-
Products
Kirby Morgan offers a wide variety of spare parts kits, rebuild and upgrade kits, from the most basic O-ring kits and soft goods kits, all the way up to the largest “Soft Goods” Spares Kits which contain numerous spare parts and also include many of the smaller kits.
This is a complete list of Kirby Morgan® Regulators, from the time honored Superflow “B” regulator that’s been the standard on our SuperLite® 17B Helmet for over three decades, to our easy breathing SCUBA regulators (plastic or metal), to the highest performance commercial diving helmet and full face mask regulators available in the world (see REX & EXO®BR).
Bulletin # 01 of 2003
Submitted by nick on 20 October 2011 - 7:45am
Interior Title:
Bulletin # 1 of 2003
Title Type:
Change to Product
Bulletin Date:
Bulletin # 1 of 2003. December 15, 2003
Bulletin Type:
Change to Product Bulletin
Bulletin Subject:
EXO® Oral Nasal Tie Wrap
Products Affected:
All EXO® BR & BRMS Full Face Masks
Body:
It has been found that the attachment of the oral nasal mask to the mount ring can be greatly improved by the installation of a tie wrap. This tie wrap is a specially purchased item with optimum dimensions that ensure best possible fit. Use of any other tie wrap may not provide proper holding power, or actually cause the Oral Nasal Mask to dislodge.
Kirby Morgan® announces the addition of a tie wrap to all EXO® BR and BRMS Full Face Masks manufactured after 1 Feb. 2003.
A retrofit kit, Part # 325-060 (5 tie wraps and installation instructions) is available.
Also the following kits now include the tie wraps.
-
EXO® Oral Nasal Mask replacement kit, Part # 325-055
-
EXO® Oral Nasal Conversion Kit, Part # 325-090
-
EXO® Orig. & Standard Reg rebuild kit, Part # 325-305
-
EXO® BR Reg rebuild kit, Part # 325-310
-
EXO® Mask Spares kit, Part # 325-311
-
EXO® Mask Spares kit, Part # 325-307