-
Products
Kirby Morgan offers a wide variety of spare parts kits, rebuild and upgrade kits, from the most basic O-ring kits and soft goods kits, all the way up to the largest “Soft Goods” Spares Kits which contain numerous spare parts and also include many of the smaller kits.
This is a complete list of Kirby Morgan® Regulators, from the time honored Superflow “B” regulator that’s been the standard on our SuperLite® 17B Helmet for over three decades, to our easy breathing SCUBA regulators (plastic or metal), to the highest performance commercial diving helmet and full face mask regulators available in the world (see REX & EXO®BR).
Bulletin #06 of 2015
Submitted by nick on 7 May 2015 - 3:17pm
Interior Title:
Bulletin #6 of 2015
Title Type:
Maintenance & Repair Bulletin
Bulletin Date:
Bulletin #6 of 2015. May 4, 2015
Bulletin Type:
Maintenance & Repair Bulletin
Bulletin Subject:
This bulletin is to serve as a reminder of an important difference
in installation procedure between the port retainer screws for the
fiberglass helmets verses those of the stainless steel helmets.
Body:
When reinstalling the port retainer screws on fiberglass helmets, DO NOT use Loctite® threadlocker.
When reinstalling the port retainer screws on stainless steel helmets, Loctite® 248 Medium Strength, non-drip thread locker is used.
The above and more detailed information on procedure, torques and thread locker requirements will also be found in the Operations & Maintenance Manuals.
Please contact your local KMDSI dealer or e-mail KMDSI at [email protected] for more information.