Home > Products > Helmets > Kirby Morgan 37SS

Kirby Morgan 37SS


KM37ss Top Tab

Kirby Morgan® 37SS

see the difference


  • 500-100 KM 37SS Helmet w/Posts
  • 500-101 KM 37SS Helmet w/MWPC

Standard Finish/Color

Note: available in one standard finish/color only.

Stainless Steel Shell

After x-ray inspection, each 316L stainless steel shell, is precision CNC machined to tight tolerances, to ensure proper fit to all other mating parts. The shell is durable and easy to maintain. Easily cleaned using a Scotch Brite® or similar type cleaning pad.

  • KM37SS


  • Neck Ring Assembly
    Neck Ring Assembly, Small, S.S.
    Part# 505-745
  • Neck Ring Assembly
    Neck Ring Assembly, Medium, S.S.
    Part# 505-746
  • Neck Ring Assembly
    Neck Ring Assembly, Large, S.S.
    Part# 505-747
  • Neck Ring Assembly
    Neck Ring Assembly, X-L, S.S.
    Part# 505-749
  • Neck Dam, Small
    Neck Dam, Small
    Part# 510-627
  • Neck Dam, Medium (Standard)
    Neck Dam, Medium (Standard)
    Part# 510-628
  • Neck Dam, Large
    Neck Dam, Large
    Part# 510-629
  • Latex Neck Dam, Small/Medium
    Latex Neck Dam, Small/Medium
    Part# 510-631
  • Latex Neck Dam, Medium/Large
    Latex Neck Dam, Medium/Large
    Part# 510-633
  • Replacement Foam Set
    Part# 510-672
  • Cold Water Neck Dam
    Cold Water Neck Dam, Small
    Part# 510-674
  • Cold Water Neck Dam, Medium
    Cold Water Neck Dam, Medium
    Part# 510-675
  • Cold Water Neck Dam, Large
    Cold Water Neck Dam, Large
    Part# 510-676
  • Chin Cushion
    Chin Cushion
    Part# 510-683
  • Neck Dam, X-Large
    Neck Dam, X-Large
    Part# 510-688
  • Latex Neck Dam, X-Large
    Latex Neck Dam, X-Large
    Part# 510-689
  • Head Cushion Assembly
    Head Cushion Assembly
    The fit of the head cushion is critical to both comfort and safety. The head cushion should be adjusted so that it assists in the proper seal of the oral nasal mask to the face. The head cushion is one out of a three part system. The Earphone holes are no longer present in the side pieces, but may be cut if the user prefers. The material is laser cut to prevent the edges from fraying or unraveling and has a handy loop attached to the liner for hanging and drying.
    Part# 510-754
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Regulator Flange Kit
    Part# 525-027
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Front Standoff Kit
    Part# 525-116
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Regulator Rebuild Kit
    525-309 Regulator Rebuild Kit
    For Helmets & KMB-BandMasks® with the “A”/“B” or SuperFlow® 350 Regulator.
    Part# 525-309
  • Side Block Rebuild Kit
    Side Block Rebuild Kit
    Part# 525-313
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Anode Kit, All SS Helmets
    Anode Kit, All SS Helmets
    Part# 525-375
  • Soft Goods Overhaul Kit, KM 37SS
    Soft Goods Overhaul Kit, KM 37SS
    Part# 525-380
  • Helmet Spares Kit, KM 37SS
    Part# 525-381
  • Conversion Kit, REX Regulator for 37SS
    Part# 525-395
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Head Cushion Foam Spacer (HCFS) Kit
    Part# 525-745
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • 525-770 Pull Strap Assembly Kit
    Part# 525-770
  • SuperFlow® 350 Regulator Assembly Kit
    Part# 525-771