1" Stainless Steel "D" ring sewn on the end to hang the neck ring assembly and
allow proper drying. The length of the Pull Strap remains the same.
Products Affected:
All Helmets except SuperLite® 17B
All neck ring assemblies: 505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-101, 505-102,
505-104, 505-117, 505-118, 505-119, 505-120, 505-744, 505-745, 505-746, 505-747.
Kit:
525-230 Dry Suit Neck Ring Ki
1 of 2008
Subject:
One Way Valve Product Change
Products Affected:
300-145, 300-150, 300-155, 505-024, 505-025,505-060, 505-732, 525-049, 525-330 and all Kirby Morgan® Helmets and BandMask®.
5 of 2007
Subject:
Microphones Now Shipping With Strain Relief Ring & Equalizing Vent
Products Affected:
515-022, 515-029, 315-201, 515-023, 515-033, 515-009, 315-206, 315-017, 515-024 and 515-030
2 of 2006
Subject:
Replacements for Recalled Valves (Reference Safety Notice #1 of 2005)
Products Affected:
One Way Valve (part #555-195)
1 of 2005
Subject:
Defective One Way Valve Recall
Products Affected:
Kirby Morgan® helmets, BandMasks® and replacement parts. KMDSI P/N 555-195 One Way Valve and P/N 505-060 One Way Valve Assembly.
1 of 2002
Subject:
Correct Orientation of Oral Nasal Body P/N 520-020 & Valve P/N 510-550
Products Affected:
All KMDSI Helmets and BandMasks®
1 of 2002
Subject:
Maintenance Inspection Timetable for all KMDSI Helmets and BandMasks®
Products Affected:
All KMDSI helmets and BandMasks®
KM 47 Bulletins
5 of 2019
Subject:
Acceptable Breathing Systems for Kirby Morgan® Helmets and BandMasks®
Products Affected:
All Kirby Morgan® helmets and BandMasks®
4 of 2019
Subject:
Maintenance Inspection Timetable for KMDSI Helmets and BandMasks
Products Affected:
All Kirby Morgan® helmets and BandMasks®
3 of 2019
Subject:
P/N 510-776 Exhaust Valve Color of Material Changed from Clear to Black
Products Affected:
205-025 Regulator Body Assembly, 225-120 Rebuild Kit, Balanced Scuba Regulator, 505-085 Regulator Body Assembly, 505-560 SS Balanced Reg Assy, Superflow 450, 505-725 Tri Valve Assembly, 505-729 Tri Valve Assembly, SL27, 505-730 Quad Valve Exhaust Assembly, 505-758 350 REGULATOR POD ASSEMBLY, 505-776 455 REGULATOR POD ASSEMBLY, 525-217 Soft Goods Overhaul Kit, 57, 525-218 Helmet Spares Kit, 57, 525-356 Kit, Soft Goods, 37/17K/17C/57 w/455 Reg, 525-358 Kit, Soft Goods Overhaul, 18/28, 525-359 Kit, Soft Goods Overhaul, 27 w/455 Reg., 525-360 Kit, Soft Goods Overhaul, 17A/B, 525-363 Kit,Soft Goods Overhaul, K/37/C, 525-364 Soft Goods Kit, KM97, 525-365 Kit, Soft Goods Overhaul, 27, 525-367 Kit, Soft Goods Overhaul 18/28 w/455 Reg, 525-368 Kit, Soft Goods Overhaul, KM 47, 525-370 Helmet Spares Kit, KM 97, 525-377 Kit, Soft Goods Overhaul, KM 77, 525-378 Helmet Spares Kit, KMDH 77, 525-380 Kit, Soft Goods Overhaul, KM 37 S.S., 525-381 Helmet Spares Kit, KM 37 S.S., 525-718 Reg. Rebuild Kit, S.S. Balanced, 525-752 Tri-Valve Exhaust Kit, 525-755 Tri-Valve Exhaust Kit, SL27, 525-763 Conversion Kit, 450 Regulator For SL 27, 525-764 Kit, REX Whisker Exhaust, 525-767 Rebuild Kit, 455 Balanced Regulator
6 of 2018
Subject:
Head Cushion Snaps Material—Changed to Stainless Steel
Products Affected:
510-754 Head Cushion (head cushion of all helmets excluding the SuperLite® 17B), 510-722 Head Cushion Bag (the outer covering of 510-754), All Helmets (excluding the SuperLite® 17B), Spares Kits 525-119, 525-218, 525-250, 525-322, 525-333, 525-341, 525-371, 525-378, 525-381
7 of 2016
Subject:
O-ring Kits & Overseas Spares Kits Are Now Obsolete
O-rings From O-ring Kits Now In Soft Goods Kits Shipping Immediately
Products Affected:
525-019 O-ring Kit, SL 27, 37, 57, 17K, 525-301 O-ring Kit, SL 17B, 525-303 O-ring Kit, 18/28, 525-304 O-ring Kit, KM 97, 525-305 O-ring Kit, SL 17C, 525-306 O-ring Kit, KM 47, 525-307 O-ring Kit, KM 77, 525-308 O-ring Kit, 37SS
9 of 2016
Subject:
Twenty Five Years is the Recommended Service Life for Fiberglass Shells, Frames & Yokes
8 of 2016
Subject:
P/N 525-211 Sealed Pull Pin Overhaul Kit Now for Two Pins
Products Affected:
P/N 525-211 Sealed Pull Pin Overhaul Kit
5 of 2014 (UPDATED March 23, 2016)
Subject:
Unauthorized “Painting” (resurfacing) Helmet Shells & KMB 18 Frames
Serial Number Tampering
Products Affected:
All fiberglass helmets / KMB 18 BandMasks.
5 of 2015
Subject:
550-232 Sleeves for the sealed pull pins now marked
with groove, effective immediately
Products Affected:
550-232 Pull Pin Sleeve (sold in the 525-112 Sleeve Kits only. Two per kit).
525-112 Pull Pin Sleeve Kit
4 of 2015
Subject:
525-769 Conversion Kit, 455 Regulator for KM 77
525-116 Front Standoff Kit
525-395 Conversion Kit, Rex Regulator for 37SS
1 of 2015
Subject:
Notice of False Training Certificates
Products Affected:
All Kirby Morgan® Products
8 of 2015
Subject:
USE OF AFTER MARKET OR NON-GENUINE KIRBY MORGAN® PARTS
12 of 2015
Subject:
Misuse/Abuse of Technician Training Certificates
Products Affected:
All Kirby Morgan® Products
6 of 2015
Subject:
This bulletin is to serve as a reminder of an important difference
in installation procedure between the port retainer screws for the
fiberglass helmets verses those of the stainless steel helmets.
14 of 2015
Subject:
P/N 510-754 Head Cushions Change from Zippers to VELCRO® Brand Closures
Products Affected:
510-722 Head Cushion Bag, for Head Cushion 510-754, used in all helmets except the SL 17A/B.
9 of 2015
Subject:
350-032 Main Tube is Replaced by 350-143 Main Tube
Products Affected:
350-032 Main tube, BR
505-278 REX® Regulator Assembly
305-040 Balanced Regulator Assembly, EXO-BR®.
12 of 2014
Subject:
540-039 Front Stand Offs (×2 per helmet) added to Kirby Morgan Helmets
Products Affected:
All Kirby Morgan Helmets except the SuperLite 17B.
560-074 Bottom Ring, 560-517 Stainless Steel Helmet Shell,
All shells with Bottom Ring Assemblies: 505-105, 505-106, 505-107, 505-108, 505-162.
3 of 2014
Subject:
Maintenance Manuals in New Modular Format on USB Flash Drive
Products Affected:
All Kirby Morgan Helmets & BandMasks®
1 of 2014
Subject:
Unauthorized Sellers / Buyer Beware!
14 of 2014
Subject:
Hard Copy Manuals No Longer Available. USB Flash Drive Manuals now ship with, and are available on our website for All Product Manuals (Modular Format).
Products Affected:
KMACS-5 and EXO® BR.
5 of 2014 (UPDATED March 23, 2016)
Subject:
Unauthorized “Painting” (resurfacing) Helmet Shells & KMB 18 Frames
Serial Number Tampering
Products Affected:
All fiberglass helmets / KMB 18 BandMasks.
2 of 2013
Subject:
Re. 505-110 Sealed Pull Pins- standard on all Kirby Morgan helmets except
the SL 17B & MK 21
Products Affected:
Kirby Morgan helmets except the SL 17B & MK 21.
1 of 2013
Subject:
Head Cushion Foam Kit P/N 525-746
4 of 2013
Subject:
Chin Strap Assembly, 505-111 Lengthened
Products Affected:
Helmets affected: SuperLite® 17B, 17C, 27®, KM 37, KM37NS, KM 47, KM 57, KM 77, KM 37SS.
Parts affected: 505-111 Chin Strap Assembly (not sold separately*).
*Sold as:
505-748 Chin Strap Assembly with snaps, SS (order for stainless steel helmets).
525-716 Chin Strap Assembly Kit (order for fiberglass helmets).
All the following Neck Ring Assemblies: 505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-
104, 505-117, 505-118, 505-119, 505-120.
5 of 2012
Subject:
Washer P/N 530-556 Added to Kit P/N 525-717 KM 37, 47, 57 and 17K Brackets Kit
4 of 2012
Subject:
New Head Cushion (p/n 510-754), Improved Head Cushion Foam Spacer Kit (HCFS, p/n 525-745) and Improved Chin Cushion (p/n 510-683)
Products Affected:
Kirby Morgan dive helmets SL-17C, SL-27, KM-37, KM-47, KM-57, KM-77, and KM-37SS.
7 of 2012
Subject:
Pull Pin Sleeve Kit P/N 525-112
5 of 2011
Subject:
New Product Maintenance & Repair Log Book, P/N 125-001
Products Affected:
All complete Helmets and Masks, including part numbers 300-036, 300-036MS, 300-037, 300-038, 300-038MS, 500-010, 500-011, 500-025, 500-026, 500-028, 500-029, 500-040, 500-041, 500-050, 500-051, 500-050NS, 500-051NS, 500-070, 500-071, 500-080, 500-081, 500-090, 500-091, 500-100, 500-101, 500-117, 500-599, 500-600 and 800-050
4 of 2011
Subject:
Diaphragm Part Number 510-553
Products Affected:
(Possibly) Regulator Diaphragms p/n's 510-553, 500-010, 500-011, 500-040, 500-041, 500-050, 500- 051, 500-100, 500-101, 500-025, 500-026, 500-028, 500-029, 500-599, 500-600, 505-069, 505-069NS, 505-027, 505-026, 525-309, 525-317, 525-319, 525-322, 525-323, 525-325, 525-327, 525-333, 525-341, 525-345, 525-347, 525-349, 525-360, 525-363, 525-365, 525-358, 525-381, 525-382, 525-388, 525-327, 305-175, 325-325 (Shipped January 23rd, 2009 through December 2010).
1 of 2011
Subject:
Earphone Speaker, 515-008, is replaced by 515-090 Earphone Speaker
Products Affected:
(No change to these part numbers).
7 of 2011
Subject:
REX® Regulator Exhaust Valve Part Number 510-777
Products Affected:
KM 47 Helmets 500-070/071, KM 77 Helmets 500-090/091, 505-278, 505-736, 525-377, 525-368
4 of 2010
Subject:
Head Cushion Foam Spacer Kit (HCFS) Part Number 525-745
3 of 2010
Subject:
New Kits Part Numbers
525-306, 525-307, 525-308, 525-322, 525-323, 525-377, 525-380, 525-381, 525-382.
Products Affected:
Kits 525-368, 525-377, and 525-380
Helmets SL 17C, KM 77, KM 47 and KM37SS.
2 of 2010
Subject:
Anode Kits For KMDSI Helmets And BandMasks®.
Products Affected:
N/A
7 of 2010
Subject:
530-110 Lock Nut Replaces 330-320 Lock Nut
Products Affected:
505-110 Sealed Pull Pin Assembly
6 of 2010
Subject:
Length of Part Number 530-024, Screw, Increased
Products Affected:
505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-101,
505-102, 505-104, 505-118, 505-119, 505-120, 505-744, 505-745, 505-746, 505-747, 525-216, 525-230,
525-341, 525-347, 525-349, 525-372 and 525-379.
4 of 2009
Subject:
Pull Strap Assembly Kit P/N 525-770
Products Affected:
P/N 530-808
1 of 2009
Subject:
Kirby Morgan Helmet Retaining Systems
1 of 2009
Subject:
Communication Module used on Kirby Morgan® Helmets & EXO® Masks P/N 320-025
Products Affected:
305-020, 315-201, 315-206, 315-210, 315-215, 320-023, 320-024, 515-023,
515-024, 520-130, 520-131, 520-132.
7 of 2009
Subject:
New Product Tool Kit Pouch P/N 525-613
Products Affected:
P/N 525-620 and P/N 525-768
1 of 2008
Subject:
Dry Suit Inflation Installation onto a Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
Products Affected:
Dry Suit's with Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
2 of 2008
Subject:
Kirby Morgan® Dive Systems is now shipping all helmets (except the 17B) with a new Pull Strap
assembly that has a 1" Stainless Steel "D" ring sewn on the end to hang the neck ring assembly and
allow proper drying. The length of the Pull Strap remains the same.
Products Affected:
All Helmets except SuperLite® 17B
All neck ring assemblies: 505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-101, 505-102,
505-104, 505-117, 505-118, 505-119, 505-120, 505-744, 505-745, 505-746, 505-747.
Kit:
525-230 Dry Suit Neck Ring Ki
1 of 2008
Subject:
One Way Valve Product Change
Products Affected:
300-145, 300-150, 300-155, 505-024, 505-025,505-060, 505-732, 525-049, 525-330 and all Kirby Morgan® Helmets and BandMask®.
6 of 2007
Subject:
New Flex Control Knobs, Part Numbers 520-524 & 520-525
Products Affected:
300-145, 300-150, 300-155, 325-095, 505-024, 505-025, 505-070, 505-071,
505-080, 505-081, 525-049, 525-311 and all Kirby Morgan® Helmets and BandMasks®.
1 of 2007
Subject:
Helmet Shell Repair Caution
Products Affected:
All Kirby Morgan® Helmets and BandMasks®
5 of 2007
Subject:
Microphones Now Shipping With Strain Relief Ring & Equalizing Vent
Products Affected:
515-022, 515-029, 315-201, 515-023, 515-033, 515-009, 315-206, 315-017, 515-024 and 515-030
3 of 2007
Subject:
Longer Waterproof Communications Connector Now Standard
Products Affected:
505-047 Male Waterproof Assembly, 505-065 Male Waterproof Assembly, SL27®, 515-024 Communication Assemble with MWP
2 of 2006
Subject:
Replacements for Recalled Valves (Reference Safety Notice #1 of 2005)
Products Affected:
One Way Valve (part #555-195)
1 of 2006
Subject:
New Air Train Gasket, KMDSI Part #510-762
Products Affected:
SuperLite® and Kirby Morgan® helmets, and BandMask® model KMB 18
12 of 2005
Subject:
New Microphone for Kirby Morgan® Masks and Helmets
Products Affected:
KMDSI Masks, Helmets and all communications sets and assemblies.
1 of 2005
Subject:
Defective One Way Valve Recall
Products Affected:
Kirby Morgan® helmets, BandMasks® and replacement parts. KMDSI P/N 555-195 One Way Valve and P/N 505-060 One Way Valve Assembly.
11 of 2005
Subject:
Hinge Bolt Part #530-027
Products Affected:
Kirby Morgan® Helmets
16 of 2005
Subject:
New Stepped Neck Dam Ring Part# 560-078 and Split Ring Part #540-105
Products Affected:
Kirby Morgan® helmets (with the exception of the SuperLite® 17B)
15 of 2005
Subject:
New Fasteners
Products Affected:
Kirby Morgan® Helmets and Masks Part Numbers 530-035, 530-040, 530-045
1 of 2004
Subject:
Possible damage to emergency valve main body (550-140) between male pipe threads and the "B" side block bodies (550-029) as well as the manifold block body (350-050) at the mating female pipe threads.
Products Affected:
Any Kirby Morgan® helmets or masks incorporating a side block or manifold block, or separate manifold block assembly.
1 of 2002
Subject:
Correct Orientation of Oral Nasal Body P/N 520-020 & Valve P/N 510-550
Products Affected:
All KMDSI Helmets and BandMasks®
1 of 2002
Subject:
Maintenance Inspection Timetable for all KMDSI Helmets and BandMasks®
Products Affected:
All KMDSI helmets and BandMasks®
1 of 2001
Subject:
"Painting" (resurfacing) Helmet Shells & Mask Frames
Products Affected:
All KMDSI Fiberglass Helmet Shells & Fiberglass Mask Frames
KM 57 Bulletins
5 of 2019
Subject:
Acceptable Breathing Systems for Kirby Morgan® Helmets and BandMasks®
Products Affected:
All Kirby Morgan® helmets and BandMasks®
4 of 2019
Subject:
Maintenance Inspection Timetable for KMDSI Helmets and BandMasks
Products Affected:
All Kirby Morgan® helmets and BandMasks®
3 of 2019
Subject:
P/N 510-776 Exhaust Valve Color of Material Changed from Clear to Black
Products Affected:
205-025 Regulator Body Assembly, 225-120 Rebuild Kit, Balanced Scuba Regulator, 505-085 Regulator Body Assembly, 505-560 SS Balanced Reg Assy, Superflow 450, 505-725 Tri Valve Assembly, 505-729 Tri Valve Assembly, SL27, 505-730 Quad Valve Exhaust Assembly, 505-758 350 REGULATOR POD ASSEMBLY, 505-776 455 REGULATOR POD ASSEMBLY, 525-217 Soft Goods Overhaul Kit, 57, 525-218 Helmet Spares Kit, 57, 525-356 Kit, Soft Goods, 37/17K/17C/57 w/455 Reg, 525-358 Kit, Soft Goods Overhaul, 18/28, 525-359 Kit, Soft Goods Overhaul, 27 w/455 Reg., 525-360 Kit, Soft Goods Overhaul, 17A/B, 525-363 Kit,Soft Goods Overhaul, K/37/C, 525-364 Soft Goods Kit, KM97, 525-365 Kit, Soft Goods Overhaul, 27, 525-367 Kit, Soft Goods Overhaul 18/28 w/455 Reg, 525-368 Kit, Soft Goods Overhaul, KM 47, 525-370 Helmet Spares Kit, KM 97, 525-377 Kit, Soft Goods Overhaul, KM 77, 525-378 Helmet Spares Kit, KMDH 77, 525-380 Kit, Soft Goods Overhaul, KM 37 S.S., 525-381 Helmet Spares Kit, KM 37 S.S., 525-718 Reg. Rebuild Kit, S.S. Balanced, 525-752 Tri-Valve Exhaust Kit, 525-755 Tri-Valve Exhaust Kit, SL27, 525-763 Conversion Kit, 450 Regulator For SL 27, 525-764 Kit, REX Whisker Exhaust, 525-767 Rebuild Kit, 455 Balanced Regulator
6 of 2018
Subject:
Head Cushion Snaps Material—Changed to Stainless Steel
Products Affected:
510-754 Head Cushion (head cushion of all helmets excluding the SuperLite® 17B), 510-722 Head Cushion Bag (the outer covering of 510-754), All Helmets (excluding the SuperLite® 17B), Spares Kits 525-119, 525-218, 525-250, 525-322, 525-333, 525-341, 525-371, 525-378, 525-381
7 of 2016
Subject:
O-ring Kits & Overseas Spares Kits Are Now Obsolete
O-rings From O-ring Kits Now In Soft Goods Kits Shipping Immediately
Products Affected:
525-019 O-ring Kit, SL 27, 37, 57, 17K, 525-301 O-ring Kit, SL 17B, 525-303 O-ring Kit, 18/28, 525-304 O-ring Kit, KM 97, 525-305 O-ring Kit, SL 17C, 525-306 O-ring Kit, KM 47, 525-307 O-ring Kit, KM 77, 525-308 O-ring Kit, 37SS
5 of 2016
Subject:
P/N 525-757 Parts Upgrade Kit for 450 Regulator
Products Affected:
KM 57 Helmets 500-080/081, 505-560 SuperFlow® 450 Regulator, 525-763 & 525-766 Conversion Kits
11 of 2016
Subject:
Soft Goods Overhaul Kits for Units with 455 Regulators
Products Affected:
KMB 18 and KMB 28 Band Masks with 455 regulators, SuperLite® 27 Helmet with 455 regulator, SuperLite® 17K Helmet with 455 regulator, SuperLite® 17C Helmet with 455 regulator, Kirby Morgan® 37 Helmet with 455 regulator, Kirby Morgan® 57 Helmet with 455 regulator
10 of 2016
Subject:
KM 57 Helmets P/N 500-080 and 500-081 Discontinued
Products Affected:
Kirby Morgan 57 Helmets, P/N 500-080 & 500-081
9 of 2016
Subject:
Twenty Five Years is the Recommended Service Life for Fiberglass Shells, Frames & Yokes
5 of 2014 (UPDATED March 23, 2016)
Subject:
Unauthorized “Painting” (resurfacing) Helmet Shells & KMB 18 Frames
Serial Number Tampering
Products Affected:
All fiberglass helmets / KMB 18 BandMasks.
8 of 2016
Subject:
P/N 525-211 Sealed Pull Pin Overhaul Kit Now for Two Pins
Products Affected:
P/N 525-211 Sealed Pull Pin Overhaul Kit
14 of 2016
Subject:
The Stability of Whisker Clamps
Products Affected:
All Kirby Morgan Helmets and BandMasks® with Tri or Quad Valve Exhaust Systems, excluding the KM 47 fiberglass helmet and the KM 77 stainless steel helmet.
5 of 2015
Subject:
550-232 Sleeves for the sealed pull pins now marked
with groove, effective immediately
Products Affected:
550-232 Pull Pin Sleeve (sold in the 525-112 Sleeve Kits only. Two per kit).
525-112 Pull Pin Sleeve Kit
4 of 2015
Subject:
525-769 Conversion Kit, 455 Regulator for KM 77
525-116 Front Standoff Kit
525-395 Conversion Kit, Rex Regulator for 37SS
1 of 2015
Subject:
Notice of False Training Certificates
Products Affected:
All Kirby Morgan® Products
8 of 2015
Subject:
USE OF AFTER MARKET OR NON-GENUINE KIRBY MORGAN® PARTS
3 of 2015
Subject:
The 525-765 455 Balanced Regulator Conversion Kit
12 of 2015
Subject:
Misuse/Abuse of Technician Training Certificates
Products Affected:
All Kirby Morgan® Products
6 of 2015
Subject:
This bulletin is to serve as a reminder of an important difference
in installation procedure between the port retainer screws for the
fiberglass helmets verses those of the stainless steel helmets.
14 of 2015
Subject:
P/N 510-754 Head Cushions Change from Zippers to VELCRO® Brand Closures
Products Affected:
510-722 Head Cushion Bag, for Head Cushion 510-754, used in all helmets except the SL 17A/B.
12 of 2014
Subject:
540-039 Front Stand Offs (×2 per helmet) added to Kirby Morgan Helmets
Products Affected:
All Kirby Morgan Helmets except the SuperLite 17B.
560-074 Bottom Ring, 560-517 Stainless Steel Helmet Shell,
All shells with Bottom Ring Assemblies: 505-105, 505-106, 505-107, 505-108, 505-162.
3 of 2014
Subject:
Maintenance Manuals in New Modular Format on USB Flash Drive
Products Affected:
All Kirby Morgan Helmets & BandMasks®
1 of 2014
Subject:
Unauthorized Sellers / Buyer Beware!
14 of 2014
Subject:
Hard Copy Manuals No Longer Available. USB Flash Drive Manuals now ship with, and are available on our website for All Product Manuals (Modular Format).
Products Affected:
KMACS-5 and EXO® BR.
5 of 2014 (UPDATED March 23, 2016)
Subject:
Unauthorized “Painting” (resurfacing) Helmet Shells & KMB 18 Frames
Serial Number Tampering
Products Affected:
All fiberglass helmets / KMB 18 BandMasks.
2 of 2013
Subject:
Re. 505-110 Sealed Pull Pins- standard on all Kirby Morgan helmets except
the SL 17B & MK 21
Products Affected:
Kirby Morgan helmets except the SL 17B & MK 21.
1 of 2013
Subject:
Head Cushion Foam Kit P/N 525-746
4 of 2013
Subject:
Chin Strap Assembly, 505-111 Lengthened
Products Affected:
Helmets affected: SuperLite® 17B, 17C, 27®, KM 37, KM37NS, KM 47, KM 57, KM 77, KM 37SS.
Parts affected: 505-111 Chin Strap Assembly (not sold separately*).
*Sold as:
505-748 Chin Strap Assembly with snaps, SS (order for stainless steel helmets).
525-716 Chin Strap Assembly Kit (order for fiberglass helmets).
All the following Neck Ring Assemblies: 505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-
104, 505-117, 505-118, 505-119, 505-120.
5 of 2012
Subject:
Washer P/N 530-556 Added to Kit P/N 525-717 KM 37, 47, 57 and 17K Brackets Kit
4 of 2012
Subject:
New Head Cushion (p/n 510-754), Improved Head Cushion Foam Spacer Kit (HCFS, p/n 525-745) and Improved Chin Cushion (p/n 510-683)
Products Affected:
Kirby Morgan dive helmets SL-17C, SL-27, KM-37, KM-47, KM-57, KM-77, and KM-37SS.
7 of 2012
Subject:
Pull Pin Sleeve Kit P/N 525-112
5 of 2011
Subject:
New Product Maintenance & Repair Log Book, P/N 125-001
Products Affected:
All complete Helmets and Masks, including part numbers 300-036, 300-036MS, 300-037, 300-038, 300-038MS, 500-010, 500-011, 500-025, 500-026, 500-028, 500-029, 500-040, 500-041, 500-050, 500-051, 500-050NS, 500-051NS, 500-070, 500-071, 500-080, 500-081, 500-090, 500-091, 500-100, 500-101, 500-117, 500-599, 500-600 and 800-050
1 of 2011
Subject:
Earphone Speaker, 515-008, is replaced by 515-090 Earphone Speaker
Products Affected:
(No change to these part numbers).
4 of 2010
Subject:
Head Cushion Foam Spacer Kit (HCFS) Part Number 525-745
2 of 2010
Subject:
Anode Kits For KMDSI Helmets And BandMasks®.
Products Affected:
N/A
7 of 2010
Subject:
530-110 Lock Nut Replaces 330-320 Lock Nut
Products Affected:
505-110 Sealed Pull Pin Assembly
1 of 2010
Subject:
Starboard Whisker Wing, P/N 510-786; Port Whisker Wing, P/N 510-787.
Products Affected:
525-216, 525-218, 525-317, 525-319, 525-323, 525-325, 525-327, 525-333, 525-341, 525-347, 525-349, 525-752, 525-755, 525-759, all helmets and BandMasks except the KM-47 and 77.
6 of 2010
Subject:
Length of Part Number 530-024, Screw, Increased
Products Affected:
505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-101,
505-102, 505-104, 505-118, 505-119, 505-120, 505-744, 505-745, 505-746, 505-747, 525-216, 525-230,
525-341, 525-347, 525-349, 525-372 and 525-379.
1 of 2009
Subject:
Kirby Morgan Helmet Retaining Systems
10 of 2009
Subject:
New Product Oral Nasal With Lens Retainer Kit, P/N 525-775 and Lens Retainer Kit, P/N 525-776
Products Affected:
All Kirby Morgan® Helmets Except The KM-47, KM-77 And The MK-21
1 of 2009
Subject:
Communication Module used on Kirby Morgan® Helmets & EXO® Masks P/N 320-025
Products Affected:
305-020, 315-201, 315-206, 315-210, 315-215, 320-023, 320-024, 515-023,
515-024, 520-130, 520-131, 520-132.
9 of 2009
Subject:
New Product Oral Nasal Mask P/N 510-747
Products Affected:
P/N 510-690 Oral Nasal
3 of 2009
Subject:
P/N 220-050 Inlet Valve
Products Affected:
220-050, 205-015, 505-561, 525-217 and 525-718
1 of 2008
Subject:
Dry Suit Inflation Installation onto a Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
Products Affected:
Dry Suit's with Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
2 of 2008
Subject:
Kirby Morgan® Dive Systems is now shipping all helmets (except the 17B) with a new Pull Strap
assembly that has a 1" Stainless Steel "D" ring sewn on the end to hang the neck ring assembly and
allow proper drying. The length of the Pull Strap remains the same.
Products Affected:
All Helmets except SuperLite® 17B
All neck ring assemblies: 505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-101, 505-102,
505-104, 505-117, 505-118, 505-119, 505-120, 505-744, 505-745, 505-746, 505-747.
Kit:
525-230 Dry Suit Neck Ring Ki
1 of 2008
Subject:
One Way Valve Product Change
Products Affected:
300-145, 300-150, 300-155, 505-024, 505-025,505-060, 505-732, 525-049, 525-330 and all Kirby Morgan® Helmets and BandMask®.
6 of 2007
Subject:
New Flex Control Knobs, Part Numbers 520-524 & 520-525
Products Affected:
300-145, 300-150, 300-155, 325-095, 505-024, 505-025, 505-070, 505-071,
505-080, 505-081, 525-049, 525-311 and all Kirby Morgan® Helmets and BandMasks®.
1 of 2007
Subject:
Helmet Shell Repair Caution
Products Affected:
All Kirby Morgan® Helmets and BandMasks®
5 of 2007
Subject:
Microphones Now Shipping With Strain Relief Ring & Equalizing Vent
Products Affected:
515-022, 515-029, 315-201, 515-023, 515-033, 515-009, 315-206, 315-017, 515-024 and 515-030
3 of 2007
Subject:
Longer Waterproof Communications Connector Now Standard
Products Affected:
505-047 Male Waterproof Assembly, 505-065 Male Waterproof Assembly, SL27®, 515-024 Communication Assemble with MWP
7 of 2006
Subject:
Helmet Sealed Pull Pins (Part #505-110) No Longer Marked with an “S”
Products Affected:
All new Kirby Morgan® helmets that utilize the locking collar design
5 of 2006
Subject:
Whisker Clamp Replacement Kit # 525-032
Products Affected:
KMDSI Tri/Quad valve assemblies P/N’s 525-752, 525-755 & 525-759
2 of 2006
Subject:
Replacements for Recalled Valves (Reference Safety Notice #1 of 2005)
Products Affected:
One Way Valve (part #555-195)
1 of 2006
Subject:
New Air Train Gasket, KMDSI Part #510-762
Products Affected:
SuperLite® and Kirby Morgan® helmets, and BandMask® model KMB 18
12 of 2005
Subject:
New Microphone for Kirby Morgan® Masks and Helmets
Products Affected:
KMDSI Masks, Helmets and all communications sets and assemblies.
1 of 2005
Subject:
Defective One Way Valve Recall
Products Affected:
Kirby Morgan® helmets, BandMasks® and replacement parts. KMDSI P/N 555-195 One Way Valve and P/N 505-060 One Way Valve Assembly.
11 of 2005
Subject:
Hinge Bolt Part #530-027
Products Affected:
Kirby Morgan® Helmets
16 of 2005
Subject:
New Stepped Neck Dam Ring Part# 560-078 and Split Ring Part #540-105
Products Affected:
Kirby Morgan® helmets (with the exception of the SuperLite® 17B)
15 of 2005
Subject:
New Fasteners
Products Affected:
Kirby Morgan® Helmets and Masks Part Numbers 530-035, 530-040, 530-045
1 of 2004
Subject:
Possible damage to emergency valve main body (550-140) between male pipe threads and the "B" side block bodies (550-029) as well as the manifold block body (350-050) at the mating female pipe threads.
Products Affected:
Any Kirby Morgan® helmets or masks incorporating a side block or manifold block, or separate manifold block assembly.
3 of 2004
Subject:
Quad Valve™ Exhaust (KMDSI Part #525-759)
Products Affected:
All Kirby Morgan® SuperLite® Helmets and KM 37/57
1 of 2002
Subject:
Correct Orientation of Oral Nasal Body P/N 520-020 & Valve P/N 510-550
Products Affected:
All KMDSI Helmets and BandMasks®
1 of 2002
Subject:
Maintenance Inspection Timetable for all KMDSI Helmets and BandMasks®
Products Affected:
All KMDSI helmets and BandMasks®
1 of 2001
Subject:
"Painting" (resurfacing) Helmet Shells & Mask Frames
Products Affected:
All KMDSI Fiberglass Helmet Shells & Fiberglass Mask Frames
KM 77 Bulletins
5 of 2019
Subject:
Acceptable Breathing Systems for Kirby Morgan® Helmets and BandMasks®
Products Affected:
All Kirby Morgan® helmets and BandMasks®
4 of 2019
Subject:
Maintenance Inspection Timetable for KMDSI Helmets and BandMasks
Products Affected:
All Kirby Morgan® helmets and BandMasks®
3 of 2019
Subject:
P/N 510-776 Exhaust Valve Color of Material Changed from Clear to Black
Products Affected:
205-025 Regulator Body Assembly, 225-120 Rebuild Kit, Balanced Scuba Regulator, 505-085 Regulator Body Assembly, 505-560 SS Balanced Reg Assy, Superflow 450, 505-725 Tri Valve Assembly, 505-729 Tri Valve Assembly, SL27, 505-730 Quad Valve Exhaust Assembly, 505-758 350 REGULATOR POD ASSEMBLY, 505-776 455 REGULATOR POD ASSEMBLY, 525-217 Soft Goods Overhaul Kit, 57, 525-218 Helmet Spares Kit, 57, 525-356 Kit, Soft Goods, 37/17K/17C/57 w/455 Reg, 525-358 Kit, Soft Goods Overhaul, 18/28, 525-359 Kit, Soft Goods Overhaul, 27 w/455 Reg., 525-360 Kit, Soft Goods Overhaul, 17A/B, 525-363 Kit,Soft Goods Overhaul, K/37/C, 525-364 Soft Goods Kit, KM97, 525-365 Kit, Soft Goods Overhaul, 27, 525-367 Kit, Soft Goods Overhaul 18/28 w/455 Reg, 525-368 Kit, Soft Goods Overhaul, KM 47, 525-370 Helmet Spares Kit, KM 97, 525-377 Kit, Soft Goods Overhaul, KM 77, 525-378 Helmet Spares Kit, KMDH 77, 525-380 Kit, Soft Goods Overhaul, KM 37 S.S., 525-381 Helmet Spares Kit, KM 37 S.S., 525-718 Reg. Rebuild Kit, S.S. Balanced, 525-752 Tri-Valve Exhaust Kit, 525-755 Tri-Valve Exhaust Kit, SL27, 525-763 Conversion Kit, 450 Regulator For SL 27, 525-764 Kit, REX Whisker Exhaust, 525-767 Rebuild Kit, 455 Balanced Regulator
6 of 2018
Subject:
Head Cushion Snaps Material—Changed to Stainless Steel
Products Affected:
510-754 Head Cushion (head cushion of all helmets excluding the SuperLite® 17B), 510-722 Head Cushion Bag (the outer covering of 510-754), All Helmets (excluding the SuperLite® 17B), Spares Kits 525-119, 525-218, 525-250, 525-322, 525-333, 525-341, 525-371, 525-378, 525-381
12 of 2016
Subject:
Update: Cleaning & Protection Products for “Rust & Rust Spots” on Stainless Steel Helmet Shells
Products Affected:
Kirby Morgan® 77 Helmet, Kirby Morgan® 37SS Helmet, Kirby Morgan® 97 Helmet
6 of 2016
Subject:
560-540 Stainless Steel Side Block Body / Low Pressure Ports
Products Affected:
560-540 Stainless Steel Side Block Body, 505-732 Stainless Steel Side Block Assembly,
KM 77 Helmets 500-090/-091, KM 37SS Helmet 500-100/-101, KM 97 Helmets 500-700/-701.
8 of 2016
Subject:
P/N 525-211 Sealed Pull Pin Overhaul Kit Now for Two Pins
Products Affected:
P/N 525-211 Sealed Pull Pin Overhaul Kit
7 of 2016
Subject:
O-ring Kits & Overseas Spares Kits Are Now Obsolete
O-rings From O-ring Kits Now In Soft Goods Kits Shipping Immediately
Products Affected:
525-019 O-ring Kit, SL 27, 37, 57, 17K, 525-301 O-ring Kit, SL 17B, 525-303 O-ring Kit, 18/28, 525-304 O-ring Kit, KM 97, 525-305 O-ring Kit, SL 17C, 525-306 O-ring Kit, KM 47, 525-307 O-ring Kit, KM 77, 525-308 O-ring Kit, 37SS
4 of 2015
Subject:
525-769 Conversion Kit, 455 Regulator for KM 77
525-116 Front Standoff Kit
525-395 Conversion Kit, Rex Regulator for 37SS
1 of 2015
Subject:
Notice of False Training Certificates
Products Affected:
All Kirby Morgan® Products
8 of 2015
Subject:
USE OF AFTER MARKET OR NON-GENUINE KIRBY MORGAN® PARTS
12 of 2015
Subject:
Misuse/Abuse of Technician Training Certificates
Products Affected:
All Kirby Morgan® Products
6 of 2015
Subject:
This bulletin is to serve as a reminder of an important difference
in installation procedure between the port retainer screws for the
fiberglass helmets verses those of the stainless steel helmets.
14 of 2015
Subject:
P/N 510-754 Head Cushions Change from Zippers to VELCRO® Brand Closures
Products Affected:
510-722 Head Cushion Bag, for Head Cushion 510-754, used in all helmets except the SL 17A/B.
9 of 2015
Subject:
350-032 Main Tube is Replaced by 350-143 Main Tube
Products Affected:
350-032 Main tube, BR
505-278 REX® Regulator Assembly
305-040 Balanced Regulator Assembly, EXO-BR®.
5 of 2015
Subject:
550-232 Sleeves for the sealed pull pins now marked
with groove, effective immediately
Products Affected:
550-232 Pull Pin Sleeve (sold in the 525-112 Sleeve Kits only. Two per kit).
525-112 Pull Pin Sleeve Kit
12 of 2014
Subject:
540-039 Front Stand Offs (×2 per helmet) added to Kirby Morgan Helmets
Products Affected:
All Kirby Morgan Helmets except the SuperLite 17B.
560-074 Bottom Ring, 560-517 Stainless Steel Helmet Shell,
All shells with Bottom Ring Assemblies: 505-105, 505-106, 505-107, 505-108, 505-162.
3 of 2014
Subject:
Maintenance Manuals in New Modular Format on USB Flash Drive
Products Affected:
All Kirby Morgan Helmets & BandMasks®
10 of 2014
Subject:
560-517 Stainless Steel Shells now with “Auxiliary Port”
Products Affected:
KM 77 Helmets, KM 37SS Helmets, KM 97 Helmets: part numbers 500-090,
500-091, 500-100, 500-101, 500-700, 500-701
1 of 2014
Subject:
Unauthorized Sellers / Buyer Beware!
14 of 2014
Subject:
Hard Copy Manuals No Longer Available. USB Flash Drive Manuals now ship with, and are available on our website for All Product Manuals (Modular Format).
Products Affected:
KMACS-5 and EXO® BR.
4 of 2014
Subject:
Cleaning And Brightening Stainless Steel Shells
Products Affected:
Stainless Steel Helmet Shells (P/N 560-517) and Pods (P/Ns 560-556, -516).
4 of 2013
Subject:
Chin Strap Assembly, 505-111 Lengthened
Products Affected:
Helmets affected: SuperLite® 17B, 17C, 27®, KM 37, KM37NS, KM 47, KM 57, KM 77, KM 37SS.
Parts affected: 505-111 Chin Strap Assembly (not sold separately*).
*Sold as:
505-748 Chin Strap Assembly with snaps, SS (order for stainless steel helmets).
525-716 Chin Strap Assembly Kit (order for fiberglass helmets).
All the following Neck Ring Assemblies: 505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-
104, 505-117, 505-118, 505-119, 505-120.
2 of 2013
Subject:
Re. 505-110 Sealed Pull Pins- standard on all Kirby Morgan helmets except
the SL 17B & MK 21
Products Affected:
Kirby Morgan helmets except the SL 17B & MK 21.
1 of 2013
Subject:
Head Cushion Foam Kit P/N 525-746
6 of 2012
Subject:
P/N 560-300 Zinc Whisker Anodes and P/N 560-304 Zinc Sleeve Anode Installed on All Stainless Steel Helmets
Products Affected:
P/Ns 500-090/091 KM 77 helmets and P/Ns 500-100/101 KM 37SS helmets
4 of 2012
Subject:
New Head Cushion (p/n 510-754), Improved Head Cushion Foam Spacer Kit (HCFS, p/n 525-745) and Improved Chin Cushion (p/n 510-683)
Products Affected:
Kirby Morgan dive helmets SL-17C, SL-27, KM-37, KM-47, KM-57, KM-77, and KM-37SS.
7 of 2012
Subject:
Pull Pin Sleeve Kit P/N 525-112
5 of 2011
Subject:
New Product Maintenance & Repair Log Book, P/N 125-001
Products Affected:
All complete Helmets and Masks, including part numbers 300-036, 300-036MS, 300-037, 300-038, 300-038MS, 500-010, 500-011, 500-025, 500-026, 500-028, 500-029, 500-040, 500-041, 500-050, 500-051, 500-050NS, 500-051NS, 500-070, 500-071, 500-080, 500-081, 500-090, 500-091, 500-100, 500-101, 500-117, 500-599, 500-600 and 800-050
4 of 2011
Subject:
Diaphragm Part Number 510-553
Products Affected:
(Possibly) Regulator Diaphragms p/n's 510-553, 500-010, 500-011, 500-040, 500-041, 500-050, 500- 051, 500-100, 500-101, 500-025, 500-026, 500-028, 500-029, 500-599, 500-600, 505-069, 505-069NS, 505-027, 505-026, 525-309, 525-317, 525-319, 525-322, 525-323, 525-325, 525-327, 525-333, 525-341, 525-345, 525-347, 525-349, 525-360, 525-363, 525-365, 525-358, 525-381, 525-382, 525-388, 525-327, 305-175, 325-325 (Shipped January 23rd, 2009 through December 2010).
1 of 2011
Subject:
Earphone Speaker, 515-008, is replaced by 515-090 Earphone Speaker
Products Affected:
(No change to these part numbers).
4 of 2010
Subject:
Head Cushion Foam Spacer Kit (HCFS) Part Number 525-745
3 of 2010
Subject:
New Kits Part Numbers
525-306, 525-307, 525-308, 525-322, 525-323, 525-377, 525-380, 525-381, 525-382.
Products Affected:
Kits 525-368, 525-377, and 525-380
Helmets SL 17C, KM 77, KM 47 and KM37SS.
2 of 2010
Subject:
Anode Kits For KMDSI Helmets And BandMasks®.
Products Affected:
N/A
7 of 2010
Subject:
530-110 Lock Nut Replaces 330-320 Lock Nut
Products Affected:
505-110 Sealed Pull Pin Assembly
6 of 2010
Subject:
Length of Part Number 530-024, Screw, Increased
Products Affected:
505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-101,
505-102, 505-104, 505-118, 505-119, 505-120, 505-744, 505-745, 505-746, 505-747, 525-216, 525-230,
525-341, 525-347, 525-349, 525-372 and 525-379.
4 of 2009
Subject:
Pull Strap Assembly Kit P/N 525-770
Products Affected:
P/N 530-808
1 of 2009
Subject:
Kirby Morgan Helmet Retaining Systems
1 of 2009
Subject:
Communication Module used on Kirby Morgan® Helmets & EXO® Masks P/N 320-025
Products Affected:
305-020, 315-201, 315-206, 315-210, 315-215, 320-023, 320-024, 515-023,
515-024, 520-130, 520-131, 520-132.
7 of 2009
Subject:
New Product Tool Kit Pouch P/N 525-613
Products Affected:
P/N 525-620 and P/N 525-768
2 of 2008
Subject:
Kirby Morgan® Dive Systems is now shipping all helmets (except the 17B) with a new Pull Strap
assembly that has a 1" Stainless Steel "D" ring sewn on the end to hang the neck ring assembly and
allow proper drying. The length of the Pull Strap remains the same.
Products Affected:
All Helmets except SuperLite® 17B
All neck ring assemblies: 505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-101, 505-102,
505-104, 505-117, 505-118, 505-119, 505-120, 505-744, 505-745, 505-746, 505-747.
Kit:
525-230 Dry Suit Neck Ring Ki
1 of 2008
Subject:
One Way Valve Product Change
Products Affected:
300-145, 300-150, 300-155, 505-024, 505-025,505-060, 505-732, 525-049, 525-330 and all Kirby Morgan® Helmets and BandMask®.
1 of 2008
Subject:
Dry Suit Inflation Installation onto a Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
Products Affected:
Dry Suit's with Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
5 of 2007
Subject:
Microphones Now Shipping With Strain Relief Ring & Equalizing Vent
Products Affected:
515-022, 515-029, 315-201, 515-023, 515-033, 515-009, 315-206, 315-017, 515-024 and 515-030
3 of 2007
Subject:
Longer Waterproof Communications Connector Now Standard
Products Affected:
505-047 Male Waterproof Assembly, 505-065 Male Waterproof Assembly, SL27®, 515-024 Communication Assemble with MWP
6 of 2007
Subject:
New Flex Control Knobs, Part Numbers 520-524 & 520-525
Products Affected:
300-145, 300-150, 300-155, 325-095, 505-024, 505-025, 505-070, 505-071,
505-080, 505-081, 525-049, 525-311 and all Kirby Morgan® Helmets and BandMasks®.
2 of 2006
Subject:
Replacements for Recalled Valves (Reference Safety Notice #1 of 2005)
Products Affected:
One Way Valve (part #555-195)
1 of 2005
Subject:
Defective One Way Valve Recall
Products Affected:
Kirby Morgan® helmets, BandMasks® and replacement parts. KMDSI P/N 555-195 One Way Valve and P/N 505-060 One Way Valve Assembly.
1 of 2004
Subject:
Possible damage to emergency valve main body (550-140) between male pipe threads and the "B" side block bodies (550-029) as well as the manifold block body (350-050) at the mating female pipe threads.
Products Affected:
Any Kirby Morgan® helmets or masks incorporating a side block or manifold block, or separate manifold block assembly.
1 of 2002
Subject:
Correct Orientation of Oral Nasal Body P/N 520-020 & Valve P/N 510-550
Products Affected:
All KMDSI Helmets and BandMasks®
1 of 2002
Subject:
Maintenance Inspection Timetable for all KMDSI Helmets and BandMasks®
Products Affected:
All KMDSI helmets and BandMasks®
KM 97 Bulletins
5 of 2019
Subject:
Acceptable Breathing Systems for Kirby Morgan® Helmets and BandMasks®
Products Affected:
All Kirby Morgan® helmets and BandMasks®
4 of 2019
Subject:
Maintenance Inspection Timetable for KMDSI Helmets and BandMasks
Products Affected:
All Kirby Morgan® helmets and BandMasks®
3 of 2019
Subject:
P/N 510-776 Exhaust Valve Color of Material Changed from Clear to Black
Products Affected:
205-025 Regulator Body Assembly, 225-120 Rebuild Kit, Balanced Scuba Regulator, 505-085 Regulator Body Assembly, 505-560 SS Balanced Reg Assy, Superflow 450, 505-725 Tri Valve Assembly, 505-729 Tri Valve Assembly, SL27, 505-730 Quad Valve Exhaust Assembly, 505-758 350 REGULATOR POD ASSEMBLY, 505-776 455 REGULATOR POD ASSEMBLY, 525-217 Soft Goods Overhaul Kit, 57, 525-218 Helmet Spares Kit, 57, 525-356 Kit, Soft Goods, 37/17K/17C/57 w/455 Reg, 525-358 Kit, Soft Goods Overhaul, 18/28, 525-359 Kit, Soft Goods Overhaul, 27 w/455 Reg., 525-360 Kit, Soft Goods Overhaul, 17A/B, 525-363 Kit,Soft Goods Overhaul, K/37/C, 525-364 Soft Goods Kit, KM97, 525-365 Kit, Soft Goods Overhaul, 27, 525-367 Kit, Soft Goods Overhaul 18/28 w/455 Reg, 525-368 Kit, Soft Goods Overhaul, KM 47, 525-370 Helmet Spares Kit, KM 97, 525-377 Kit, Soft Goods Overhaul, KM 77, 525-378 Helmet Spares Kit, KMDH 77, 525-380 Kit, Soft Goods Overhaul, KM 37 S.S., 525-381 Helmet Spares Kit, KM 37 S.S., 525-718 Reg. Rebuild Kit, S.S. Balanced, 525-752 Tri-Valve Exhaust Kit, 525-755 Tri-Valve Exhaust Kit, SL27, 525-763 Conversion Kit, 450 Regulator For SL 27, 525-764 Kit, REX Whisker Exhaust, 525-767 Rebuild Kit, 455 Balanced Regulator
8 of 2018
Subject:
Water Shroud Kit for the Kirby Morgan® 97 Part #525-761
Products Affected:
Kirby Morgan® 97
6 of 2018
Subject:
Head Cushion Snaps Material—Changed to Stainless Steel
Products Affected:
510-754 Head Cushion (head cushion of all helmets excluding the SuperLite® 17B), 510-722 Head Cushion Bag (the outer covering of 510-754), All Helmets (excluding the SuperLite® 17B), Spares Kits 525-119, 525-218, 525-250, 525-322, 525-333, 525-341, 525-371, 525-378, 525-381
6 of 2016
Subject:
560-540 Stainless Steel Side Block Body / Low Pressure Ports
Products Affected:
560-540 Stainless Steel Side Block Body, 505-732 Stainless Steel Side Block Assembly,
KM 77 Helmets 500-090/-091, KM 37SS Helmet 500-100/-101, KM 97 Helmets 500-700/-701.
8 of 2016
Subject:
P/N 525-211 Sealed Pull Pin Overhaul Kit Now for Two Pins
Products Affected:
P/N 525-211 Sealed Pull Pin Overhaul Kit
14 of 2016
Subject:
The Stability of Whisker Clamps
Products Affected:
All Kirby Morgan Helmets and BandMasks® with Tri or Quad Valve Exhaust Systems, excluding the KM 47 fiberglass helmet and the KM 77 stainless steel helmet.
7 of 2016
Subject:
O-ring Kits & Overseas Spares Kits Are Now Obsolete
O-rings From O-ring Kits Now In Soft Goods Kits Shipping Immediately
Products Affected:
525-019 O-ring Kit, SL 27, 37, 57, 17K, 525-301 O-ring Kit, SL 17B, 525-303 O-ring Kit, 18/28, 525-304 O-ring Kit, KM 97, 525-305 O-ring Kit, SL 17C, 525-306 O-ring Kit, KM 47, 525-307 O-ring Kit, KM 77, 525-308 O-ring Kit, 37SS
12 of 2016
Subject:
Update: Cleaning & Protection Products for “Rust & Rust Spots” on Stainless Steel Helmet Shells
Products Affected:
Kirby Morgan® 77 Helmet, Kirby Morgan® 37SS Helmet, Kirby Morgan® 97 Helmet
4 of 2015
Subject:
525-769 Conversion Kit, 455 Regulator for KM 77
525-116 Front Standoff Kit
525-395 Conversion Kit, Rex Regulator for 37SS
1 of 2015
Subject:
Notice of False Training Certificates
Products Affected:
All Kirby Morgan® Products
8 of 2015
Subject:
USE OF AFTER MARKET OR NON-GENUINE KIRBY MORGAN® PARTS
3 of 2015
Subject:
The 525-765 455 Balanced Regulator Conversion Kit
12 of 2015
Subject:
Misuse/Abuse of Technician Training Certificates
Products Affected:
All Kirby Morgan® Products
6 of 2015
Subject:
This bulletin is to serve as a reminder of an important difference
in installation procedure between the port retainer screws for the
fiberglass helmets verses those of the stainless steel helmets.
14 of 2015
Subject:
P/N 510-754 Head Cushions Change from Zippers to VELCRO® Brand Closures
Products Affected:
510-722 Head Cushion Bag, for Head Cushion 510-754, used in all helmets except the SL 17A/B.
5 of 2015
Subject:
550-232 Sleeves for the sealed pull pins now marked
with groove, effective immediately
Products Affected:
550-232 Pull Pin Sleeve (sold in the 525-112 Sleeve Kits only. Two per kit).
525-112 Pull Pin Sleeve Kit
3 of 2014
Subject:
Maintenance Manuals in New Modular Format on USB Flash Drive
Products Affected:
All Kirby Morgan Helmets & BandMasks®
10 of 2014
Subject:
560-517 Stainless Steel Shells now with “Auxiliary Port”
Products Affected:
KM 77 Helmets, KM 37SS Helmets, KM 97 Helmets: part numbers 500-090,
500-091, 500-100, 500-101, 500-700, 500-701
8 of 2014
Subject:
New Kits, Part Numbers 225-120, 525-304, 525-328, 525-364,
525-370, 525-630 and 525-767
1 of 2014
Subject:
Unauthorized Sellers / Buyer Beware!
14 of 2014
Subject:
Hard Copy Manuals No Longer Available. USB Flash Drive Manuals now ship with, and are available on our website for All Product Manuals (Modular Format).
Products Affected:
KMACS-5 and EXO® BR.
4 of 2014
Subject:
Cleaning And Brightening Stainless Steel Shells
Products Affected:
Stainless Steel Helmet Shells (P/N 560-517) and Pods (P/Ns 560-556, -516).
12 of 2014
Subject:
540-039 Front Stand Offs (×2 per helmet) added to Kirby Morgan Helmets
Products Affected:
All Kirby Morgan Helmets except the SuperLite 17B.
560-074 Bottom Ring, 560-517 Stainless Steel Helmet Shell,
All shells with Bottom Ring Assemblies: 505-105, 505-106, 505-107, 505-108, 505-162.
5 of 2013
Subject:
Kirby Morgan® 97 Helmet, P/N 500-700 and 500-701
M-48 Mod-1 Bulletins
1 of 2019
Subject:
Part #825-070 MOD-1 Hood with Bib Kit S/M & Part #825-075 MOD-1 Hood with Bib Kit L/XL
Products Affected:
805-175 M-48 MOD-1
3 of 2017
Subject:
250-029 Balance Piston Replaced / 550-549 Balance Spacer Color Change/ New 250-065 Washer Required (Scuba Only)
Products Affected:
200-120 Balanced Scuba Regulator Assembly, 200-125 Balanced Scuba Regulator, Assembly M-48 SuperMask/M-48 MOD-1, 200-130 Scuba Pod Assembly with Balanced Scuba Regulator, 200-150 1st Stage w/Balanced 2nd Stage Scuba Regulator Assembly, 505-455 455 Balanced Regulator, 505-776 455 Pod Assembly, 525-765 Conversion Kit 455 Reg. for 350/450 Reg., 500-700/701 KM 97 Helmet Regulator, the 455, Plus all helmets and Band Masks that are ordered with the 455 regulator
1 of 2016
Subject:
Change to configurations offered & Rebreather Description.
“800 series” M-48 SuperMasks® & MOD-1 Full Face Masks now “805 series.”
Products Affected:
800-048 M-48 SuperMask®, with POD, No Regulator
800-050 M-48 SuperMask®, with POD & Regulator
800-150 M-48 MOD-1, with POD, No Regulator
800-151 M-48 MOD-1, with POD & Regulator
12 of 2015
Subject:
Misuse/Abuse of Technician Training Certificates
Products Affected:
All Kirby Morgan® Products
13 of 2015
Subject:
M-48 MOD-1 Full Face Mask: New Mask Skirt, P/N 810-017
Products Affected:
M-48 Mod-1 Mask, with or without POD (P/Ns 800-150, 800-151, 805-175)
1 of 2015
Subject:
Notice of False Training Certificates
Products Affected:
All Kirby Morgan® Products
8 of 2015
Subject:
USE OF AFTER MARKET OR NON-GENUINE KIRBY MORGAN® PARTS
9 of 2014
Subject:
Regarding Second Stages Used with
M-48 SuperMask® (P/N 800-048) and M-48 MOD 1 (P/N 800-150)
2 of 2014
Subject:
Balanced 2nd Stage SCUBA Regulator
Products Affected:
800-151 M48 MOD 1 Mask with Regulator
800-050 M48 SuperMask® with Regulator
6 of 2014
Subject:
M48 Full Face Masks without Pods now Ship
with Straps & Strap Keepers
Products Affected:
Masks affected: 805-010C (clear sides) M48 SuperMask, Mask Only(No Pod).
805-010 (black sides) M48 SuperMask, Mask Only(No Pod).
805-175 M48 MOD 1 Mask, Mask Only, (No Pod).
1 of 2014
Subject:
Unauthorized Sellers / Buyer Beware!
1 of 2012
Subject:
M-48 Mod 1 Mask, P/N 800-150 and 800-151
Products Affected:
(No change to these part numbers).
5 of 2011
Subject:
New Product Maintenance & Repair Log Book, P/N 125-001
Products Affected:
All complete Helmets and Masks, including part numbers 300-036, 300-036MS, 300-037, 300-038, 300-038MS, 500-010, 500-011, 500-025, 500-026, 500-028, 500-029, 500-040, 500-041, 500-050, 500-051, 500-050NS, 500-051NS, 500-070, 500-071, 500-080, 500-081, 500-090, 500-091, 500-100, 500-101, 500-117, 500-599, 500-600 and 800-050
M-48 SuperMask Bulletins
3 of 2017
Subject:
250-029 Balance Piston Replaced / 550-549 Balance Spacer Color Change/ New 250-065 Washer Required (Scuba Only)
Products Affected:
200-120 Balanced Scuba Regulator Assembly, 200-125 Balanced Scuba Regulator, Assembly M-48 SuperMask/M-48 MOD-1, 200-130 Scuba Pod Assembly with Balanced Scuba Regulator, 200-150 1st Stage w/Balanced 2nd Stage Scuba Regulator Assembly, 505-455 455 Balanced Regulator, 505-776 455 Pod Assembly, 525-765 Conversion Kit 455 Reg. for 350/450 Reg., 500-700/701 KM 97 Helmet Regulator, the 455, Plus all helmets and Band Masks that are ordered with the 455 regulator
1 of 2016
Subject:
Change to configurations offered & Rebreather Description.
“800 series” M-48 SuperMasks® & MOD-1 Full Face Masks now “805 series.”
Products Affected:
800-048 M-48 SuperMask®, with POD, No Regulator
800-050 M-48 SuperMask®, with POD & Regulator
800-150 M-48 MOD-1, with POD, No Regulator
800-151 M-48 MOD-1, with POD & Regulator
12 of 2015
Subject:
Misuse/Abuse of Technician Training Certificates
Products Affected:
All Kirby Morgan® Products
1 of 2015
Subject:
Notice of False Training Certificates
Products Affected:
All Kirby Morgan® Products
8 of 2015
Subject:
USE OF AFTER MARKET OR NON-GENUINE KIRBY MORGAN® PARTS
9 of 2014
Subject:
Regarding Second Stages Used with
M-48 SuperMask® (P/N 800-048) and M-48 MOD 1 (P/N 800-150)
2 of 2014
Subject:
Balanced 2nd Stage SCUBA Regulator
Products Affected:
800-151 M48 MOD 1 Mask with Regulator
800-050 M48 SuperMask® with Regulator
6 of 2014
Subject:
M48 Full Face Masks without Pods now Ship
with Straps & Strap Keepers
Products Affected:
Masks affected: 805-010C (clear sides) M48 SuperMask, Mask Only(No Pod).
805-010 (black sides) M48 SuperMask, Mask Only(No Pod).
805-175 M48 MOD 1 Mask, Mask Only, (No Pod).
1 of 2014
Subject:
Unauthorized Sellers / Buyer Beware!
5 of 2011
Subject:
New Product Maintenance & Repair Log Book, P/N 125-001
Products Affected:
All complete Helmets and Masks, including part numbers 300-036, 300-036MS, 300-037, 300-038, 300-038MS, 500-010, 500-011, 500-025, 500-026, 500-028, 500-029, 500-040, 500-041, 500-050, 500-051, 500-050NS, 500-051NS, 500-070, 500-071, 500-080, 500-081, 500-090, 500-091, 500-100, 500-101, 500-117, 500-599, 500-600 and 800-050
2 of 2005
Subject:
New Hi Flow Inlet Swivel - Part #305-017
Products Affected:
KMDSI Part #305-017 Hi Flow Inlet Swivel for use with EXO®-26®, EXO®-BR®, and M-48 SuperMask®
4 of 2002
Subject:
Product Change to Part #800-015 SuperMask® Scuba Pod
Products Affected:
SuperMask® Scuba Pod
SL 17B Bulletins
5 of 2019
Subject:
Acceptable Breathing Systems for Kirby Morgan® Helmets and BandMasks®
Products Affected:
All Kirby Morgan® helmets and BandMasks®
4 of 2019
Subject:
Maintenance Inspection Timetable for KMDSI Helmets and BandMasks
Products Affected:
All Kirby Morgan® helmets and BandMasks®
3 of 2019
Subject:
P/N 510-776 Exhaust Valve Color of Material Changed from Clear to Black
Products Affected:
205-025 Regulator Body Assembly, 225-120 Rebuild Kit, Balanced Scuba Regulator, 505-085 Regulator Body Assembly, 505-560 SS Balanced Reg Assy, Superflow 450, 505-725 Tri Valve Assembly, 505-729 Tri Valve Assembly, SL27, 505-730 Quad Valve Exhaust Assembly, 505-758 350 REGULATOR POD ASSEMBLY, 505-776 455 REGULATOR POD ASSEMBLY, 525-217 Soft Goods Overhaul Kit, 57, 525-218 Helmet Spares Kit, 57, 525-356 Kit, Soft Goods, 37/17K/17C/57 w/455 Reg, 525-358 Kit, Soft Goods Overhaul, 18/28, 525-359 Kit, Soft Goods Overhaul, 27 w/455 Reg., 525-360 Kit, Soft Goods Overhaul, 17A/B, 525-363 Kit,Soft Goods Overhaul, K/37/C, 525-364 Soft Goods Kit, KM97, 525-365 Kit, Soft Goods Overhaul, 27, 525-367 Kit, Soft Goods Overhaul 18/28 w/455 Reg, 525-368 Kit, Soft Goods Overhaul, KM 47, 525-370 Helmet Spares Kit, KM 97, 525-377 Kit, Soft Goods Overhaul, KM 77, 525-378 Helmet Spares Kit, KMDH 77, 525-380 Kit, Soft Goods Overhaul, KM 37 S.S., 525-381 Helmet Spares Kit, KM 37 S.S., 525-718 Reg. Rebuild Kit, S.S. Balanced, 525-752 Tri-Valve Exhaust Kit, 525-755 Tri-Valve Exhaust Kit, SL27, 525-763 Conversion Kit, 450 Regulator For SL 27, 525-764 Kit, REX Whisker Exhaust, 525-767 Rebuild Kit, 455 Balanced Regulator
9 of 2018
Subject:
P/N 525-023 O-ring Kit for the SuperLite® 17B & MK-21 and 525-345 Helmet Spares Kit for the SuperLite® 17B and MK-21 are Discontinued
Products Affected:
525-023 O-ring Kit for the SuperLite® 17B & MK-21 and 525-345 Helmet Spares Kit for the SuperLite® 17B & MK-21
7 of 2018
Subject:
525-102 Double Exhaust Kit 17A/B, 525-130 Front Weight Kit, 17A/B, 525-103, 550-087 are Discontinued
Products Affected:
525-102 Double Exhaust Kit, 17A/B, 550-087 Double Exhaust Body, 525-103 Double Exhaust, Whisker Only, 510-558 Double Exhaust Whisker, 525-130 Front Weight Kit, 17A/B
4 of 2016
Subject:
Standardization of Microphones & Earphones
Products Affected:
500-010/011 SuperLite® 17A/B Helmet, 500-599/600 SuperLite® 17C Helmet, 500-025/026/028/029 Band Mask® 18/28.
9 of 2016
Subject:
Twenty Five Years is the Recommended Service Life for Fiberglass Shells, Frames & Yokes
5 of 2014 (UPDATED March 23, 2016)
Subject:
Unauthorized “Painting” (resurfacing) Helmet Shells & KMB 18 Frames
Serial Number Tampering
Products Affected:
All fiberglass helmets / KMB 18 BandMasks.
14 of 2016
Subject:
The Stability of Whisker Clamps
Products Affected:
All Kirby Morgan Helmets and BandMasks® with Tri or Quad Valve Exhaust Systems, excluding the KM 47 fiberglass helmet and the KM 77 stainless steel helmet.
7 of 2016
Subject:
O-ring Kits & Overseas Spares Kits Are Now Obsolete
O-rings From O-ring Kits Now In Soft Goods Kits Shipping Immediately
Products Affected:
525-019 O-ring Kit, SL 27, 37, 57, 17K, 525-301 O-ring Kit, SL 17B, 525-303 O-ring Kit, 18/28, 525-304 O-ring Kit, KM 97, 525-305 O-ring Kit, SL 17C, 525-306 O-ring Kit, KM 47, 525-307 O-ring Kit, KM 77, 525-308 O-ring Kit, 37SS
1 of 2015
Subject:
Notice of False Training Certificates
Products Affected:
All Kirby Morgan® Products
8 of 2015
Subject:
USE OF AFTER MARKET OR NON-GENUINE KIRBY MORGAN® PARTS
3 of 2013
Subject:
Service Life Recommendation for Fiberglass Shells and Frames/
MK 21 Shell Conversion
Products Affected:
Primarily older SL 17A/B Helmet Shells (P/N 520-065) and older KMB 18 BandMask® frames (P/N 520-055).
Not accepting requests for MK 21 conversions to SL 17s.
1 of 2015
Subject:
510-522 Head Cushion (for 510-521 17B Head Cushion) bag material changed
Products Affected:
510-522 Head Cushion Bags on 510-521 SL17A/B Head Cushions for inside SuperLite® 17A/B Helmets.
12 of 2015
Subject:
Misuse/Abuse of Technician Training Certificates
Products Affected:
All Kirby Morgan® Products
6 of 2015
Subject:
This bulletin is to serve as a reminder of an important difference
in installation procedure between the port retainer screws for the
fiberglass helmets verses those of the stainless steel helmets.
3 of 2014
Subject:
Maintenance Manuals in New Modular Format on USB Flash Drive
Products Affected:
All Kirby Morgan Helmets & BandMasks®
11 of 2014
Subject:
SL 17A/B Head Cushion, P/N 510-521. Material Improved.
525-745 Head Cushion Foam Spacer now ships with SL 17B Helmets
Products Affected:
500-010, 500-011 SuperLite® 17B Helmets, 500-117 MK 21 Helmet.
510-521 SL 17A/B Head Cushions, 510-522 Head Cushion Bag Only, 525-317 SL 17A/B Helmet Spares Kit, 525-325 SL 17A/B Overseas Spares Kit, 525-345 MK-21 Helmet Spares Kit.
1 of 2014
Subject:
Unauthorized Sellers / Buyer Beware!
14 of 2014
Subject:
Hard Copy Manuals No Longer Available. USB Flash Drive Manuals now ship with, and are available on our website for All Product Manuals (Modular Format).
Products Affected:
KMACS-5 and EXO® BR.
5 of 2014 (UPDATED March 23, 2016)
Subject:
Unauthorized “Painting” (resurfacing) Helmet Shells & KMB 18 Frames
Serial Number Tampering
Products Affected:
All fiberglass helmets / KMB 18 BandMasks.
4 of 2013
Subject:
Chin Strap Assembly, 505-111 Lengthened
Products Affected:
Helmets affected: SuperLite® 17B, 17C, 27®, KM 37, KM37NS, KM 47, KM 57, KM 77, KM 37SS.
Parts affected: 505-111 Chin Strap Assembly (not sold separately*).
*Sold as:
505-748 Chin Strap Assembly with snaps, SS (order for stainless steel helmets).
525-716 Chin Strap Assembly Kit (order for fiberglass helmets).
All the following Neck Ring Assemblies: 505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-
104, 505-117, 505-118, 505-119, 505-120.
3 of 2013
Subject:
Service Life Recommendation for Fiberglass Shells and Frames/
MK 21 Shell Conversion
Products Affected:
Primarily older SL 17A/B Helmet Shells (P/N 520-065) and older KMB 18 BandMask® frames (P/N 520-055).
Not accepting requests for MK 21 conversions to SL 17s.
5 of 2011
Subject:
New Product Maintenance & Repair Log Book, P/N 125-001
Products Affected:
All complete Helmets and Masks, including part numbers 300-036, 300-036MS, 300-037, 300-038, 300-038MS, 500-010, 500-011, 500-025, 500-026, 500-028, 500-029, 500-040, 500-041, 500-050, 500-051, 500-050NS, 500-051NS, 500-070, 500-071, 500-080, 500-081, 500-090, 500-091, 500-100, 500-101, 500-117, 500-599, 500-600 and 800-050
4 of 2011
Subject:
Diaphragm Part Number 510-553
Products Affected:
(Possibly) Regulator Diaphragms p/n's 510-553, 500-010, 500-011, 500-040, 500-041, 500-050, 500- 051, 500-100, 500-101, 500-025, 500-026, 500-028, 500-029, 500-599, 500-600, 505-069, 505-069NS, 505-027, 505-026, 525-309, 525-317, 525-319, 525-322, 525-323, 525-325, 525-327, 525-333, 525-341, 525-345, 525-347, 525-349, 525-360, 525-363, 525-365, 525-358, 525-381, 525-382, 525-388, 525-327, 305-175, 325-325 (Shipped January 23rd, 2009 through December 2010).
1 of 2011
Subject:
Earphone Speaker, 515-008, is replaced by 515-090 Earphone Speaker
Products Affected:
(No change to these part numbers).
2 of 2010
Subject:
Anode Kits For KMDSI Helmets And BandMasks®.
Products Affected:
N/A
1 of 2010
Subject:
Starboard Whisker Wing, P/N 510-786; Port Whisker Wing, P/N 510-787.
Products Affected:
525-216, 525-218, 525-317, 525-319, 525-323, 525-325, 525-327, 525-333, 525-341, 525-347, 525-349, 525-752, 525-755, 525-759, all helmets and BandMasks except the KM-47 and 77.
5 of 2009
Subject:
SL 17 A/B & MK 21 Neck clamp
Products Affected:
P/N 505-055
2 of 2009
Subject:
Regulator Mount Nut Socket Wrench P/N 525-625
Products Affected:
525-620, Tool Kit w/Pouch
1 of 2009
Subject:
Kirby Morgan Helmet Retaining Systems
10 of 2009
Subject:
New Product Oral Nasal With Lens Retainer Kit, P/N 525-775 and Lens Retainer Kit, P/N 525-776
Products Affected:
All Kirby Morgan® Helmets Except The KM-47, KM-77 And The MK-21
9 of 2009
Subject:
New Product Oral Nasal Mask P/N 510-747
Products Affected:
P/N 510-690 Oral Nasal
7 of 2009
Subject:
New Product Tool Kit Pouch P/N 525-613
Products Affected:
P/N 525-620 and P/N 525-768
1 of 2008
Subject:
One Way Valve Product Change
Products Affected:
300-145, 300-150, 300-155, 505-024, 505-025,505-060, 505-732, 525-049, 525-330 and all Kirby Morgan® Helmets and BandMask®.
1 of 2008
Subject:
Dry Suit Inflation Installation onto a Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
Products Affected:
Dry Suit's with Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
1 of 2007
Subject:
Helmet Shell Repair Caution
Products Affected:
All Kirby Morgan® Helmets and BandMasks®
5 of 2007
Subject:
Microphones Now Shipping With Strain Relief Ring & Equalizing Vent
Products Affected:
515-022, 515-029, 315-201, 515-023, 515-033, 515-009, 315-206, 315-017, 515-024 and 515-030
3 of 2007
Subject:
Longer Waterproof Communications Connector Now Standard
Products Affected:
505-047 Male Waterproof Assembly, 505-065 Male Waterproof Assembly, SL27®, 515-024 Communication Assemble with MWP
6 of 2007
Subject:
New Flex Control Knobs, Part Numbers 520-524 & 520-525
Products Affected:
300-145, 300-150, 300-155, 325-095, 505-024, 505-025, 505-070, 505-071,
505-080, 505-081, 525-049, 525-311 and all Kirby Morgan® Helmets and BandMasks®.
6 of 2006
Subject:
New Manufacturing Process & Part Number for Rear Hinge Tab. Old Part Number #545-013, New Part Number #540-157
Products Affected:
KMDSI SuperLite® 17B
5 of 2006
Subject:
Whisker Clamp Replacement Kit # 525-032
Products Affected:
KMDSI Tri/Quad valve assemblies P/N’s 525-752, 525-755 & 525-759
2 of 2006
Subject:
Replacements for Recalled Valves (Reference Safety Notice #1 of 2005)
Products Affected:
One Way Valve (part #555-195)
1 of 2006
Subject:
New Air Train Gasket, KMDSI Part #510-762
Products Affected:
SuperLite® and Kirby Morgan® helmets, and BandMask® model KMB 18
8 of 2006
Subject:
Stainless Bolt & Nut Replaces Sleeve and Bolts for Hinge on SuperLite®-17 Old Part Numbers #550-018, 530-201, New Part Numbers #530-034, 530-028
Products Affected:
KMDSI SuperLite® 17B
1 of 2005
Subject:
Defective One Way Valve Recall
Products Affected:
Kirby Morgan® helmets, BandMasks® and replacement parts. KMDSI P/N 555-195 One Way Valve and P/N 505-060 One Way Valve Assembly.
12 of 2005
Subject:
New Microphone for Kirby Morgan® Masks and Helmets
Products Affected:
KMDSI Masks, Helmets and all communications sets and assemblies.
11 of 2005
Subject:
Hinge Bolt Part #530-027
Products Affected:
Kirby Morgan® Helmets
6 of 2005
Subject:
Discontinuance of “A” Side Block Assembly, P/N 505-022
Products Affected:
All helmets and BandMasks®
4 of 2005
Subject:
Quad Valve™ Cover Kit (KMDSI Part #525-762)
Products Affected:
Kirby Morgan® helmets currently equipped with a Tri-Valve® exhaust,
3 of 2005
Subject:
Quad Valve™ Exhaust (KMDSI Part #525-759) Now Standard
Products Affected:
Kirby Morgan®- 37 Helmet , 500-050/051 & SuperLite® -17 500-010/011
15 of 2005
Subject:
New Fasteners
Products Affected:
Kirby Morgan® Helmets and Masks Part Numbers 530-035, 530-040, 530-045
1 of 2004
Subject:
Possible damage to emergency valve main body (550-140) between male pipe threads and the "B" side block bodies (550-029) as well as the manifold block body (350-050) at the mating female pipe threads.
Products Affected:
Any Kirby Morgan® helmets or masks incorporating a side block or manifold block, or separate manifold block assembly.
3 of 2004
Subject:
Quad Valve™ Exhaust (KMDSI Part #525-759)
Products Affected:
All Kirby Morgan® SuperLite® Helmets and KM 37/57
2 of 2004
Subject:
New Tri-Valve® Exhaust Kit Part # 525-752 and 525-755 (SL 27® only)
Products Affected:
All Kirby Morgan® SuperLite® Helmets and KMB BandMasks®
1 of 2003
Subject:
Neck Clamp Assembly
KMDSI Part # 505-055 (and pre '89 505-003)
Products Affected:
Kirby Morgan® SuperLite®-17A/B & U.S. Navy MK-21 Mod. O & Mod. I Helmets
3 of 2003
Subject:
Neck Clamp Assembly KMDSI Part # 505-055 (and pre '89 505-003)
Products Affected:
Kirby Morgan® SuperLite®-17A/B & U.S. Navy MK-21 Mod. O & Mod. I Helmets
2 of 2003
Subject:
Product Change to Part #550-039 Alignment Sleeve
Products Affected:
Kirby Morgan® SuperLite®-17A/B & U.S. Navy MK-21 Mod. O & Mod. I Helmets
2 of 2002
Subject:
Use of Lubricants on Regulator Exhaust Valve P/N 510-552
Products Affected:
KMDSI Part #510-552
1 of 2002
Subject:
Regulator Exhaust Valve Possible Leakage
Products Affected:
KMDSI Part #510-552, 305-175, 325-323, 325-325, 505-026, 505-027, 505-068, 505-069, 525-120, 525-255, 525-309
2 of 2002
Subject:
EXCHANGE/DISCOUNT program
Products Affected:
Old 505-015 "Push Pin" Latch Catch Assemblies, on All SuperLite®-17A/B & U.S. Navy MK-21 Mod. 0 & Mod. I Helmets
1 of 2002
Subject:
Maintenance Inspection Timetable for all KMDSI Helmets and BandMasks®
Products Affected:
All KMDSI helmets and BandMasks®
1 of 2002
Subject:
Correct Orientation of Oral Nasal Body P/N 520-020 & Valve P/N 510-550
Products Affected:
All KMDSI Helmets and BandMasks®
1 of 2001
Subject:
High Flow Auxiliary Valve Part # 505-070
Products Affected:
All SuperLite® Helmets and KMB BandMasks® manufactured prior to October 1993
1 of 2001
Subject:
"Painting" (resurfacing) Helmet Shells & Mask Frames
Products Affected:
All KMDSI Fiberglass Helmet Shells & Fiberglass Mask Frames
1 of 2000
Subject:
The neck clamp assembly.
Products Affected:
Kirby Morgan® SuperLite®-17 A/B / MK 21 Neck Clamp Assemblies.
2 of 2000
Subject:
Material change to SL-17 Yoke
Products Affected:
Yokes for all SuperLite® 17 A/B and MK 21 Helmets.
1 of 1999
Subject:
SuperLite® 17A/B & MK 21 Neck Clamp Numbering
Products Affected:
All SuperLite® 17A/B & MK 21 Yoke/Neck Clamp Assemblies
1 of 1999
Subject:
Weld Strength
Products Affected:
SuperLite® 17A/B Neck Clamp Assembly
1 of 1999
Subject:
Communications Connection Nuts
Products Affected:
All bare wire communications posts
1 of 1999
Subject:
Change of Yoke
Products Affected:
Yokes for the SuperLite® 17A/B & MK 21 Helmets
1 of 1998
Subject:
Product materials change to SuperLite® 17, MK 21 Visor & KMB 18 Comfort Insert
Products Affected:
SuperLite® 17, MK 21 Visor & KMB 18 Comfort Insert
1 of 1997
Subject:
Predive Equipment Inspections
Products Affected:
Kirby Morgan® SuperLite® Helmets & BandMasks®
1 of 1997
Subject:
Locking Device for Yoke
Products Affected:
SuperLite® 17A/B & MK 21 Helmets
1 of 1997
Subject:
High Flow Emergency Valve
Products Affected:
SuperLite® 17, 27, KMB 18/28 and Manifold Block Assemblies
1 of 1996
Subject:
New silicone oral nasal mask part number 510-690
Products Affected:
Replace part numbers 510-540 and 510-547
1 of 1995
Subject:
Counterfeit Kirby Morgan® KMB-18 BandMask® Diving Masks and SuperLite®-17 Diving Helmets.
3 of 1995
Subject:
Drawstring Neck Dam Alteration for Fit.
Products Affected:
Kirby Morgan® SuperLite®-17 A/B & U.S. Navy MK-21 Mod.O & Mod.I Helmets.
2 of 1995
Subject:
Locking Device for Yoke
Products Affected:
SuperLite® 17A/B & MK 21 Helmets
1 of 1994
Subject:
An unauthorized hole drilled in the shaft of a Plunger (P/N 550-016) on Latch Catch Assembly
(Push Pin) P/N 505-015.
1 of 1993
Subject:
High Flow Emergency Valve
Products Affected:
SuperLite® 17, 27, KMB 18/28 and Manifold Block Assemblies
1 of 1992
Subject:
Possible loosening of Emergency Valve Assembly (P/N 505-018) from the "B" Side Block Assembly Body (P/N 550-029) on "B" side block assembly style D.S.I Helmets and Masks.
1 of 1991
Subject:
SuperLite®-17 Commercial Diving Helmet
1 of 1991
Subject:
POSSIBLE LOOSENING OF LATCH CATCH ASSEMBLY PLUNGER (P/N 550-016), SCREW (P/N 530-205), AND SPRING (P/N 535-801) on the SuperLite 17 A/B Helmet.
1 of 1989
Subject:
Non-Diving Failure Of Stainless Steel Adapter On The Side Block Of The DSI®
SuperLite®-17 B Reclaim Helmet During Servicing
Products Affected:
SuperLite®- 17B
1 of 1987
Subject:
SuperLite® 17 A/B Yoke Systems - Old Style catch
SL 17C Bulletins
5 of 2019
Subject:
Acceptable Breathing Systems for Kirby Morgan® Helmets and BandMasks®
Products Affected:
All Kirby Morgan® helmets and BandMasks®
4 of 2019
Subject:
Maintenance Inspection Timetable for KMDSI Helmets and BandMasks
Products Affected:
All Kirby Morgan® helmets and BandMasks®
3 of 2019
Subject:
P/N 510-776 Exhaust Valve Color of Material Changed from Clear to Black
Products Affected:
205-025 Regulator Body Assembly, 225-120 Rebuild Kit, Balanced Scuba Regulator, 505-085 Regulator Body Assembly, 505-560 SS Balanced Reg Assy, Superflow 450, 505-725 Tri Valve Assembly, 505-729 Tri Valve Assembly, SL27, 505-730 Quad Valve Exhaust Assembly, 505-758 350 REGULATOR POD ASSEMBLY, 505-776 455 REGULATOR POD ASSEMBLY, 525-217 Soft Goods Overhaul Kit, 57, 525-218 Helmet Spares Kit, 57, 525-356 Kit, Soft Goods, 37/17K/17C/57 w/455 Reg, 525-358 Kit, Soft Goods Overhaul, 18/28, 525-359 Kit, Soft Goods Overhaul, 27 w/455 Reg., 525-360 Kit, Soft Goods Overhaul, 17A/B, 525-363 Kit,Soft Goods Overhaul, K/37/C, 525-364 Soft Goods Kit, KM97, 525-365 Kit, Soft Goods Overhaul, 27, 525-367 Kit, Soft Goods Overhaul 18/28 w/455 Reg, 525-368 Kit, Soft Goods Overhaul, KM 47, 525-370 Helmet Spares Kit, KM 97, 525-377 Kit, Soft Goods Overhaul, KM 77, 525-378 Helmet Spares Kit, KMDH 77, 525-380 Kit, Soft Goods Overhaul, KM 37 S.S., 525-381 Helmet Spares Kit, KM 37 S.S., 525-718 Reg. Rebuild Kit, S.S. Balanced, 525-752 Tri-Valve Exhaust Kit, 525-755 Tri-Valve Exhaust Kit, SL27, 525-763 Conversion Kit, 450 Regulator For SL 27, 525-764 Kit, REX Whisker Exhaust, 525-767 Rebuild Kit, 455 Balanced Regulator
6 of 2018
Subject:
Head Cushion Snaps Material—Changed to Stainless Steel
Products Affected:
510-754 Head Cushion (head cushion of all helmets excluding the SuperLite® 17B), 510-722 Head Cushion Bag (the outer covering of 510-754), All Helmets (excluding the SuperLite® 17B), Spares Kits 525-119, 525-218, 525-250, 525-322, 525-333, 525-341, 525-371, 525-378, 525-381
11 of 2016
Subject:
Soft Goods Overhaul Kits for Units with 455 Regulators
Products Affected:
KMB 18 and KMB 28 Band Masks with 455 regulators, SuperLite® 27 Helmet with 455 regulator, SuperLite® 17K Helmet with 455 regulator, SuperLite® 17C Helmet with 455 regulator, Kirby Morgan® 37 Helmet with 455 regulator, Kirby Morgan® 57 Helmet with 455 regulator
4 of 2016
Subject:
Standardization of Microphones & Earphones
Products Affected:
500-010/011 SuperLite® 17A/B Helmet, 500-599/600 SuperLite® 17C Helmet, 500-025/026/028/029 Band Mask® 18/28.
3 of 2016
Subject:
The 455 Stainless Steel, Balanced Regulator is Now Available as an Option from the Factory for the following Helmets & Band Masks
Products Affected:
500-050 & 051 KM 37 Helmets
500-040 & 041 SuperLite® 27® Helmets
500-600 & 599 SuperLite® 17C Helmets
500-028 & 029 KMB 28 Bandmasks®
500-025 & 026 KMB 18 Bandmasks®
9 of 2016
Subject:
Twenty Five Years is the Recommended Service Life for Fiberglass Shells, Frames & Yokes
5 of 2014 (UPDATED March 23, 2016)
Subject:
Unauthorized “Painting” (resurfacing) Helmet Shells & KMB 18 Frames
Serial Number Tampering
Products Affected:
All fiberglass helmets / KMB 18 BandMasks.
8 of 2016
Subject:
P/N 525-211 Sealed Pull Pin Overhaul Kit Now for Two Pins
Products Affected:
P/N 525-211 Sealed Pull Pin Overhaul Kit
14 of 2016
Subject:
The Stability of Whisker Clamps
Products Affected:
All Kirby Morgan Helmets and BandMasks® with Tri or Quad Valve Exhaust Systems, excluding the KM 47 fiberglass helmet and the KM 77 stainless steel helmet.
7 of 2016
Subject:
O-ring Kits & Overseas Spares Kits Are Now Obsolete
O-rings From O-ring Kits Now In Soft Goods Kits Shipping Immediately
Products Affected:
525-019 O-ring Kit, SL 27, 37, 57, 17K, 525-301 O-ring Kit, SL 17B, 525-303 O-ring Kit, 18/28, 525-304 O-ring Kit, KM 97, 525-305 O-ring Kit, SL 17C, 525-306 O-ring Kit, KM 47, 525-307 O-ring Kit, KM 77, 525-308 O-ring Kit, 37SS
4 of 2015
Subject:
525-769 Conversion Kit, 455 Regulator for KM 77
525-116 Front Standoff Kit
525-395 Conversion Kit, Rex Regulator for 37SS
1 of 2015
Subject:
Notice of False Training Certificates
Products Affected:
All Kirby Morgan® Products
8 of 2015
Subject:
USE OF AFTER MARKET OR NON-GENUINE KIRBY MORGAN® PARTS
3 of 2015
Subject:
The 525-765 455 Balanced Regulator Conversion Kit
12 of 2015
Subject:
Misuse/Abuse of Technician Training Certificates
Products Affected:
All Kirby Morgan® Products
6 of 2015
Subject:
This bulletin is to serve as a reminder of an important difference
in installation procedure between the port retainer screws for the
fiberglass helmets verses those of the stainless steel helmets.
14 of 2015
Subject:
P/N 510-754 Head Cushions Change from Zippers to VELCRO® Brand Closures
Products Affected:
510-722 Head Cushion Bag, for Head Cushion 510-754, used in all helmets except the SL 17A/B.
5 of 2015
Subject:
550-232 Sleeves for the sealed pull pins now marked
with groove, effective immediately
Products Affected:
550-232 Pull Pin Sleeve (sold in the 525-112 Sleeve Kits only. Two per kit).
525-112 Pull Pin Sleeve Kit
3 of 2014
Subject:
Maintenance Manuals in New Modular Format on USB Flash Drive
Products Affected:
All Kirby Morgan Helmets & BandMasks®
1 of 2014
Subject:
Unauthorized Sellers / Buyer Beware!
14 of 2014
Subject:
Hard Copy Manuals No Longer Available. USB Flash Drive Manuals now ship with, and are available on our website for All Product Manuals (Modular Format).
Products Affected:
KMACS-5 and EXO® BR.
5 of 2014 (UPDATED March 23, 2016)
Subject:
Unauthorized “Painting” (resurfacing) Helmet Shells & KMB 18 Frames
Serial Number Tampering
Products Affected:
All fiberglass helmets / KMB 18 BandMasks.
12 of 2014
Subject:
540-039 Front Stand Offs (×2 per helmet) added to Kirby Morgan Helmets
Products Affected:
All Kirby Morgan Helmets except the SuperLite 17B.
560-074 Bottom Ring, 560-517 Stainless Steel Helmet Shell,
All shells with Bottom Ring Assemblies: 505-105, 505-106, 505-107, 505-108, 505-162.
2 of 2013
Subject:
Re. 505-110 Sealed Pull Pins- standard on all Kirby Morgan helmets except
the SL 17B & MK 21
Products Affected:
Kirby Morgan helmets except the SL 17B & MK 21.
1 of 2013
Subject:
Head Cushion Foam Kit P/N 525-746
4 of 2013
Subject:
Chin Strap Assembly, 505-111 Lengthened
Products Affected:
Helmets affected: SuperLite® 17B, 17C, 27®, KM 37, KM37NS, KM 47, KM 57, KM 77, KM 37SS.
Parts affected: 505-111 Chin Strap Assembly (not sold separately*).
*Sold as:
505-748 Chin Strap Assembly with snaps, SS (order for stainless steel helmets).
525-716 Chin Strap Assembly Kit (order for fiberglass helmets).
All the following Neck Ring Assemblies: 505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-
104, 505-117, 505-118, 505-119, 505-120.
4 of 2012
Subject:
New Head Cushion (p/n 510-754), Improved Head Cushion Foam Spacer Kit (HCFS, p/n 525-745) and Improved Chin Cushion (p/n 510-683)
Products Affected:
Kirby Morgan dive helmets SL-17C, SL-27, KM-37, KM-47, KM-57, KM-77, and KM-37SS.
7 of 2012
Subject:
Pull Pin Sleeve Kit P/N 525-112
5 of 2011
Subject:
New Product Maintenance & Repair Log Book, P/N 125-001
Products Affected:
All complete Helmets and Masks, including part numbers 300-036, 300-036MS, 300-037, 300-038, 300-038MS, 500-010, 500-011, 500-025, 500-026, 500-028, 500-029, 500-040, 500-041, 500-050, 500-051, 500-050NS, 500-051NS, 500-070, 500-071, 500-080, 500-081, 500-090, 500-091, 500-100, 500-101, 500-117, 500-599, 500-600 and 800-050
4 of 2011
Subject:
Diaphragm Part Number 510-553
Products Affected:
(Possibly) Regulator Diaphragms p/n's 510-553, 500-010, 500-011, 500-040, 500-041, 500-050, 500- 051, 500-100, 500-101, 500-025, 500-026, 500-028, 500-029, 500-599, 500-600, 505-069, 505-069NS, 505-027, 505-026, 525-309, 525-317, 525-319, 525-322, 525-323, 525-325, 525-327, 525-333, 525-341, 525-345, 525-347, 525-349, 525-360, 525-363, 525-365, 525-358, 525-381, 525-382, 525-388, 525-327, 305-175, 325-325 (Shipped January 23rd, 2009 through December 2010).
3 of 2011
Subject:
Reference Chin Strap Kit, P/N 525-716 (Product Bulletin #2 of 2011)
Products Affected:
SuperLite 17C Helmets (p/ns 500-599, 500-600)
2 of 2011
Subject:
Helmet Chin Strap Assembly
1 of 2011
Subject:
Earphone Speaker, 515-008, is replaced by 515-090 Earphone Speaker
Products Affected:
(No change to these part numbers).
4 of 2010
Subject:
Head Cushion Foam Spacer Kit (HCFS) Part Number 525-745
3 of 2010
Subject:
New Kits Part Numbers
525-306, 525-307, 525-308, 525-322, 525-323, 525-377, 525-380, 525-381, 525-382.
Products Affected:
Kits 525-368, 525-377, and 525-380
Helmets SL 17C, KM 77, KM 47 and KM37SS.
2 of 2010
Subject:
Anode Kits For KMDSI Helmets And BandMasks®.
Products Affected:
N/A
7 of 2010
Subject:
530-110 Lock Nut Replaces 330-320 Lock Nut
Products Affected:
505-110 Sealed Pull Pin Assembly
1 of 2010
Subject:
Starboard Whisker Wing, P/N 510-786; Port Whisker Wing, P/N 510-787.
Products Affected:
525-216, 525-218, 525-317, 525-319, 525-323, 525-325, 525-327, 525-333, 525-341, 525-347, 525-349, 525-752, 525-755, 525-759, all helmets and BandMasks except the KM-47 and 77.
6 of 2010
Subject:
Length of Part Number 530-024, Screw, Increased
Products Affected:
505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-101,
505-102, 505-104, 505-118, 505-119, 505-120, 505-744, 505-745, 505-746, 505-747, 525-216, 525-230,
525-341, 525-347, 525-349, 525-372 and 525-379.
2 of 2009
Subject:
Regulator Mount Nut Socket Wrench P/N 525-625
Products Affected:
525-620, Tool Kit w/Pouch
1 of 2009
Subject:
Kirby Morgan Helmet Retaining Systems
10 of 2009
Subject:
New Product Oral Nasal With Lens Retainer Kit, P/N 525-775 and Lens Retainer Kit, P/N 525-776
Products Affected:
All Kirby Morgan® Helmets Except The KM-47, KM-77 And The MK-21
9 of 2009
Subject:
New Product Oral Nasal Mask P/N 510-747
Products Affected:
P/N 510-690 Oral Nasal
7 of 2009
Subject:
New Product Tool Kit Pouch P/N 525-613
Products Affected:
P/N 525-620 and P/N 525-768
4 of 2009
Subject:
Pull Strap Assembly Kit P/N 525-770
Products Affected:
P/N 530-808
2 of 2008
Subject:
Kirby Morgan® Dive Systems is now shipping all helmets (except the 17B) with a new Pull Strap
assembly that has a 1" Stainless Steel "D" ring sewn on the end to hang the neck ring assembly and
allow proper drying. The length of the Pull Strap remains the same.
Products Affected:
All Helmets except SuperLite® 17B
All neck ring assemblies: 505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-101, 505-102,
505-104, 505-117, 505-118, 505-119, 505-120, 505-744, 505-745, 505-746, 505-747.
Kit:
525-230 Dry Suit Neck Ring Ki
1 of 2008
Subject:
One Way Valve Product Change
Products Affected:
300-145, 300-150, 300-155, 505-024, 505-025,505-060, 505-732, 525-049, 525-330 and all Kirby Morgan® Helmets and BandMask®.
1 of 2008
Subject:
Dry Suit Inflation Installation onto a Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
Products Affected:
Dry Suit's with Kirby Morgan® Helmet ‘B’ Side Block, Part Numbers 505-024 & 505-025
6 of 2007
Subject:
New Flex Control Knobs, Part Numbers 520-524 & 520-525
Products Affected:
300-145, 300-150, 300-155, 325-095, 505-024, 505-025, 505-070, 505-071,
505-080, 505-081, 525-049, 525-311 and all Kirby Morgan® Helmets and BandMasks®.
1 of 2007
Subject:
Helmet Shell Repair Caution
Products Affected:
All Kirby Morgan® Helmets and BandMasks®
4 of 2007
Subject:
SuperFlow® 450 Regulator Conversion Kit, Part #525-766
Products Affected:
Kirby Morgan® Helmets and BandMasks® with SuperFlow® 350 Regulator
3 of 2007
Subject:
Longer Waterproof Communications Connector Now Standard
Products Affected:
505-047 Male Waterproof Assembly, 505-065 Male Waterproof Assembly, SL27®, 515-024 Communication Assemble with MWP
7 of 2006
Subject:
Helmet Sealed Pull Pins (Part #505-110) No Longer Marked with an “S”
Products Affected:
All new Kirby Morgan® helmets that utilize the locking collar design
5 of 2006
Subject:
Whisker Clamp Replacement Kit # 525-032
Products Affected:
KMDSI Tri/Quad valve assemblies P/N’s 525-752, 525-755 & 525-759
2 of 2006
Subject:
Replacements for Recalled Valves (Reference Safety Notice #1 of 2005)
Products Affected:
One Way Valve (part #555-195)
1 of 2006
Subject:
New Air Train Gasket, KMDSI Part #510-762
Products Affected:
SuperLite® and Kirby Morgan® helmets, and BandMask® model KMB 18
1 of 2005
Subject:
Defective One Way Valve Recall
Products Affected:
Kirby Morgan® helmets, BandMasks® and replacement parts. KMDSI P/N 555-195 One Way Valve and P/N 505-060 One Way Valve Assembly.
12 of 2005
Subject:
New Microphone for Kirby Morgan® Masks and Helmets
Products Affected:
KMDSI Masks, Helmets and all communications sets and assemblies.
1 of 2005
Subject:
Regulator assembly Part # 505-069
Products Affected:
Kirby Morgan® helmets and BandMasks®
11 of 2005
Subject:
Hinge Bolt Part #530-027
Products Affected:
Kirby Morgan® Helmets
17 of 2005
Subject:
Modified Front Yoke Hinge, Part# 550-216
Products Affected:
SuperLite®-17C
3 of 2005
Subject:
Quad Valve™ Exhaust (KMDSI Part #525-759) Now Standard
Products Affected:
Kirby Morgan®- 37 Helmet , 500-050/051 & SuperLite® -17 500-010/011
16 of 2005
Subject:
New Stepped Neck Dam Ring Part# 560-078 and Split Ring Part #540-105
Products Affected:
Kirby Morgan® helmets (with the exception of the SuperLite® 17B)
15 of 2005
Subject:
New Fasteners
Products Affected:
Kirby Morgan® Helmets and Masks Part Numbers 530-035, 530-040, 530-045
13 of 2005
Subject:
Large Bore Regulator Part Number 505-069
Products Affected:
Standard on SuperLite®-17C
1 of 2004
Subject:
Possible damage to emergency valve main body (550-140) between male pipe threads and the "B" side block bodies (550-029) as well as the manifold block body (350-050) at the mating female pipe threads.
Products Affected:
Any Kirby Morgan® helmets or masks incorporating a side block or manifold block, or separate manifold block assembly.
3 of 2004
Subject:
Quad Valve™ Exhaust (KMDSI Part #525-759)
Products Affected:
All Kirby Morgan® SuperLite® Helmets and KM 37/57
2 of 2004
Subject:
New Tri-Valve® Exhaust Kit Part # 525-752 and 525-755 (SL 27® only)
Products Affected:
All Kirby Morgan® SuperLite® Helmets and KMB BandMasks®
2 of 2002
Subject:
Use of Lubricants on Regulator Exhaust Valve P/N 510-552
Products Affected:
KMDSI Part #510-552
1 of 2002
Subject:
Regulator Exhaust Valve Possible Leakage
Products Affected:
KMDSI Part #510-552, 305-175, 325-323, 325-325, 505-026, 505-027, 505-068, 505-069, 525-120, 525-255, 525-309
1 of 2002
Subject:
Maintenance Inspection Timetable for all KMDSI Helmets and BandMasks®
Products Affected:
All KMDSI helmets and BandMasks®
1 of 2002
Subject:
Correct Orientation of Oral Nasal Body P/N 520-020 & Valve P/N 510-550
Products Affected:
All KMDSI Helmets and BandMasks®
1 of 2001
Subject:
"Painting" (resurfacing) Helmet Shells & Mask Frames
Products Affected:
All KMDSI Fiberglass Helmet Shells & Fiberglass Mask Frames
1 of 1999
Subject:
Communications Connection Nuts
Products Affected:
All bare wire communications posts
3 of 1999
Subject:
Swing Catch Retrofit & Locking Collar Plate
Products Affected:
Kirby Morgan® SuperLite® 27 & 17C Helmets
1 of 1998
Subject:
Product materials change to SuperLite® 17, MK 21 Visor & KMB 18 Comfort Insert
Products Affected:
SuperLite® 17, MK 21 Visor & KMB 18 Comfort Insert
1 of 1997
Subject:
Predive Equipment Inspections
Products Affected:
Kirby Morgan® SuperLite® Helmets & BandMasks®
1 of 1996
Subject:
New silicone oral nasal mask part number 510-690
Products Affected:
Replace part numbers 510-540 and 510-547
4 of 1995
Subject:
1) Swing Catch RetroFit &
2) Locking Collar Plating
Products Affected:
Kirby Morgan SuperLite 17C and 27 helmets
1 of 1995
Subject:
Counterfeit Kirby Morgan® KMB-18 BandMask® Diving Masks and SuperLite®-17 Diving Helmets.
1 of 1995
Subject:
O-ring Material change.
Products Affected:
Kirby Morgan® SuperLite® 17C & 27 Helmets.
SL 17K Bulletins
5 of 2019
Subject:
Acceptable Breathing Systems for Kirby Morgan® Helmets and BandMasks®
Products Affected:
All Kirby Morgan® helmets and BandMasks®
4 of 2019
Subject:
Maintenance Inspection Timetable for KMDSI Helmets and BandMasks
Products Affected:
All Kirby Morgan® helmets and BandMasks®
6 of 2018
Subject:
Head Cushion Snaps Material—Changed to Stainless Steel
Products Affected:
510-754 Head Cushion (head cushion of all helmets excluding the SuperLite® 17B), 510-722 Head Cushion Bag (the outer covering of 510-754), All Helmets (excluding the SuperLite® 17B), Spares Kits 525-119, 525-218, 525-250, 525-322, 525-333, 525-341, 525-371, 525-378, 525-381
11 of 2016
Subject:
Soft Goods Overhaul Kits for Units with 455 Regulators
Products Affected:
KMB 18 and KMB 28 Band Masks with 455 regulators, SuperLite® 27 Helmet with 455 regulator, SuperLite® 17K Helmet with 455 regulator, SuperLite® 17C Helmet with 455 regulator, Kirby Morgan® 37 Helmet with 455 regulator, Kirby Morgan® 57 Helmet with 455 regulator
9 of 2016
Subject:
Twenty Five Years is the Recommended Service Life for Fiberglass Shells, Frames & Yokes
5 of 2014 (UPDATED March 23, 2016)
Subject:
Unauthorized “Painting” (resurfacing) Helmet Shells & KMB 18 Frames
Serial Number Tampering
Products Affected:
All fiberglass helmets / KMB 18 BandMasks.
8 of 2016
Subject:
P/N 525-211 Sealed Pull Pin Overhaul Kit Now for Two Pins
Products Affected:
P/N 525-211 Sealed Pull Pin Overhaul Kit
14 of 2016
Subject:
The Stability of Whisker Clamps
Products Affected:
All Kirby Morgan Helmets and BandMasks® with Tri or Quad Valve Exhaust Systems, excluding the KM 47 fiberglass helmet and the KM 77 stainless steel helmet.
7 of 2016
Subject:
O-ring Kits & Overseas Spares Kits Are Now Obsolete
O-rings From O-ring Kits Now In Soft Goods Kits Shipping Immediately
Products Affected:
525-019 O-ring Kit, SL 27, 37, 57, 17K, 525-301 O-ring Kit, SL 17B, 525-303 O-ring Kit, 18/28, 525-304 O-ring Kit, KM 97, 525-305 O-ring Kit, SL 17C, 525-306 O-ring Kit, KM 47, 525-307 O-ring Kit, KM 77, 525-308 O-ring Kit, 37SS
1 of 2015
Subject:
Notice of False Training Certificates
Products Affected:
All Kirby Morgan® Products
8 of 2015
Subject:
USE OF AFTER MARKET OR NON-GENUINE KIRBY MORGAN® PARTS
12 of 2015
Subject:
Misuse/Abuse of Technician Training Certificates
Products Affected:
All Kirby Morgan® Products
6 of 2015
Subject:
This bulletin is to serve as a reminder of an important difference
in installation procedure between the port retainer screws for the
fiberglass helmets verses those of the stainless steel helmets.
14 of 2015
Subject:
P/N 510-754 Head Cushions Change from Zippers to VELCRO® Brand Closures
Products Affected:
510-722 Head Cushion Bag, for Head Cushion 510-754, used in all helmets except the SL 17A/B.
5 of 2015
Subject:
550-232 Sleeves for the sealed pull pins now marked
with groove, effective immediately
Products Affected:
550-232 Pull Pin Sleeve (sold in the 525-112 Sleeve Kits only. Two per kit).
525-112 Pull Pin Sleeve Kit
3 of 2014
Subject:
Maintenance Manuals in New Modular Format on USB Flash Drive
Products Affected:
All Kirby Morgan Helmets & BandMasks®
5 of 2014 (UPDATED March 23, 2016)
Subject:
Unauthorized “Painting” (resurfacing) Helmet Shells & KMB 18 Frames
Serial Number Tampering
Products Affected:
All fiberglass helmets / KMB 18 BandMasks.
1 of 2014
Subject:
Unauthorized Sellers / Buyer Beware!
2 of 2013
Subject:
Re. 505-110 Sealed Pull Pins- standard on all Kirby Morgan helmets except
the SL 17B & MK 21
Products Affected:
Kirby Morgan helmets except the SL 17B & MK 21.
5 of 2012
Subject:
Washer P/N 530-556 Added to Kit P/N 525-717 KM 37, 47, 57 and 17K Brackets Kit
7 of 2012
Subject:
Pull Pin Sleeve Kit P/N 525-112
5 of 2011
Subject:
New Product Maintenance & Repair Log Book, P/N 125-001
Products Affected:
All complete Helmets and Masks, including part numbers 300-036, 300-036MS, 300-037, 300-038, 300-038MS, 500-010, 500-011, 500-025, 500-026, 500-028, 500-029, 500-040, 500-041, 500-050, 500-051, 500-050NS, 500-051NS, 500-070, 500-071, 500-080, 500-081, 500-090, 500-091, 500-100, 500-101, 500-117, 500-599, 500-600 and 800-050
4 of 2011
Subject:
Diaphragm Part Number 510-553
Products Affected:
(Possibly) Regulator Diaphragms p/n's 510-553, 500-010, 500-011, 500-040, 500-041, 500-050, 500- 051, 500-100, 500-101, 500-025, 500-026, 500-028, 500-029, 500-599, 500-600, 505-069, 505-069NS, 505-027, 505-026, 525-309, 525-317, 525-319, 525-322, 525-323, 525-325, 525-327, 525-333, 525-341, 525-345, 525-347, 525-349, 525-360, 525-363, 525-365, 525-358, 525-381, 525-382, 525-388, 525-327, 305-175, 325-325 (Shipped January 23rd, 2009 through December 2010).
1 of 2011
Subject:
Earphone Speaker, 515-008, is replaced by 515-090 Earphone Speaker
Products Affected:
(No change to these part numbers).
2 of 2010
Subject:
Anode Kits For KMDSI Helmets And BandMasks®.
Products Affected:
N/A
7 of 2010
Subject:
530-110 Lock Nut Replaces 330-320 Lock Nut
Products Affected:
505-110 Sealed Pull Pin Assembly
1 of 2010
Subject:
Starboard Whisker Wing, P/N 510-786; Port Whisker Wing, P/N 510-787.
Products Affected:
525-216, 525-218, 525-317, 525-319, 525-323, 525-325, 525-327, 525-333, 525-341, 525-347, 525-349, 525-752, 525-755, 525-759, all helmets and BandMasks except the KM-47 and 77.
6 of 2010
Subject:
Length of Part Number 530-024, Screw, Increased
Products Affected:
505-090, 505-093, 505-094, 505-095, 505-097, 505-100, 505-101,
505-102, 505-104, 505-118, 505-119, 505-120, 505-744, 505-745, 505-746, 505-747, 525-216, 525-230,
525-341, 525-347, 525-349, 525-372 and 525-379.
2 of 2009
Subject:
Regulator Mount Nut Socket Wrench P/N 525-625
Products Affected:
525-620, Tool Kit w/Pouch
1 of 2009
Subject:
Kirby Morgan Helmet Retaining Systems
10 of 2009