Home > Products > Helmets > Kirby Morgan 47

Kirby Morgan 47

Body: 

KM47 Top Tab

Kirby Morgan® 47

see the difference

Configurations

  • 500-070 KM 47 Helmet w/Posts
  • 500-071 KM 47 Helmet w/MWPC

Standard Color

Color Options

(hover over to view color options)

The color chart on this page is intended as a reference guide only. The colors here have been matched as closely as possible.


km47_tabber

ZipCart Block: 

My Downloads

Quicktab Manual Reference: 

Manuals 47 high/low res

File Page Size Updated
General Information KMDSI Products INFO View 1.51 MB 05/07/18
One Way Valve OWV View 584.32 KB 05/07/18
Overpressure Relief Valve OPRV View 601.57 KB 05/07/18
Bent Tube BNT View 807.41 KB 05/07/18
REX Regulator and Oral Nasal REX View 1.26 MB 05/07/18
Face Port, Port Retainer and Nose Block FCPRT View 920.39 KB 05/07/18
Handle on Fiberglass Helmets HNDL View 546.68 KB 05/07/18
Neck Ring Assembly, Locking Collar and Front Stand Offs NKDM View 1.02 MB 05/07/18
Chin Strap, Sealed Pull Pins and Swing Catch for Fiberglass Helmets BTM View 1.05 MB 05/07/18
Head Cushion, Head Cushion Foam Spacer (HCFS) and Chin Cushion HDCSH View 1.13 MB 05/07/18
Brass/Chromed Brass Side Block SB View 1 MB 05/07/18
Communications, Modular COM View 1.05 MB 05/07/18
Accessories ACC View 827.5 KB 05/07/18
Weights WGHTS View 644.53 KB 05/07/18
Torque Specs & Supply Pressure Requirements APNDX View 1.03 MB 05/22/18
Copyright View 414.2 KB 03/03/17
REX Regulator BlowApart (low res) View 786.74 KB 11/23/16
KM 47 Blowaparts (low-res) View 984.68 KB 03/09/18
Communication Assemblies (low-res) View 728.61 KB 08/10/17
Neck Ring Assemblies (low-res) View 484.57 KB 08/22/17
Side Block (low-res) View 693.23 KB 08/04/17
Description and Operational Specifications DOS View 1.66 MB 05/07/18
General Preventative Maintenance GENPRE View 765.3 KB 05/07/18
Inspection and Maintenance IM View 477.59 KB 05/07/18
File Page Size Updated
General Information KMDSI Products INFO View 3.13 MB 05/07/18
Description and Operational Specifications DOS View 7.08 MB 05/07/18
General Preventative Maintenance GENPRE View 776.22 KB 05/07/18
Inspection and Maintenance IM View 104.83 KB 05/07/18
One Way Valve OWV View 495.42 KB 05/07/18
Overpressure Relief Valve OPRV View 289.91 KB 05/07/18
Bent Tube BNT View 2.93 MB 05/07/18
REX Regulator and Oral Nasal REX View 6.46 MB 05/07/18
Face Port, Port Retainer and Nose Block FCPRT View 2.46 MB 05/07/18
Handle on Fiberglass Helmets HNDL View 649.45 KB 05/07/18
Neck Ring Assembly, Locking Collar and Front Stand Offs NKDM View 4.24 MB 05/07/18
Chin Strap, Sealed Pull Pins and Swing Catch for Fiberglass Helmets BTM View 4.5 MB 05/07/18
Head Cushion, Head Cushion Foam Spacer (HCFS) and Chin Cushion HDCSH View 30.6 MB 05/07/18
Brass/Chromed Brass Side Block SB View 3.01 MB 05/07/18
Communications, Modular COM View 4.69 MB 05/07/18
Accessories ACC View 2.55 MB 05/07/18
Weights WGHTS View 856.67 KB 05/07/18
Torque Specs & Supply Pressure Requirements APNDX View 1.06 MB 05/22/18
KM 47 Blowaparts (high-res) View 2.47 MB 03/09/18
Communication Assemblies (high-res) View 784.17 KB 08/10/17
Neck Ring Assemblies (high-res) View 683.17 KB 08/22/17
Side Block (high-res) View 743.87 KB 08/04/17
REX Regulator BlowApart - High Resolution View 1.5 MB 11/23/16
Copyright View 34.49 KB 03/03/17
Appendix - [Low Resolution]
Thursday, December 10, 2015
  1. Updated torque specs throughout and changed type of Loctite® required on several parts.
Thursday, May 19, 2016
  1. Updated torque specs throughout and changed type of Loctite® needed.
Wednesday, July 20, 2016
  1. Updated the KM 57 location numbers and the 455 balanced regulator's P/N 530-099 Cover Retainer Screw torque.
Thursday, December 29, 2016
  1. Updated to accommodate the modularized BlowAparts.
Monday, April 24, 2017
  1. Updated the KM 47 locations due to its new modularity.
Tuesday, June 20, 2017
  1. Updated to accommodate the newly modular KMB 18, 28, SL 17B and 27 BlowAparts.
Monday, August 14, 2017
  1. Added note 3, allowable deviation: ± 8%.
Wednesday, August 23, 2017
  1. Updated communications BlowApart location numbers.
Tuesday, October 3, 2017
  1. Added P/N 550-560 Adjustment Lock Nut, REX to REX torque specs.
Friday, November 3, 2017
  1. Updated torque specs for the port retainer adapter and screw.
Thursday, March 15, 2018
  1. Added P/N 550-116 Nose Block Guide to fiberglass helmets and BandMask and updated location numbers due to adding the P/N 550-577 nose block guide to stainless steel helmets.
Tuesday, May 22, 2018
  1. Updated location numbers due to the removal of the P/N 550-076 inlet valve on the SuperFlow 350 BlowApart.
Inspection and Maintenance - [Low Resolution]
Thursday, May 3, 2018
  1. Split introduction module into four separate modules.
General Preventative Maintenance - [Low Resolution]
Thursday, May 3, 2018
  1. Split introduction module into four separate modules.
Description and Operational Specifications - [Low Resolution]
Thursday, May 3, 2018
  1. Split introduction module into four separate modules.
Weights - [Low Resolution]
Friday, May 4, 2018
  1. Updated layout.
Brass/Chromed Brass Side Block - [Low Resolution]
Monday, May 4, 2015
  1. Updated with front stand offs.
Friday, September 15, 2017
  1. Added free flow section.
Friday, December 29, 2017
  1. Added Air Train, Applying RTV Silicone KMB 28 section.
Thursday, May 3, 2018
  1. Updated the layout and cross references due to splitting the INTRO module into four separate modules.
REX Regulator and Oral Nasal - [Low Resolution]
Friday, February 27, 2015
  1. Updated with front stand offs and auxiliary port.
Thursday, May 3, 2018
  1. Updated layout.
Overpressure Relief Valve - [Low Resolution]
Thursday, May 3, 2018
  1. Updated layout and diagram.
One Way Valve - [Low Resolution]
Wednesday, March 15, 2017
  1. Updated the diagram of the one way valve exploded view.
Monday, June 19, 2017
  1. Corrected the orientation of the adapter in the BlowApart image.
Thursday, May 3, 2018
  1. Updated layout.
Neck Ring Assembly, Locking Collar and Front Stand Offs - [Low Resolution]
Friday, August 12, 2016
  1. Added the front stand offs.
Thursday, May 3, 2018
  1. Updated layout.
Head Cushion, Head Cushion Foam Spacer (HCFS) and Chin Cushion - [Low Resolution]
Friday, May 8, 2015
  1. Updated with auxiliary port and front stand offs.
Friday, April 14, 2017
  1. Updated entire module throughout, including new procedures for head cushion stuffing along with new images to accompany.
Thursday, May 3, 2018
  1. Updated layout.
Handle on Fiberglass Helmets - [Low Resolution]
Friday, February 27, 2015
  1. Updated with front stand offs.
Thursday, May 3, 2018
  1. Updated layout.
Face Port, Port Retainer and Nose Block - [Low Resolution]
Friday, August 8, 2014
  1. Updated Loctite® use for stainless steel helmets only in section 1.1.4 Face Port and Port Retainer Replacement, step 5.
Friday, February 27, 2015
  1. Updated with front stand offs.
Thursday, May 3, 2018
  1. Update title, layout and diagram.
General Information KMDSI Products - [Low Resolution]
Thursday, May 21, 2015
  1. Updated with current configurations of the MOD-1 and SuperMask and updated photos throughout module.
Tuesday, August 18, 2015
  1. Updated with current configurations of the MOD-1 and SuperMask and updated photos throughout module.
Friday, October 14, 2016
  1. Updated CE information and EXO product photo.
Monday, October 24, 2016
  1. Updated CE information.
Tuesday, January 31, 2017
  1. Added front cover page.
Tuesday, April 18, 2017
  1. Added serial number and CE diagrams for the SuperFlow, SuperFlow 350 and 455 regulators. Updated the packaging procedures for Band Masks.
Friday, September 15, 2017
  1. Added free flow section.
Thursday, May 3, 2018
  1. Split introduction module into four separate modules.
Communications, Modular - [Low Resolution]
Monday, May 4, 2015
  1. Updated with auxiliary port and front stand offs.
Thursday, May 3, 2018
  1. Updated layout.
Chin Strap, Sealed Pull Pins and Swing Catch for Fiberglass Helmets - [Low Resolution]
Tuesday, September 22, 2015
  1. Updated the verbiage throughout, including to service sealed pull pins annually.
Wednesday, November 8, 2017
  1. Added the pull pin overhaul and pull pin sleeve sections.
Thursday, May 3, 2018
  1. Updated layout.
Bent Tube - [Low Resolution]
Friday, September 12, 2014
  1. Added bent tube procedures for the REX regulator.
Monday, March 2, 2015
  1. Updated with front stand offs.
Tuesday, June 27, 2017
  1. Divided the module into three main sections based on regulator and updated the procedures.
Thursday, May 3, 2018
  1. Updated the layout and cross references due to splitting the INTRO module into four separate modules.
Accessories - [Low Resolution]
Thursday, May 3, 2018
  1. Updated layout.
KM 47 Blowaparts - [Low Resolution]
Tuesday, November 8, 2016
  1. Added the front stand offs and accompanying screw as separate part numbers, rather than the 525-116 kit.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly, added note that the nose block device includes the nose block pad and created modular BlowAparts.
Thursday, March 8, 2018
  1. Corrected the bent tube assembly w/O-rings part number from 555-155 to 555-168
Neck Ring Assemblies - [Low Resolution]
Wednesday, November 23, 2016
  1. No Changelog Available for BlowAparts.
Communication Assemblies - [Low Resolution]
Thursday, August 10, 2017
  1. Added the microphone assembly into the BlowApart.
Side Block - [Low Resolution]
Wednesday, November 23, 2016
  1. No Changelog Available for BlowAparts.
Copyright - [Low Resolution]
Friday, March 3, 2017
  1. Replaced raw text file with a PDF file.
REX Regulator - [Low Resolution]
  1. No changelog available for BlowAparts.