- Weight:
- KMB 18 - 13.63 pounds
- KMB 28 - 12.73 pounds
- Mask Frame
- KMB-18: Fiberglass, polyester resin, polyester gel coat, and carbon fibers
- Mask Frame KMB-28: Xenoy thermoplastic
- Control Knobs:
- Polyurethane
- Lens:
- Scratch Resistant Polycarbonate
- Hood:
- Neoprene.
- O-Rings:
- Buna-N
- Recommended Lubricants:
- Christo-Lube®, Dow Corning® MS4 Silicone Lubricant. Krytox® and Halocarbon® are also acceptable.
- SuperFlow® 350 Performance. The SuperFlow® 350 regulator on the Kirby Morgan 18 & 28 masks offers high performance. The regulator has been tested at Dive Lab at Panama City, Florida. It meets all current U.S. Navy and European diving standards.
- Cage Code:
- The cage code for identifying KMDSI products for U.S. government purposes is 58366.
- CR Standards:
- These masks meet or exceeds all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.
- CE Approved:
- Both the KMB 18 and 28 are CE Approved.
- Use at water temperatures below 33o F (1oC) requires use of hot water shroud (P/N 525-100) and hot water.
- Umbilical minimum I.D. 3/8” (9.5 mm) of not more than two sections, total length not to exceed 600 feet (183m).
- This mask meets or exceeds all requirements of NPD, Health and Safety, (U.K.), United States Navy, ADCI United States and is CR rated by Dive Lab, Panama City, Fla., USA.
- Recommended overbottom (OB)gas supply pressure for best performance at depths are calculated by the formula (fsw x 0.445+14.7) + recommended p.s.i. g.
|
|
|
 |
